BIRD RIDES BirdOne Manuel utilisateur
User Manual.
3
It’s ofcial: This Bird is yours. Thank you for choosing an electric ride to
cruise past trafc and reduce carbon emissions. As part of the ock,
every ride you take truly makes a difference.
Now let’s get you up and ying.
USER MANUAL 5
BirdOne
Assemble your
Bird.
6
13
10
18
11
19
Vehicle specications.
Riding.
Appendix
Maintenance. Troubleshooting.
Download
the Bird App.
Warnings, compliance
and disclosures.
Pair your
Bird One.
Contact Information.
USER MANUAL 7
BirdOne
THROTTLE
BELL
BRAKE LEVER
NECK
TAILLIGHT
HEADLIGHT
KICKSTAND
CHARGING PORT
MOTOR
DRUM BRAKE
SCREWS
4
WRENCH
1
POWER SUPPLY
1
Assemble your Bird
Your Bird One is partially assembled already, so
you’ll only have to do a few things to get riding.
First, locate the four screws, wrench, and power
supply.
A full list of Bird One’s specications can be
found on page 22.
USER MANUAL 9
BirdOne
Attach the console with handlebars to the
neck of your Bird so that the headlight faces
forward. Then, use the wrench to secure the
four screws in the holes below the console.
STEP ONE: ASSEMBLY STEP TWO: CHARGING
Once you’ve assembled your Bird, it’s time to
charge. Use the included power supply and
connect it to the charging port. Do not charge
your Bird if either your Bird’s charging port or
power supply are wet. If either are wet, wait for
them to dry and then begin charging.
Once assembled and charged, your Bird One is
ready to be paired with the Bird app.
USER MANUAL 11
BirdOne
Think of the app as the key to your Bird. It’s
similar to riding a Bird in the wild, except you
have an added feature: the My Bird page. Once
downloaded, open the app and create your Bird
account.
Pair your
Bird One
Download the
Bird app
Open the Bird app and select the
Ride button at the bottom of the screen to
scan your Bird’s QR code and begin pairing.
Make sure your phone has Wi-Fi and Bluetooth
turned on, you will need both to connect to your
Bird.
Aim your phone’s camera at the QR code
located on the right handlebar and wait for scan
to complete.
1
1
Having difculty pairing? Jump to our
troubleshooting guide on page 19 for help.
USER MANUAL 13
BirdOne
USING MY BIRD
After your Bird has been paired, open up the
App Menu in the top left of the screen and select
My Bird from the menu. My Bird helps you access
and manage the features of your Bird.
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Black Pin: This is your Bird. The pin shows the
approximate GPS location of your Bird.
Bird Code: The unique ve-character code
assigned to all Birds. It can also be found beneath
the QR code on your Bird.
Last Located: The amount of time that has passed
since you last located your Bird via the in-app GPS.
Last Ridden: The amount of time that has passed
since you last used your Bird via the Ride button.
Battery: Your Bird’s current battery charge.
Serial Number: A unique set of numbers assigned
to every Bird. Yours can also be found on the
sticker near the bottom of the Bird.
Unpair Button: Use this to transfer ownership to
another account.
Let’s ride
Once your Bird One is fully charged, you can
unplug it and start your rst ride with the app.
Just tap Ride and scan your Bird’s QR code
to unlock the wheels. Your Bird will chirp if you
move it while locked.
Remember, Bluetooth and Wi- must be
enabled to lock and unlock your Bird.
1
1
For your safety, always wear a
helmet while riding.
USER MANUAL 15
BirdOne
BRAKE
ACCELERATOR
KICKSTAND
STARTING AND STOPPING
Hold down the Accelerator (right thumb
throttle) to go faster (up to 18 mi/h).
Use the Brake (front or rear) to slow down and
stop.
Deploy the Kickstand when you are not using
your Bird.
WHERE TO RIDE
We recommend riding in bike lanes or close to
the curb in the street.
It’s important to note there are locations that do
not permit e-scooter riding or parking; please
always follow local rules and laws.
In certain areas, no-ride and no-park zones may
be outlined in red on the map in the Bird app.
Keep these areas in mind when you plan for trips
so you can take alternate routes if needed.
1
1
USER MANUAL 17
BirdOne
AFTER YOU RIDE
Once you’re done riding, you can park and lock
your Bird. This will lock the wheels and turn
off the lights. If your Bird is left locked, it is still
powered on and will deplete the battery, so we
recommend charging it once you’ve completed
your last trip.
After you ride, be sure to charge your Bird via
the Charger Port to ensure it’s always ready to
ride when you need it.
Keep in mind that powering on the Bird again
will require a Bluetooth and Wi-Fi connection.
UNPAIRING YOUR BIRD
You can also Unpair your Bird with the Bird app.
This option makes it easy to transfer ownership
to someone else, either temporarily or if you sell
your Bird.
To unpair your Bird One, open the App Menu in
the top left of the app and select My Bird from
the menu. In the My Bird screen tap the
Unpair button.
After you Unpair, your account will no longer be
associated with the Bird. To connect it, you’ll
need to Pair it again.
CHARGE PORT
1
1
USER MANUAL 19
BirdOne
1. No Zeros
Prevent delays by keeping your Bird charged.
2.Clear Skies
Avoid riding your Bird during and after wet or
extreme weather conditions (rain, snow, etc.).
3. The art of Bird maintenance
Examine the following Bird parts periodically to
keep your Bird in great shape. As always, we’re
here to help should an issue arise.
4.Gimme shelter
If you leave your Bird outside, keep it dry by
placing it under a cover. Take your Bird inside
in case of extreme weather conditions and
temperatures.
5. Keep it clean
If your Bird gets dirty from rough terrain or heavy
use, just give it a quick wipedown.
Use a soft, wet cloth for basic cleaning.
Use a toothbrush for scrubbing.
Do not use corrosive cleaning chemicals that
may damage your Bird. These include:
— Gasoline
— Acetone
— Alcohol
Maintaining your Bird One
Hand brakes: The wheel should not rotate
when braking—test it by rolling your Bird
around.
Tires: Make sure the tires are in good
condition and still have sufcient tread.
Fenders: Both the front and rear wheel
fenders should be in place and connected
securely to the frame.
Troubleshooting
1
I can’t scan my QR code during setup.
Tap the QR Code Input Button
and type in the digits below the
QR Code.
1.
2
Tap the Flashlight Button to turn on
your ashlight if it’s too dark for your
phone’s camera to scan.
2. 3
If you receive a Trouble Connecting error after
scanning:
Double check that your Wi-Fi and Bluetooth are
enabled on your phone.
1 3
2
Table des matières
Autres manuels BIRD RIDES Scooter
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur