Binary B-520-MTRX-230-4x4 Guide rapide

Source | Mute | 2ch

(HDMI Out Audio)

CONFIGURATION

UTILITY MANUAL

HDMI MATRIX SWITCHER

B-520-MTRX-230-

4x4, 6x4+2, 8x8 &16x16

This symbol, a lightning flash with arrowhead, drawn within

an equilateral triangle, is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of re or electric shock, read and follow all instructions and warnings in this manual. Keep this

manual for future reference.

1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and

ensure that no objects lled with liquids, such as vases, are placed on the equipment. Do not use this apparatus

near water.

2. Do not remove cover. No user serviceable parts inside.

3. Clean only with a dry cloth.

4. Do not block any ventilation openings. Install according to manufacturer’s instructions.

5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including

ampliers) that produce heat.

6. Do not override the safety purpose of the polarized or grounding plug. A polarized plug has two blades, one

of which is wider than the other. A grounding plug has two matching blades and a third grounding prong. The

wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched, particularly at the plug end and where the power

cord is attached to the apparatus.

8. Only use attachments and accessories specied by the manufacturer.

9. Refer all servicing to qualied service personnel. The apparatus requires service when it is damaged in any way

(for example: when the power supply cord or plug is damaged, when liquids have been spilled onto or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.)

10. To completely disconnect this equipment from power, disconnect the power supply cord from the power

outlet.

LEGAL NOTICE

CAUTION

CAUTION: TOREDUCE THE RISK OF

ELECTRICAL SHOCK.

DONOT REMOVE COVER. NOUSER

SERVICEABLE PARTS INSIDE.

REFER SERVICINGTOQUALIFIED

SERVICE PERSONNEL.

CONTENTS

1. Overview ......................................................................................................................................................................................................................4

2. Models ......................................................................................................................................................................................................................4

3. Package Contents......................................................................................................................................................................................................4

4. Downloading the utility...........................................................................................................................................................................................5

5. Utility File Location...................................................................................................................................................................................................5

5.1. B-520-MTRX-230-16x16 Files................................................................................................................................................................5

6. Communicating with the B-520-MTRX-230 ..................................................................................................................................................5

6.1. Serial Connection..........................................................................................................................................................................................5

7. Installation & Setup...................................................................................................................................................................................................6

7.1. Basic Installation Diagram ........................................................................................................................................................................6

7.2. COM Port Settings........................................................................................................................................................................................6

7.3. Initializing Communication .......................................................................................................................................................................6

7.4. Stopping Communication...........................................................................................................................................................................6

8. EDID Conguration..................................................................................................................................................................................................7

8.1. Display EDID for Particular Input/Output..........................................................................................................................................7

8.2. Display EDID for All Inputs / Outputs...................................................................................................................................................8

8.3. Save Conguration for Inputs / Outputs..............................................................................................................................................8

8.4. Learn EDID to Input .....................................................................................................................................................................................9

8.5. Auto EDID Learn............................................................................................................................................................................................10

9. Advanced Setup Using the Conguration Utility..........................................................................................................................................10

9.1 Output Control................................................................................................................................................................................................10

10. Firmware Update....................................................................................................................................................................................................11

11. Network Conguration ........................................................................................................................................................................................11

12. Resetting Factory Defaults.................................................................................................................................................................................12

13. Other Settings..........................................................................................................................................................................................................12

13.1. IR Source Routing.......................................................................................................................................................................................12

13.2. Front Panel IR Enable................................................................................................................................................................................12

13.3. System IR Enable ........................................................................................................................................................................................12

13.4. Matrix Control from Room Enable ......................................................................................................................................................13

13.5. Front Panel Power Button Active ........................................................................................................................................................13

14. Input / Output Operation ....................................................................................................................................................................................13

14.1. Connection Status......................................................................................................................................................................................13

14.2. Input/Output Control ...............................................................................................................................................................................14

15. Appendix: Conguration Utility Home Screens .........................................................................................................................................14

15.1. B-520-MTRX-230-4x4 .............................................................................................................................................................................14

15.2. B-520-MTRX-230-8x8/6x4+2..............................................................................................................................................................15

15.3. B-520-MTRX-230-16x16........................................................................................................................................................................15

16. Contacting Tech Support .....................................................................................................................................................................................16

17. Warranty ....................................................................................................................................................................................................................16

1. OVERVIEW

This manual outlines the operation and use of the B-520-MTRX-230 PC-based Conguration Utility software.

