Biasi SG 2 Fiche technique

Biasi SG Series Page 1

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any a liance

• Do not touch any electric switch; do not use any hone in you r building

• Immediately call your gas su lier from a neighbor’s hone. Follow the

gas su lier’s instructions.

• If you can not reach your gas su lier call the fire de artment

Installation and service must be erformed by a qualified installer, service

agency or the gas su lier.

Please Read Instructions Carefully

Save for Future Reference

Distributed By:

Distributed By:Distributed By:

Distributed By:

QHT

QHTQHT

QHT

QUINCY HYDRONIC TECH

QUINCY HYDRONIC TECHQUINCY HYDRONIC TECH

QUINCY HYDRONIC TECHNOLOGIES, INC.

NOLOGIES, INC.NOLOGIES, INC.

NOLOGIES, INC.

35 0 LAFAYETTE RD

35 0 LAFAYETTE RD35 0 LAFAYETTE RD

35 0 LAFAYETTE RD

PORTSMOUTH, NH 0380

PORTSMOUTH, NH 0380PORTSMOUTH, NH 0380

PORTSMOUTH, NH 03801

PHONE: 03

PHONE: 03PHONE: 03

PHONE: 03-

-334

334334

334-

- 400

400400

400

FAX: 1

FAX: 1FAX: 1

FAX: 1-

-877

877877

877-

-334

334334

334-

- 401

401401

401

WWW.QHTINC.COM

WWW.QHTINC.COMWWW.QHTINC.COM

WWW.QHTINC.COM

REV. J

If the information in this manual is not followed exactly, a fire ex losion

may result causing ro erty damage, ersonal injury or loss of life.

WARNING

DANGER

SG Series Boiler

SG/2 - SG/7

Boiler Manual And Installation

Instructions for Atmos heric Venting

BIASI SG

Page 2 Biasi SG Series

Biasi SG Series Page 3

Dear Customer:

Thank you for buying a BIASI SG boiler.

The BIASI SG is a cast iron, oil or gas fired hot water boiler, using the famous 3- ass design.

The boiler is light, com act, sim le, rugged and engineered for maximum home heating

efficiency.

We realize that it is not ossible to answer all questions about the SG-series boiler in this

manual. Reading this installation manual does not make the reader an ex ert in all as ects of

installation and o eration, and does not re lace the need for a qualified, licensed heating

contractor. We urge you to contact your installing contractor or distributor if you are in question

about any as ect of your boiler's erformance. Our main concern is that you are satisfied with

your boiler and its erformance. We require that your contractor com lete efficiency tests

using instruments.

The controls and accessories listed in this manual are intended to serve as guidelines rather than

s ecific recommendations. We realize that other makes and models of such devices are available

and can be used as successfully as those we s ecify. The installing contractor is the best judge of

a system's s ecific requirements, as well as the local availability of certain makes and models of

controls and accessories. The receding does not a ly, however, to the equi ment that comes

with every boiler, such as the overheat control (L7248) and ressure relief valve. The

installation of the s ecific devices su lied with every boiler is absolutely necessary to the

safe o eration of the boiler and rotection of the heating system.

All SG-series boilers are built in accordance with the ASME boiler and ressure vessel code, and

bear the "H" stam . The BIASI SG boiler has been tested to UL standard 726.

This BIASI SG boiler has a limited lifetime warranty (refer to back of manual), a co y of which

is rovided with the boiler. Please be sure to return the warranty registration card as the

warranty will be void without your boiler's serial numbers (located on the late on the leg of the

boiler), date of installation and the name of your installer being on record in our files.

Thank you for urchasing our BIASI SG series boiler. If you have questions or comments,

lease don't hesitate to contact us immediately. Our goal is 100% customer satisfaction.

QHT inc.

Page 4 Biasi SG Series

This installation manual is for the basic installation of a SG series boiler for atmos heric venting

for oil and gas. If you are installing a direct vent system or lease refer to its addendum in

conjunction with this manual to insure the ro er installation of the boiler.

BIASI SG-Series Section Page

Im ortant Information &Warnings 5-6

General Information 1 7

Boiler Block Assembly &Ex losion Diagram 2 8

Boiler Location 3 9

Installation of Boiler Trim Kit Com onents 4 10-12

Pi ing the Boiler 5 13

Intake Venting 6 14-15

Exhaust Venting 7 16

Common Exhaust Venting 7.1 16-17

Block Flue Switch 7.2 17

Gas Venting 7.3 18

Burner Setu 8 18

Oil 8.1 19

Gas 8.2 20

Gas Line Pi ing 9 21

Boiler Jacket Assembly 10 22

Control Panel 11 23

Wiring 12 24

Oil Diagrams 12.1 25-27

Gas Diagram 12.2 28

SG Efficiency Control 13 30-33

Commissioning the Boiler 14 34

Maintenance 15 34

Installer Notes 16 35

Homeowner Information 17 36

Warranty Back Cover

Table of Contents

Biasi SG Series Page 5

IMPORTANT INFORMATION

Please read this age carefully.

