Billion BiPAC 7202 Manuel utilisateur

BiPAC 7202 / 7202GR2

(802.11g) ADSL2+ Router

Quick Start Gui e

All manuals and user guides at all-guides.com

all-guides.com

All manuals and user guides at all-guides.com

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Package Contents

BiPAC 7202 series ADSL2+ Router

CD-ROM containing the on-line manual

R -11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide





 Do not use the router in high humidity or high temperatures.





 Do not use the same power source for the router as other

equipment.





 Do not open or repair the case yourself. If the router are too hot,

turn off the power immediately and have it repaired at a qualified

service center.





 Avoid using this product and all accessories outdoors.

Warning





 Place the router on a stable surface.







Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

Attention

For more detailed instructions on configuring and using the

(802.11g) ADSL2+ Router, please refer to the on-line

anual.

All manuals and user guides at all-guides.com

Quick Start Gui e

The Front LEDs

BiPAC 7202

BiPAC 7202GR2

LED Meaning

1 PPP :

Lit steady when there is a PPPoA / PPPoE connection.

2 ADSL:

Lit when successfully connected to an ADSL DSLAM (“linesync”).

3 LAN Port:

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

WLAN :

(7202GR2

only)

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

5 SYS :

Lit when the system is ready.

6 PWR :

Lit when power is ON.

All manuals and user guides at all-guides.com

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

The Rear Ports

BiPAC 7202

BiPAC 7202GR2

Port Meaning

1 Power Switch

Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

RESET

(

Emergency/Fai

lure Recovery)

1. After the device is powered on, press it to perform Failure

recover for a dead routers:

Simply hold the Emergency/Failure Recovery Button” when power

on the routers and download the Application if necessary.

2. perform the Emergency Recover for the missing Password

case:(Using LEDs indications)

Simply hold the Emergency/Failure Recovery Button, when router

can be accessed from GUI, until the LEDs all turn Off, turn On and

then Turn Off. Then, router will perform configuration factory reset

and router reboot

LAN

(RJ-45

connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four

LAN ports when connecting to a PC or an office/home network of

10Mbps or 100Mbps.

ADSL

(LINE)

Connect the supplied R -11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

All manuals and user guides at all-guides.com

Quick Start Gui e

Connecting BiPAC 7202

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR an SYS LEDs are lit steadily and that the relevant LAN LED is lit.

All manuals and user guides at all-guides.com

all-guides.com

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Connecting BiPAC 7202GR2

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS, an WLAN LEDs are lit steadily and that the relevant LAN LED is

lit.

All manuals and user guides at all-guides.com

Quick Start Gui e

Configuring PC in Win ows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP a ress

automatically and the Obtain DNS server

a ress automatically radio buttons.

6. Click OK to finish the configuration.

All manuals and user guides at all-guides.com

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Configuring PC in Win ows 2000

Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network an Dial-up

Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP a ress

automatically and the Obtain DNS server

a ress automatically radio buttons.

6. Click OK to finish the configuration.

Configuring PC in Win ows 98/Me

All manuals and user guides at all-guides.com

Quick Start Gui e

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP a ress

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Configuring PC in Win ows NT4.0

All manuals and user guides at all-guides.com

Autres manuels pour BiPAC 7202

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Billion Routeur sans fil

Billion

Billion myGuard 7202G Manuel utilisateur

Billion

Billion BiPAC 6200WZL R2 Manuel utilisateur

Billion

Billion BiPAC 7300W Manuel utilisateur

Billion

Billion BiPAC 7300NX Manuel utilisateur

Billion

Billion BiPAC 6300NX Manuel d'installation et d'exploitation

Billion

Billion SG600R2 Manuel utilisateur

Billion

Billion BIPAC 6500W Manuel utilisateur

Billion

Billion BiPAC 7800X Manuel utilisateur

Billion

Billion BIPAC 6500 Manuel utilisateur

Billion

Billion BiPAC 6300NXL Manuel utilisateur

Billion

Billion 7800VDP(O)X Manuel utilisateur

Billion

Billion 7800VDP(O)X Manuel utilisateur

Billion

Billion BiPAC 8500 Manuel utilisateur

Billion

Billion 400G Manuel utilisateur

Billion

Billion BiPAC 7500G Manuel utilisateur

Billion

Billion BiPAC 74xx series Manuel utilisateur

Billion

Billion BiPAC 7800(N)X(L) Manuel utilisateur

Billion

Billion BiPAC 7800DXL Manuel utilisateur

Billion

Billion BiPAC 7300GX Manuel utilisateur

Billion

Billion BIPAC-6500 Manuel utilisateur

Billion

Billion BiPAC 8800NL R2 Guide de configuration

Billion

Billion BiPAC 5200N RC Manuel utilisateur

Billion

Billion BIPAC-840 Manuel du propriétaire

Billion

Billion BiPAC 7300 Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur