ENGLISH
Installing the "YCC365 Plus" application
1. Make sure your smartphone is connected to the 2.4 Ghz WIFI network.
1. To check if your WIFI is emitting well on the 2.4 Ghz network, click here..
1. Download the "YCC365 Plus" app from the Apple Store (iOS) or the Google Play Store
(Android).
Creating the user account
1. Open the "YCC365 Plus" app and click "Sign up" to create a new account.
2. Validate your email address by clicking on the link received in the confirmation email.
-If you haven't received anything, check your email address and spam.
-If this still doesn't work, try connecting with another address.
3. If you already have an account, log in directly.
Adding a camera
1. Plug in the camera electrically and wait for its initialization (about 45 seconds).
1. The camera rotates left-right
2. A voice message is heard
2. Once the initialization is complete, click on "O" to add a camera.
3. Choose "Smart Camera" and then "Appaire by scanning the QR Code."
1. If "Smart Camera" is not available, click "Camera Dome."
4. Click "Next."
5. Press the RESET button until you hear voice confirmation (about 5 seconds).
1. The camera resets, rotates and confirms again with a voice message.
6. Once the initialization is complete, enter the password (WIFI security key).
1. The app must automatically detect WIFI, if not, click here..
2. The password is the password to connect to your WIFI. Be careful, the capital and
lower case must be respected.
7. Position the phone in front of the camera lens, (about 10-15 cm) and wait for the "beep
beep" confirmation.
1. If the camera doesn't beep, make sure the phone's brightness is full, you're not
backlighting
2. , the phone is well at 10-15 cm without moving too fast.
1. Once the camera beeps twice, click next.
1. If the connection fails, click here..
2. It's over!