Please read through the entire document before attempting to congure a B-520-MTRX-230. Should you have

any questions after reading this document, please contact SnapAV Technical Support.

2. MODELS

The following models are covered in this manual. The functionality of the Conguration Utility is very similar for all

models. Any signicant differences are covered by model.

• B-520-MTRX-230-4x4

• B-520-MTRX-230-6x4+2

• B-520-MTRX-230-8x8

• B-520-MTRX-230-16x16

3. PACKAGE CONTENTS

Before you begin, make sure the following items are available and ready for use:

• B-520-MTRX-230

• B-520-MTRX-230 Installation Manual

• PC running Windows XP or newer Windows OS

• Serial Cable to connect the B-520-MTRX-230 to the PC

• DB9 to USB adapter (if the PC does not have a serial port built-in)

• List of the sources (Inputs) and displays (Outputs) used in the system (consult system chart in the B-520-

MTRX-230 manual)

• Knowledge of this document and the devices being used in the system

4. DOWNLOADING THE UTILITY

The software utility is included on the CD provided with the B-520-MTRX-230 and can also be downloaded from

the product page at www.SnapAV.com. Check the site for periodic updates to ensure that the latest version of the

utility is being used.

5. UTILITY FILE LOCATION

The B-520-MTRX-230 software utility is a standalone program that does not require installation. After

downloading the utility, unzip the downloaded le to a location that is easy to remember and locate when needed,

like the example below:

• C:\My Documents\Binary\B-520-MTRX-230\CongurationUtility

5.1. B-520-MTRX-230-16x16 Files

There are 2 additional “.DLL” type les included with the utility “EXE” that must be placed in the same folder as the

utility.

6. COMMUNICATING WITH THE B-520-MTRX-230

6.1. Serial Connection

The B-520-MTRX-230 and PC communicate over DB9 straight-through serial cable. Before connecting, verify that

the pin conguration of the cable matches the diagram below.

Should the PC not have a built in DB9 connection, a USB to RS-232 adapter may be used, however it is strongly

recommended that rmware updates are not performed using an adapter.

3 25

Matrix DB9

Female Connecon

532

PC Serial DB9

Male Connecon

GND

TxD-Rxd

Rxd-Txd

B-520-MTRX-230

Pin 2 TxD (Data Transmit)

Pin 3 RxD (Data Receive)

Pin 5 GND

Computer

Pin 2 RxD (Data Receive)

Pin 3 TxD (Data Transmit)

Pin 5 GND

FIGURE 1

7. INSTALLATION & SETUP

7.1. Basic Installation Diagram

Complete the basic installation section to set up the matrix switcher for media distribution before completing any other

setup. Use this diagram for reference during basic installation of the matrix switcher, sources, displays and wiring.

7.2. COM Port Settings

The COM port on the PC should be set to 9600 Baud, 1 Stop Bit, No Parity.

Select the COM port on the computer that is connected to the B-520-MTRX-230 from the list of available COM

ports.

If the connected COM port does not appear in the list, refer to the PC’s “Device Manager” to verify that COM

ports have been installed and have the right communication settings. Find the Device Manager by searching from

the Start menu search bar, or go to Control Panel > Devices and Printers > right-mouse-click and select “Device

Manager.”

7.3. Initializing Communication

Select the “Connect” button to initiate communication between the B-520-MTRX-230 and the computer.

Once connected:

• Button name will change to “Disconnect”

• Status box will change to “Connected” and turn green.

If this does not occur after a few moments, perform these steps:

1. Verify that the correct COM port is selected;

2. Verify communication settings on the PCs COM port;

3. Verify that the cable has the correct PIN conguration and that it is functioning correctly.

If communication cannot be established after performing these steps, please contact SnapAV tech support.

7.4. Stopping Communication

Click the “Disconnect” button to stop communication between the B-520-MTRX-230 and the computer.

Priyanka to send an updated Screen cap of this one.(GCB)

8. EDID CONFIGURATION

The purpose of EDID Conguration is to set the EDID for each input appropriately. This EDID will be passed to the

connected source input. Unless the source has a xed audio or video format, it will transmit content at the best

audio and video formats that do not exceed the capabilities specied in the EDID. Note that all outputs on the

B-520-MTRX-230 receive the same audio and video format.

