•To reduce the risk of electric shock,
do not remove cover; no user-
serviceable parts inside. Always refer
servicing to qualified service
personnel. Remove the cover will void
the warranty.
•Do NOT try to fix the unit yourself! All
service or repairing work must be
performed by an authorized and
qualified technician.
•All plumbing should be completely set
up before plugging power to power on.
•Ensure all water inlets and outlets are
connected to corresponding hoses
and are properly installed.
•To protect your investment, if the input
water pressure may exceed 7.0
kg/cm2(100 psi), a flow pressure
regulator must be installed prior to
input.
•Always make sure that all the
connecting hoses allow free flow of
water during operation.
•Ensure the power supply meet the
requirements as indicated in the
product specifications. Follow all
applicable electrical codes.
•Risk of electric shock. Always use a
well-grounded, 15A or above
individual socket. Do NOT use loose
or defective socket.
•To prevent accidental shock we
recommend this product always be
used on a GFCI (Ground fault Circuit
Interrupter) outlet.
•Risk of electric shock. Do NOT put the
machine in water or spray water into it.
Otherwise it may damage the unit or
cause electric shock.
•Do not pull the power cord. Never
touch power cord or power outlet with
wet hands.
•Do NOT use a damaged power cord.
Do NOT stretch, twist or tie power
cord during use. Do NOT press power
cord.
•In the event that water gets into power
supply, unplug the power cord and
completely dry power outlet.
•Do NOT operate the system if:
oThe cord or plug is damaged.
oThere is no input water supply.
oThe system has malfunctioned.
oThere is any noticeable damage to
the system. Contact your regional
distributor or authorized service
agency for examination, repair or
replacement.
•WARNING – To reduce the risk of
electric shock, replace damaged cord
immediately.
•Do NOT block the vent at the back of
the machine, as this will impair the
efficiency of the system.
•Do not use the unit in a dusty place.
This may cause the unit to malfunction.
•Do not spray water on the main unit.
Do not clean with a damp cloth or any
chemicals, which may leak into the
unit.
•Do not place this unit on an uneven
surface. Do not drop or use excessive
force on this unit.
•Do not poke or scratch the touch pad
or LCD display with sharp objects.