•

••

•

ALL BOILERS MUST BE INSTALLED IN ACCORDANCE WITH NATIONAL, STATE AND

LOCAL PLUMBING, HEATING AND ELECTRICAL CODES AND ORDINANCES, AS WELL AS

THE REGULATIONS OF THE SERVING ELECTRICAL, WATER AND GAS UTILITIES.

•

••

•

All systems should be designed by com etent contractors, and only ersons

knowledgeable in the layout and installation of heating systems should attem t the

installation of any boiler. It is the res onsibility of the installing contractor to see

that all controls are correctly installed and o erating ro erly when the installation

is com leted.

•

••

•

Do not burn volatile garbage, gasoline, na htha or other flammable liquids other

than No. 2 fuel oil. All flammable liquids (es ecially gasoline), chemicals, rags, a er,

wood scra s, debris, etc., should be ke t away from the boiler at all times. Kee the

boiler area clean and free of all fire hazards.

•

••

•

Please read the literature and warranties su lied by the manufacturers of the

various accessory equi ment. This equi ment is warranted by the res ective

manufacturers, not by Quincy Hydronic Technologies, Inc. Each iece of equi ment

must be installed and used according to the recommendations of the manufacturer.

Codes and Regulations:

Installation of the boiler, burner, oil tank and related equi ment must conform to

national, state and local regulating agencies and codes a licable to the installation of the

equi ment. In the absence of local requirements, the following codes a ly:

The above codes are available from:

National Fire Protection Association (NFPA)

Battery March Park

Quincy, Massachusetts, 02269

htt ://www.nf a.org

American Gas Association (AGA)

Pleasant Valley Road

Cleveland, OH 44134

htt ://www.aga.org

A. ANSI/NFPA - #31 Installation of Oil Burning Equi ment

B. ANSI/NFPA - #70 National Electric Code

C. ANSI/NFPA - #211 Chimneys and Vents

D. ANSI/NFPA - #Z223.1 National Fuel Gas Code

E. ANSI/NFPA - Domestic Gas Conversion Burner

F. CAN/CGA - B149 Installation Codes

G. ANSI/ASME - CSD-1

Page 6 Biasi SG Series

Any a liance that burns natural gas, ro ane gas, fuel oil, wood or coal is ca able of

roducing carbon monoxide (CO). Carbon Monoxide (CO) is a gas which is odorless,

colorless and tasteless but is very toxic. CO is lighter than air and thus may travel throughout

the building.

BRIEF EXPOSURE TO HIGH CONCENTRATIONS OF CO, OR

PROLONGED EXPOSURE TO LESSER AMOUNTS OF CO MAY RESULT

IN CARBON MONOXIDE POISONING. EXPOSURE CAN BE FATAL AND

EXPOSURE TO HIGH CONCENTRATIONS MAY RESULT IN THE

SUDDEN ONSET OF SYMPTOMS INCLUDING UNCONSCIOUSNESS.

Sym toms of CO oisoning include the following:

dizziness vision roblems shortness of breath

headache loss of muscle control unclear thinking

nausea weakness unconsciousness

The sym toms of CO oisoning are often confused with those of influenza, and the highest

incidence of oisoning occurs at the onset of cold weather or during flu season. A victim

may not ex erience any sym toms, only one sym tom, or a few sym toms. Sus ect the

resence of carbon monoxide if sym toms tend to disa ear when you leave your home.

The following signs may indicate the resence of carbon monoxide:

If any of the sym toms of CO occur, or if any of the signs of carbon monoxide are resent,

VACATE THE PREMISES IMMEDIATELY AND CONTACT A QUALIFIED

HEATING SERVICE COMPANY OR THE GAS COMPANY OR THE FIRE

DEPARTMENT.

ONLY QUALIFIED, LICENSED SERVICE CONTRACTORS SHOULD PERFORM

WORK ON YOUR BIASI SG BOILER.

WARNING

∗ Hot gasses from a liance, venting

system i es or chimney, esca ing into

the living s ace.

∗ Flames coming out around the a liance.

∗ Yellow colored flames in the a liance.

∗ Stale or smelly air.

∗ The resence of soot or carbon in or

around the a liance.

∗ Very high unex lained humidity inside

the building.

Biasi SG Series Page 7

The BIASI SG-series boilers are wet base design, sectional, cast-iron boilers for

forced hot water heating systems. The boilers are shi ed re-assembled from the factory in

lengths from two to seven sections. They are designed for firing with oil or gas ower burn-

ers, which are acked se arately along with the jacket and controls for shi ing ur oses.

When the boiler is received, check the contents to ensure that there is no shortage or

damage to any art of the boiler system. With every boiler you should receive a boiler block,

jacket, trim kit and a burner (oil or gas).

Trim Kit Com onents-

USE ONLY THE ETL LISTED BOILER SYSTEM COMPONENTS AND

UL/AGA LISTED GAS BURNER COMPONENTS SUPPLIED WITH THE

BIASI SG BOILER.

1. General Information

Boiler

M odel

Heating

Ca acity Net Out ut Efficiency

Water

Content Length (L) Weight

MBH GPH MBH NET M BH % GALS. IN. LBS

SG-2 79 0.65 91.0 69 85.1 6.9 16.7 264

SG-3 123 1.00 140.0 107 86.1 7.7 21.8 341

SG-4 160 1.30 182.0 139 86.5 9.6 26.9 418

SG-5 201 1.60 224.0 175 87.7 11.3 32.1 506

SG-6 232 1.90 266.0 202 85.3 13.1 37.2 605

SG-7 279 2.25 315.0 243 86.8 14.9 42.3 704

Maximum Water Working Pressure 50 si M aximum Relief Valve is 50 si at 500 M BH

Gross In ut Burner

Ca acity

1 - Honeywell L7248 aquastat

1 - Immersion wells

1 - ¾” X 3” Ni le

1 - Control anel with tem erature

and ressure gauges

1– Double acting barometric dam er

(gas systems only)

1 - 30 PSI ressure relief valve

1 -¾” Boiler drain

1 - ¾” 90° Elbow

1 - Hinge Assembly

1 - 12”x12” Cera-fiber Blanket

1 - Burner mounting hardware

Page 8 Biasi SG Series

All SG series boilers are shi ed from the factory in assembled boiler blocks. If the

block needs to be s lit into sections for ease of delivery, lease read the following:

To assemble s lit blocks, move sections into arallel and facing each other. Sections

may be slid along boards laced underneath the sections. Ins ect ni le orts for damage or

burrs. Remove any burrs by scra ing the ort very lightly. Wi e the ush ni les and ni le

orts with a clean cloth. A ly a film of ni le com ound to both the ni le and ort. Install

the ni le in the ort and then seal by hitting with a hammer cushioned with a block of wood.

A ly section sealant to one section only and slide sections together. Install the four draw

rods and draw the sections together evenly (measure with yardstick). Draw the sections

together until sections make iron-to-iron contact at a oint around the to and bottom orts of

each section.

DO NOT OVER TIGHTEN DRAW RODS

After assembly of boiler block, seal all joints with boiler gasket and remove boards. NOTE:

When cutting off excess length of draw rods, allow enough length to install boiler jacket on

the draw rods.

2. Boiler Block Assembly

Boiler Com onents & Parts BIASI SG-Series

1) Door Alignment Pin

2) Hinge Stud, Nut and Washer

3) U er Hinge Element

4) SG Front Block Section

5) SG Rear Block Section

6) SG Intermediate Block Section

7) Lower Front Bushing

8) Front Ta ing Gasket

9) U er Front Bushing

10) Lower Rear Bushing

11) Draw Rod

12) SG Door

13) Door Stud, Nut and Washer

14) Lower Hinge Element

15) Door Ro e Gasket

16) SG Door Refractory

17) Exhaust Breeching

18) SG Ni le

19) Door Sight Plug

Biasi SG Series Page 9

If the boiler is to be installed in "direct vent" configuration, lease refer

to the QHT Direct Vent Addendum su lied with the Direct Vent Kit.

PROVISIONS FOR COMBUSTION AIR AND VENTILATION AIR MUST BE IN

ACCORDANCE WITH SECTION 5.3, AIR FOR COMBUSTION AND VENTILATION,

OF THE NATIONAL FUEL GAS CODE, ANSIZ223.1, OR APPLICABLE PROVISIONS

OF THE LOCAL BUILDING CODES. DO NOT INSTALL THE BOILER UNTIL

PROPER COMBUSTION AIR HAS BEEN ARRANGED.

3. Boiler Location

The following are the minimum clearance to construction or combustible materials:

1. 9” from the to , sides, and rear of the boiler.

2. 18” from the flue i e in any direction.

3. 24” inches from the front of the boiler.

DANGER

The boiler must be located on a non-combustible floor. A smooth, level concrete

floor is recommended. Locate the boiler as close as ossible to the chimney. If boiler is

installed on combustible flooring, consult local authorities for ro er method of covering

floor. The boiler must not be installed on car eting.

Caution: Do not store or use flammable materials, chemicals or flammable

liquids, es ecially gasoline, in the vicinity of this heating a liance.

WARNING

Boiler is certified as an indoor a liance. Do not install boiler outdoors or locate where it will

be ex osed to freezing tem eratures

Page 10 Biasi SG Series

USE ONLY THE ETL LISTED BOILER SYSTEM COMPONENTS AND

UL/AGA LISTED GAS BURNER COMPONENTS SUPPLIED WITH

THE BIASI SG BOILER.

Please refer to figures below for Barometric Dam er location (gas burners only) and to

the right for the ro er location of the trim com onents.

Barometric Dam er w/

Manual Reset S ill Switch

BIASI SG

T-handle

Gas Cock

Alternative

Location

Dri Leg

Gas Train Positive Pressure

Gas Fired

4.1 Installation of Boiler Trim Com onents

Union

Trim Kit Com onents:

1 - Honeywell L7248 aquastat

1 - Immersion wells

1 - ¾” X 3” Ni le

1 - 30 PSI ressure relief valve

1 - ¾” Boiler drain

1 - 12”x12” Cera-fiber blanket

1 - Burner mounting hardware

1 - ¾” 90° Elbow

1 - Control anel with tem erature

and ressure gauges

1 - Double Acting Barometric

Dam er with Manual Reset S ill

Switch (Gas systems only)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Biasi Chaudière

Biasi

Biasi RIVA ADVANCE HE M110B.24SM/C Manuel utilisateur

Biasi

Biasi RIVA COMBI Manuel utilisateur

Biasi

Biasi RIVA COMPACT HE M96.24SM/C Manuel utilisateur

Biasi

Biasi Parva HE M96.24SM/P Manuel utilisateur

Biasi

Biasi Activ A 25S Manuel utilisateur

Biasi

Biasi RIVA PLUS M90D.24S Instructions d'utilisation et d'entretien

Biasi

Biasi Activ A 30C Manuel utilisateur

Biasi

Biasi RIVA COMBI Instructions d'installation

Biasi

Biasi RINNOVA Series Manuel utilisateur

Biasi

Biasi RIVA COMPACT HE MK2 M96A.24SR/C Manuel utilisateur

Biasi

Biasi KAPPA 27R Manuel

Biasi

Biasi M90E.24S Instructions de construction

Biasi

Biasi ADVANCE 25C Manuel utilisateur

Biasi

Biasi ADVANCE 30C Manuel utilisateur

Biasi

Biasi RCM 105 Manuel utilisateur

Biasi

Biasi ADVANCE OV Series Manuel utilisateur

Biasi

Biasi RIVA COMPACT HE M96.24SM/C Manuel utilisateur

Biasi

Biasi Riva Plus HE M296.24SM Manuel utilisateur

Biasi

Biasi Advance Plus 25C ERP Manuel utilisateur

Biasi

Biasi RIVA PLUS M90S.24S Manuel utilisateur

Biasi

Biasi Inovia 25C ERP Manuel utilisateur

Biasi

Biasi Riva Advance Combi Instructions d'installation

Biasi

Biasi M110B.24SM/E Manuel utilisateur

Biasi

Biasi 28S Manuel utilisateur

Manuels Chaudière populaires d'autres marques

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Manuel utilisateur

Radijator

Radijator BIO max 23.1 Manuel utilisateur

Brunner

Brunner BSV 20 Manuel utilisateur

Buderus

Buderus Logamax GB062-24 KDE H V2 Manuel utilisateur

Potterton

Potterton 50e Fiche technique

UTICA BOILERS

UTICA BOILERS TriFire Manuel utilisateur

Joannes

Joannes LADY Series Manuel

ECR International

ECR International UB90-125 Manuel d'instructions

Froling

Froling FHG Turbo 3000 Manuel utilisateur

Froling

Froling P4 Pellet 8 - 105 Manuel utilisateur

U.S. Boiler Company

U.S. Boiler Company K2 Manuel utilisateur

Henrad

Henrad C95 FF Manuel utilisateur

NeOvo

NeOvo EcoNox EF 36 Manuel utilisateur

Potterton

Potterton PROMAX SL 12 Manuel utilisateur

Eco Hometec

Eco Hometec EC 25 COMPACT Manuel utilisateur

Viessmann

Viessmann VITODENS 200 Mode d’emploi

Baxi

Baxi Prime 1.24 Manuel utilisateur

REXNOVA

REXNOVA ISA 20 BITHERMAL Manuel utilisateur