For example, assume you have two displays (Outputs) that will view the source connected to Input 1. One of the

displays is capable of 7.1 multi-channel audio but the other is only capable of stereo audio. In this case, you will

store an EDID in Input 1 that restricts the audio to stereo so that both display outputs will produce audio.

Select “Congure EDID’s” to access EDID congurations.

NOTE: If the PC is not communicating with the B-520-MTRX-230, a “NOT CONNECTED” window will appear.

FIGURE 2

8.1. Display EDID for Particular Input/Output

Read EDID allows you to read the currently stored EDID for each Input and to read the EDID from display (if any)

connected to each HDMI and HDBaseT output. Note that EDIDs for the Inputs are displayed in the upper left box

while EDIDs for the outputs are displayed in the lower left box.

1. Select an input or an output from the dropdown list:

2. Select READ to display the information.

3. The EDID values for the selected Input or Output will be displayed on the left side of the screen.

8.2. Display EDID for All Inputs / Outputs

1. READ ALL will read and display the currently assigned EDID for each Input and the EDID from each connected

display.

2. The EDID values for all Inputs and Outputs will be displayed on the left side of the screen.

8.3. Save Conguration for Inputs / Outputs

This function allows you to save an EDID to disk for future use. A common use of this function is storing the EDIDs

for commonly used TVs on disk. These can be recalled from disk (see EDID Learning below) and stored in the EDID

Input locations even if the display is not currently connected.

1. Select an input or an output from the dropdown list:

1. Click “READ” to display the information.

2. Click “SAVE” to save the le.

3. Browse to the location of your choice to save the conguration le.

Suggested Folder Location:

C:\My Documents\Binary\B-520-MTRX-230\EDIDCongurations

FIGURE 3

4. Create a name for the le that clearly describes the contents.

8.4. Learn EDID to Input

The following examples are for the B-520-MTRX-230-8x8, but apply to all models.

EDIDs are learned into the B-520-MTRX-230 via the HDMI and HDBaseT output connections.

If you are learning from a connected display, the steps below can be followed to learn EDIDs from a display into the

B-520-MTRX-230:

1. Select the location of the device whose EDID you will learn from in the EDID Learning “From” dropdown list:

Available Choices

NOTE: When “From File” is selected, a window will open when you learn (Step 3 on next page) that allows you to

navigate to the location where an EDID conguration le was saved. Select the desired le and select “Open”.

1. Select an Input to learn to in the “EDID Learning TO” dropdown list:

Available Choices

2. Select the LEARN button

The selected EDID is stored in the selected Input locations.

8.5. Auto EDID Learn

The B-520-MTRX-230 includes an automatic function that will determine the EDID with the best quality video

that will work with all connected displays.

If all sources (Inputs) are to be viewable on all Displays (HDMI and HDBaseT Outputs), this function provides an

easy mechanism for determining the EDIDs to store in all Inputs.

If some sources (such as a Blu-Ray player) are only viewed on some displays (Outputs), this method may provide a

more restrictive EDID than desired for some displays (Outputs).

To see the results of Auto Learn, Read EDID from Input 1. This EDID is stored in all Input EDID locations.

NOTE: Auto EDID sets audio to 2ch for all inputs regardless of the capability of the connected displays. If multi-

channel audio is desired, embedded EDIDs or Learned EDIDs will need to be used.

9. ADVANCED SETUP USING THE CONFIGURATION UTILITY

9.1 Output Control

Selecting “View Outputs” opens a window that allows outputs to be turned on or off. This can be used for

troubleshooting the B-520-MTRX-230 and connections.

FIGURE 4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Binary Changer

Binary

Binary B-220-HDSWTCH-3x1 Manuel utilisateur

Binary

Binary B-260-SWTCH-4X1 Mode d’emploi

Binary

Binary B-900-MOIP-4K-CTRL Manuel utilisateur

Binary

Binary B-660-MTRX-4X2 Manuel utilisateur

Binary

Binary B-240-HDSWTCH-3X1 Manuel utilisateur

Binary

Binary B-300-HDMATRIX-4x4 Manuel utilisateur

Binary

Binary B-660-MTRX-4X2 Manuel utilisateur

Binary

Binary B-USB3-HUB4P Manuel utilisateur

Binary

Binary B-USB2-HUB4P Manuel utilisateur

Binary

Binary B-260-SWTCH-4X1 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur