BITREK BI 810 TREK Manuel utilisateur

DYSCOVI SYSTEMS RPE LIMITED

Company code 16303375, account №260075014037759

in «UKREXIMBANK» in Kyiv

MFI 380333, tax number 163033726585

95-S Vidradniy avenue, Kyiv, Ukraine, 03061. Phone +38044 507 02 07. Fax +38044 507 02 02. www.bitrek.eu, sale[email protected]

USER MANUAL

GPS TRACKER

BI 810 TREK

Version 2015.9.1.

Kyiv, 2015

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

Contents

1. Introduction..........................................................................................3

2. Purpose................................................................................................4

3. Appearance ..........................................................................................5

4. Package contents ..................................................................................6

5. Technical characteristics.........................................................................7

6. Pin assignment......................................................................................8

7. Device configuration ..............................................................................9

8. LED description ................................................................................... 14

9. Tracker installation .............................................................................. 15

10. Important points during equipment configuration ................................. 16

11. Conclusion ....................................................................................... 17

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

1.Introduction

Dear Partners!

Congratulations on your choice of products manufactured under the trademark

BITREKTM. Our team does everything possible to make you satisfied with your

choice, and make every effort for your comfortable work with our equipment.

We present to your attention the user manual of the BI 810 TREK device

(“tracker” on further). Here you will find information about the whole operation

process of the tracker –its technical characteristics, first configuration and after-

sales service, important points during equipment configuration. We hope that

you will be satisfied with the quality, reliability and stability of not only the

tracker BI 810 TREK, but also you will become our regular partner with other

models of equipment BITREKTM.

Actual equipment information and documentation is always available on our

official websites –www.bitrek.eu and www.bitrek.com.ua.

Enjoy!

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

2.Purpose

The tracker is used for online vehicle tracking and control using different

satellite tracking systems and transmission the data via mobile communication

with the support of additional sensors connection.

BI 810 TREK is using on moving and stationary objects, which have the

power supply.

BI 810 TREK is using for:

Geographical coordinates, speed and direction of movement definition;

Collection data from external devices and fixing signals from additional

sensors;

Remote control of executive devices;

Data transfer to server for the further processing by specialized software.

BI 810 TREK is recommended for monitoring:

Cars and minibuses

Trucks

Construction machinery

Agricultural machinery

Passenger transport

Railway transport

BI 810 TREK is not recommended for monitoring water

transport and the objects of observation with the placement in

the environment without special additional sealed boxes.

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

3. Appearance

Appearance of BI 810 TREK and antennas connectors is shown in figure 3.1:

Picture 3.1. BI 810 TREK appearance

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

4.Package contents

BI 910 TREK has the following package contents:

GPS tracker for moving objects BI 910 TREK –1 pc.

GSM-antenna (2 meters cable) –1 pc.

GPS-antenna for internal use (2 meters cable) - 1 pc.

Technical passport–1 pc.

Guarantee card –1 pc.

Packing box –1 pc.

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

5.Technical characteristics

Parameter

Characteristics

Data transfer

GSM 900/1800

Communication methods

GPRS, SMS for settings, voice

GPRS class

GPS and GSM antennas

External

Navigation system type

GPS/GLONASS/GALILEO/BEI

DOU

Digital interfaces

RS 485 –1 pc.

Accelerometer

Protected power circuit

SIM-cards

Digital inputs

2 (3 optional)

Digital outputs

Analog inputs

Digital inputs voltage range

from 0V to 40V

Supply voltage

12/24V

Typical current consumption (12V)

60mA

Maximum current consumption (12V)

350mA

Internal nonvolatile memory

2MB (65 000 records)

Built-in battery

1 000mA

Operating battery

from -30 °С to +80 °С

Dimensions (W х L х H)

125 х 95 х 29 mm

Weight

175 g.

Ingress Protection

IP65

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

6.Pin assignment

RS-485 “A”

RS-485 “B”

+Vin

GND

+Vout

Out1

DAT_high 1

An_in 1

DAT_low 1

Red

Black

Yellow

Blue

Orange

Green

An_in 2

Gray

White

Brown

Purple

Picture 6.1. BI 910 TREK pin assignment

№

Color

Contact name

Type of signal

Contact purpose

Red

+ Vin

Power supply

«+» On-board power supply (nominal

voltage 12 V or 24 V)

Black

GND

Power supply

Common wire (GND)

Yellow

+ Vout

Power supply

Protected input for additional sensors power

supply. Voltage equals + Vin. Maximum

current 350 mA.

