Bkav SmartHome SH-CTxR Manuel utilisateur
MODEL: SH - CTxRZW
by Bka v
Bkav SmartHome technology company limited
USER GUIDE
TOUCH SWITCH
SH - CTxRZW
Electric shock may cause injuries or threats to
life. Before installing, repairing or cleaning the
device, you should check whether the device’s
power is disconnected.
This work should be done by technicians or
Customer Contact Center to avoid electric
related accidents.
Environmental regulations must be complied when
discarding or recycling the device or its wrapping.
Thank you for choosing touch switch SH – CTxRZW of Bkav
SmartHome. By selecting Bkav SmartHome’s products, you
will get the best warranty service and installation support
from our technicians.
This document gives useful information during installation
and usage time. You should read and keep the manual
carefully in case of need.
1
Warning
Usage notice
Copyright © 2015 Bkav SmartHome Co., Ltd. All rights reserved.
The touch switch SH - CTxRZW is the product of Bkav
SmartHome and has been registered regarding design,
utility solutions and quality certification. All violations such as
copies of design and product idea are subject to the current
copyright law of the Socialist Republic of Vietnam.
2
Usage notice
Table of contents
Safety instruction
Introduction
General introduction
Product package
Specifications
Wiring diagram
Installation instruction
Device usage
Function of direct control
Function of advanced features
How to restore default mode
Software installation
Contact
1
3
4
5
5
6
7
8
9
12
13
13
14
15
16
3
Table of contents
Warning
Do not use voltage which is different from the one
stated in the device’s specifications.
Disconnect device’s power prior to any installation,
disassembly or repair.
Do not leave the device in high-temperature
environment.
Do not disassemble the device if not necessary.
Do not clean the device with corrosive chemicals.
Safety instruction should be complied during the
device usage.
4Safety instruction
General introduction
The touch switch SH - CTxRZW (*) is used to turn on/off
from 1 to 4 on/off channels. With the design of the
capacitive touch technology, anti-scratch Gorilla Glass,
unibody aluminum, the device will make your house convenient
and luxurious.
Besides, Wi-Fi or ZigBee connection makes it easier to install
the device in existing houses or brand new ones without
re-arranging electric lines or changing their infrastructure.
The device is suitable to control home appliances such as
night lamps, fans, televisions, curtains, blinds, etc.
5
Introduction
Notice (*) Model SH - CTxRZ:The device uses ZigBee technology.
(*) Model SH - CTxR:X is the quantity of controlled
channels of the device
(from 1 to 4 channels)
(*) Model SH - CTxRW: The device uses Wi-Fi technology.
Product package
Touch-screen
control panel
Power circuit box
Receptacle box
Connecting
cable
User guide (book) Set of screws
6
MODEL: SH - CTxRZW
by Bkav
Specifications
Operating voltage
Power rating
100-240V 50/60Hz
97 x 93 x 43 mm
240 gram
5A max/1 channel
Operating temperature
Wi-Fi band
Dimensions (L x W x H)
Weight
60ºC max
2.4GHz - 802.11b/g/n
ZigBee frequency 2.4GHz
7
4321
N
L
Wiring diagram
8
100-240V 50/60Hz
* The quantity of channel depends on the product type of 1, 2, 3 or 4 buttons
(refer to page 05)
Made by SmartHome
COMCOM
OUT
2.2
OUT
2.1
OUT
1.2
OUT
1.1
L
100-240
VAC
N
Disconnect device’s power prior to installation.
Voltage:
Power rating:
Operating temperature:
100-240V 50/60Hz
5A max
60ºC max
Smart touch switch
Model: SH - CT4RZW-P
Made in Vietnam
by Bkav
Ce manuel convient aux modèles suivants
2
Table des matières
