Black Box KVM2016A Manuel utilisateur

About Black Box

Black Box Network Services is your source for more than 118,000 networking

and infrastructure products. You’ll find everything from cabinets and racks and

power and surge protection products to media converters and Ethernet switches

all supported by free, live 24/7 Tech support available in 20 seconds or less.

BL A C K B O X®

Great tech support is just 20 seconds away

at 724-746-5500 or blackbox.com.

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

BL A C K B O X®

Extends your KVM from PS/2 or USB servers up to

100 feet (30 m) away.

Two users can control, monitor, and manage up to 16 or 32 servers

simultaneously.

Compatible monitors include VGA, SVGA, XGA, and UXGA and

higher.

Use with WIndows®Linux®, and other major operating systems.

ServSwitch™Multiuser Quick Start Guide

July 2009

KVM2016A

KVM2032A

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.

call 724-746-5500) FREE technical support 24 hours a day, 7 days a

week: Call 724-746-5500 or fax 724-746-0746 • Mailing address:

Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 1

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks, and

ServSwitch is a trademark, of BB Technologies, Inc.

Mac is a registered trademark of Apple Computer, Inc.

PS/2 is a registered trademark of International Business Machines Corporation.

Linux is a registered trademark of Linus Torvalds.

Windows is a registered trademark of Microsoft Corporation.

Novell is a registered trademark of Novell, Inc.

Solaris and Sun are registered trademarks of Sun Microsystems, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the

property of the trademark owners.

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 2

1. Introduction

All references throughout this guide to the KVM2016A also apply to the

KVM2032A. The two units are functionally the same. The KVM2016A has 16 server

ports, and the KVM2032A has 32 server ports.

The KVM2016A extends your KVM (keyboard, video, and mouse) from servers

with PS/2®or USB interfaces up to 100 feet (30 m) away. Two users can control,

monitor, and manage up to 16 servers simultaneously. You can connect a Power

Distribution Unit (PDU) for power management.

2. System Components

The system consists of:

• KVM2016A or KVM2032A

• Rackmounting kit

• Serial cable

• Power cord

• This printed Quick Start Guide

• A User’s Manual on CD-ROM

3. Compatibility

The KVM2016A is compatible with:

• PS/2 or USB interface computers/servers

• VGA, SVGA, or XGA monitors (UXGA and higher)

• Windows®, Linux®, and other major operating systems

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 3

4. The ServSwitch Unit

4.1 Front Panel

Figure 1 illustrates the front panel of either the KVM2016A or the KVM2032A.

Table 1 describes its components.

Power Link

Local

123

Figure 1. KVM2016A or KVM2032A front panel.

Table 1. Front panel components.

Number Component Description

1 Power LED Lights when unit is powered on

2 Link LED Lights when the unit is connected

to the network

3 Local LEDs Lights when the corresponding user is

1 and 2 administering a target

4.2 Back Panel

Figures 2 and 3 illlustrate the KVM2016A and KVM2032A back panels and Table

2 describes their components.

910 44

Figure 2. KVM2016A’s back panel.

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 4

910 4 4

Figure 3. KVM2032A’s back panel.

Table 2. Back panel components.

Number Component Description

4 User 1 and User 2 Connect (2) KVM consoles for

HD15 connectors (2) users to operate the ServSwitch

5 User 1 and User 2 Connect keyboards and mice for

USB Type A connectors (2) users to operate the ServSwitch

6 RJ-45 connector Attach the serial remote power switch

for RPS port

7 RJ-45 connector Connect to 10/100 Mbps Ethernet to

for Config port configure and update the unit

8 (16) or (32) RJ-45 Link to servers via SAMs

server ports

9 Power connector Connect 120 VAC power

10 I/O power switch Turns power on or off

5. Pre-Installation Guidelines

• Place cables away from fluorescent lights, air conditioners, and machines that

are likely to generate electric noise.

• Place the ServSwitch Multiuser on a flat, clean, and dry surface or install it in a

rack.

• Make sure that the maximum distance between each computer and the

ServSwitch doesn’t exceed 100 feet (30 m).

To rackmount the ServSwitch, refer to its user’s manual.

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 5

6. Connecting the System

Figure 4 illlustrates the ServSwitch Multiuser system overview.