Orange

Input / Output

Signal «А» RS-485

Green

Input / Output

Signal «B» RS-485

Blue

Ignition

Input

Active digital input «1» Reserved for

ignition signal.

Brown

DAT_low 1

Input

Active digital input «0»

White

An_in 1

Input

Analog input

Gray

An_in 2

Input

Analog input

Purple

Out 1

Output

Digital output

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

7.Device configuration

To configure the device you need to have BITREK CONFIGURATOR software,

which is available for free download from official BITREKTM websites

www.bitrek.eu or www.bitrek.com.ua.

System requirements:

Windows XP and newer;

Framework 4 and newer*;

From 1024 MB of random access memory;

From 50 MB of free disk space (including logs).

* How to check your current version of Framework:

https://support.microsoft.com/en-us/kb/318785/en-us.

How to update Framework:

https://www.microsoft.com/en-US/download/details.aspx?id=30653

How to update Framework on Windows XP:

https://www.microsoft.com/en-US/download/details.aspx?id=17851

7.1. Tracker to PC connection

To connect tracker to PC you need to have:

12-24 V power source.

BITREK programmer (USB-UART)

Picture 7.1. USB-

UART –top view

Picture 7.2. USB-

UART –bottom view

USB-A –USB-B cable to connect programmer

Picture 7.3. USB-A –USB-B cable

Special cable for tracker configuration

BI 810 TREK

BI 820 TREK

BI 820 TREK (OBD)

BI 310 CICADA

BI 868 TREK

Picture 7.4. Cable for tracker configuration

www.bitrek.eu

support@bitrek.eu

+380 44 507 02 07

To establish the connection you need:

7.1.1. Remove the tracker’s 4 screws on the bottom cover, and then remove the

top cover.

7.1.2. Connect cable for configuration to XP7 jack on the top chip. Red cable

must be connected to pins 1 both on tracker and programmer (picture 7.5).

7.1.3. Connect USB-A –USB-B cable with the narrow connector to

programmer, and with wide connector to any free USB-port of your PC.

7.1.4. Apply 12-24V power on tracker’s appropriate contacts (picture 6.1.).

BI 810 TREK

BI 820 TREK

BI 820 TREK (OBD)

BI 310 CICADA

XP7XP8

BI 868 TREK

Picture 7.5. Tracker to programmer connection

After tracker connection to PC is successful, your operating system will

automatically install driver for programmer. If the automatic driver installation

has not occurred, download it from the link

http://www.ftdichip.com/Drivers/VCP.htm or from BITREKTM corporate websites

www.bitrek.eu or www.bitrek.com.ua.

7.2. Remote tracker configuration

For remote configuration, you need to have a power source 12-24V and a GSM

modem with an activated SIM-card with available SMS service inserted in.

GSM-modems supported models *:

BITREK GSM-modem

Cinterion MC35i

*GSM-modems, which were tested with BITREK CONFIGURATOR.BITREK CONFIGURATOR

can work with any GSM-modem, connected to the COM-port of PC.

Activated SIM-card with available SMS and GPRS services must

be inserted in tracker. On SIM-card PIN-code verification needs

to be removed and the phone book needs to be empty. If you

are going to use voice communication, voice services also needs

to be activated on the SIM-card.

Table des matières

Autres manuels BITREK GPS

BITREK

BITREK BI-910 TREK Manuel utilisateur

BITREK

BITREK BI-810 TREK Manuel utilisateur

BITREK

BITREK BI-530P TREK Manuel utilisateur

BITREK

BITREK BI 530R TREK Manuel utilisateur

BITREK

BITREK BI 868 TREK Manuel utilisateur

BITREK

BITREK BI 820 TREK OBD Manuel utilisateur

BITREK

BITREK BI-530C TREK Manuel utilisateur

BITREK

BITREK BI-820OBD TREK Manuel utilisateur

BITREK

BITREK BI-868 TREK HW2 Manuel utilisateur

BITREK

BITREK BI-520L TREK Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur