BINBOK VR T3 Plus Manuel utilisateur
VR39-1
VR
BINBOK VR T3 Plus
For Meta/Quest 3
01
3. Top Strap
1. Right Side Strap 2. Left Side Strap
4. Rear Fit Wheel
5. Battery Cable
7. Cable Clip
6. Rear Brace
8. Charging Port
9. Power Button 10. Charging Port
9
108
02
Step 1 Attach the Rear Brace to the Strap
Clip the rear brace into the strap according to the corresponding
R and L letters-you will hear a clear "click" as it attaches.
03
Step 2 Install the Top Strap
Thread the top strap through the bracket of the rear brace.
Smooth side down.
04
Step 3 Pull Out the Facial Interface
Remove the facial interface from the Quest 3 headset.
05
Step 4 Thread and Fasten the Top Strap
Thread the top strap through the bracket in the front of the
Quest 3 to fasten it.
06
Step 5 Attach Side Straps
Hook the strap sides to the arms of the headset snap on by
applying pressure down.
07
Step 6
Re-insert the facial interface and snap it into place.
08
Step 7 Attach the magnetic battery to the
head strap
Align the magnetic battery contacts with the pins on the head
strap to attach the battery to the head strap and begin
charging.
09
X 1
Simultaneous Charging
To charge the Quest 3 headset and head strap battery at the
same time, make sure to connect the battery cable from the
strap to the headset's USB-C port, and press the power button
once after plugging it into the charger.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BINBOK Casque de réalité virtuelle