Keyboard,

monitor, and

mouse connected

to KVM User 2

ports

PDU connected

to RPS port To servers SAMs

PDU

Figure 4. ServSwitch Multiuser system overview.

6.1 The SAMs

Each computer/server is directly connected to the ServSwitch Multiuser via the

appropriate SAM using CAT5 cable in a star configuration. No external power is

needed at the SAMs. They draw their power from the computer’s keyboard port

(SAM PS/2) or from the USB port (SAM USB). Figures 5 and 6 show the SAM PS/2

and the SAM USB.

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 6

To computer’s

video card

To computer’s

keyboard port

To computer’s

mouse port

Figure 5. SAM PS/2 (KV1120A).

To computer’s

video card

To computer’s

USB port

Figure 6. SAM USB (KV1121A).

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 7

6.2 Connecting a SAM PS/2

You can connect the SAM PS/2 to a powered on computer in the following order

(see Figure 7):

1. Connect the mouse connector to the computer’s mouse port.

2. Connect the keyboard connector to the computer’s keyboard port.

3. Connect the screen connector to the computer’s video port.

If you don’t follow the order listed above when connecting while the server is

running, the mouse may not function correctly until you reboot the server.

CAT5 cable to

switch server

port

To video port To keyboard

and mouse

ports

Figure 7. SAM PS/2 connections (KV1120A).

6.3 Connecting a SAM USB

The SAM USB supports Windows 98 SE and later, Mac®, Sun®, and SGI, and all

modern Linux distributions. Figure 8 shows the SAM USB.

To connect the SAM USB:

1. Connect the screen connector to the computer’s video port.

2. Connect the USB connector to the computer‘s USB port.

724-746-5500 | blackbox.com

ServSwitch Multiuser Quick Start Guide

Page 8

CAT5 cable to

switch server

port

To video port To USB port

Figure 8. SAM USB (KV1121A).

6.4 Connecting the CAT5 Cables

1. Attach one connector to the SAM’s RJ-45 port.

2. Connect the other connector to one of the ServSwitch Multiuser’s server

ports.

3. Repeat steps 1 and 2 for each computer.

6.5 Connecting the Two KVM Consoles

Connect a keyboard, monitor, and mouse to the user 1 and user 2 ports as

follows:

1. Connect the monitor connectors to the monitor ports.

2. Connect the keyboard connectors to the keyboard ports.

3. Connect the mouse connectors to the mouse ports.

6.6 Connecting to the Power Supply

1. Using the included power cord, connect the ServSwitch Multiuser to a socket

outlet that has a grounding connection. Use only the power cord you received

with the unit.

2. Switch on the unit.

Autres manuels pour KVM2016A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Extenseur

Black Box

Black Box ACU1500A Manuel utilisateur

Black Box

Black Box ACS261A-SM Manuel utilisateur

Black Box

Black Box AC550A Manuel utilisateur

Black Box

Black Box ACS4001A-MM Manuel utilisateur

Black Box

Black Box MTU9230 Manuel utilisateur

Black Box

Black Box ACU2500A-R2 Manuel utilisateur

Black Box

Black Box LB200A Manuel utilisateur

Black Box

Black Box LB300A-R3 Instructions d'installation et d'utilisation

Black Box

Black Box ServSwitch ACU1001A Manuel utilisateur

Black Box

Black Box LR0201A-KIT Manuel utilisateur

Black Box

Black Box AC1031A-2 Manuel utilisateur

Black Box

Black Box LB200A Manuel utilisateur

Black Box

Black Box MDR3242A Manuel utilisateur

Black Box

Black Box ACX2MT Series Manuel utilisateur

Black Box

Black Box IC280A-R2 Manuel utilisateur

Black Box

Black Box ServSwitch ACX310 Manuel utilisateur

Black Box

Black Box LB300A Instructions d'installation et d'utilisation

Black Box

Black Box EMD4000T Manuel utilisateur

Black Box

Black Box MEG201AE Manuel utilisateur

Black Box

Black Box LB304A Manuel utilisateur

Black Box

Black Box ICU504A Manuel utilisateur

Black Box

Black Box LB320A Manuel utilisateur

Black Box

Black Box MDR3243A Manuel utilisateur

Black Box

Black Box IC241AE Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur