Bkav AIView S201 Manuel utilisateur
Qualcomm products contained herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
The Made with Qualcomm Technologies logo is a trademark of Qualcomm Incorporated.
4k bullet
AI-BASED CAMERA
Model: S201
INSTALLATION GUIDE
Product Number: 0803F/0802N
PRODUCT KIT
Camera Rubber padWall bracket
3
Installation guide Drilling position decal
Ø10 mm, 3 holes
WALL DECAL FOR
DRILLING POSITION
Qualcomm products contained herein are products of QualcommTechnologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
The Made with Qualcomm Technologies logo is a trademarkof Qualcomm Incorporated.
4k bullet
AI-BASED CAMERA
Thank you letter
PRODUCT KIT
GPS antenna
Safety cable
Waterproof couplings
Hex socket head screws Hex tool
4
Set 3 of screws
and anchors
TECHNICAL SPECIFICATIONS
Power supply
Protection standards IP66, IK10
Resolution, frame rate UHD 3840 x 2160, 60 fps
Optical zoom
Field of view (horizontal - vertical)
Environmental conditions -40°C - 60°C (-40°F - 140°F)
Humidity 10 - 100%
S201-0803F: 3x
S201-0802N: 2x
Focal length S201-0803F: 10.9 - 29mm ± 5%
S201-0802N: 4.36 - 9.33mm ± 5%
S201-0803F: Near: 42° - 22.8° / Far: 15° - 8.4°
S201-0802N: Near: 87.06° - 58.11° / Far: 41.62° - 26.53°
Dimensions (L x W x H) L340 x W157 x H130mm
Mirco SD card External, up to 256GB
Weight 4kg
PoE IEEE 802.3af/802.3at
Maximum input 30W
5
PRODUCT OVERVIEW
6
Sunshield
PoE cable
Camera lens
Pivot point
Wall bracket
Waterproof coupling
Dust and waterproof
lens protector
Infrared LED
1 2
INSTALLATION GUIDE
Step 1: Fix the bracket onto the wall with the anchors and screws (Figure 1).
Step 2: Fix the camera onto the bracket and screw it in the place (Figure 2).
7
Drilling position decal
3 4
INSTALLATION GUIDE
Step 3: Insert security cable onto bracket and camera (Figure 3).
Step 4: Fix the security cable with screw onto bracket and camera (Figure 4).
8
ADJUSTING THE CAMERA VIEWING ANGLE
13
180°
90°
Use hex tool to loose the screw on camera bracket to adjust the camera's angle.
14
THE MEMORY CARD AND RESET INSTALLATION
Reset installation: Open the protective cover that protects the camera against dust and water to reset the device.
Memory card: Open the protective cover, you can find the location of Micro SD card.
Reset installation
Power off the camera, press and hold the factory reset button. Continue to hold the factory reset button
for another 10 seconds while powering the camera, the camera will be restored to factory settings.
Note:
Mirco SD card
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Bkav Caméra de sécurité
Bkav
Bkav AI View P400 Manuel utilisateur
Bkav
Bkav AI View S500-0233 Manuel utilisateur
Bkav
Bkav AI VIEW C100-0200 Manuel utilisateur
Bkav
Bkav AI VIEW ULTRA ZOOM BULLET S200 Manuel utilisateur
Bkav
Bkav AI View P200-0802GN Manuel utilisateur
Bkav
Bkav AI View P450-0802GN Manuel utilisateur
Bkav
Bkav AI VIEW C300-0200 Manuel utilisateur
Bkav
Bkav AI VIEW S500 Manuel utilisateur
Bkav
Bkav AI VIEW P450 Manuel utilisateur
Bkav
Bkav AI VIEW C300-0200 Manuel utilisateur
