BGS technic 8464 Manuel utilisateur

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 8464

Silentblocks Tool Kit | for Fiat

ATTENTION

Read the operating instructions and all safety instructions contained therein carefully before using the

product. Use the product correctly, with care and only according to the intended purpose. Non-

compliance of the safety instructions may lead to damage, personal injury and to termination of the

warranty. Keep these instructions in a safe and dry location for future reference. Enclose the

operating instructions when handing over the product to third parties.

INTENDED USE

This tool is used for mounting of rear axle silent blocks on Fiat Stilo (2001-), Fiat Bravo (2007-) and

Lancia Delta (2008-).

SAFETY INFORMATIONS

•Read carefully the instructions before working with this tool set.

•Do not use this tool set for other purpose for which it is designed.

•Lifting of vehicles only allowed on the special lifting points.

•Before starting work under a car always ensure that it is adequately supported by axle stands

or ramps. Chock wheels and ensure that the hand brake is firmly applied.

•Always use approved eye protection, especially when working under vehicles.

•Ensure a secure and well-gripped stance during fitting.

•Ensure that tools are correctly mounted.

•Regularly check the condition of the tool and replace the damaged parts.

•Do not over tighten or use undue force as this can cause damage to both tool and component.

•The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to

the spindle bearing or other components bursting and fragments of components flying around

may lead to injuries.

•Always use workshop manual for detailed instructions.

•Always lubricate the screw threads before using the tool.

•Check & replace any damaged components as required.

•Keep children and unauthorized persons out of the working area.

•Keep this tool out of children reach.

COMPONENTS

1 Spindle

2 Spindle nut with bearing

3 Thrust plate with bores

4 Pins

5 Thrust plate

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

SILENTBLOCKS

This tool set is suitable for following

bushes with e.g. original part numbers:

50700796, 50702649, 50706312,

50706505, 51795336, 51812443,

51840600

USE

1Spindle

2Spindle nut with bearing

3Thrust plate with installed pins (4)

4Thrust plate

ARear axle

BBush

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories

and packaging should be sorted, taken to a recycling centre and disposed of in a manner

which is compatible with the environment. Contact your local solid waste authority for

recycling information. Dispose of this product at the end of its working life environmentally.

Table des matières

Autres manuels BGS technic Outils

BGS technic

BGS technic 566 Manuel utilisateur

BGS technic

BGS technic 3213 Manuel utilisateur

BGS technic

BGS technic 8310 Manuel utilisateur

BGS technic

BGS technic 9603 Instructions originales

BGS technic

BGS technic 8770 Manuel utilisateur

BGS technic

BGS technic 7711 Manuel utilisateur

BGS technic

BGS technic 3327 Manuel utilisateur

BGS technic

BGS technic 6036 Manuel utilisateur

BGS technic

BGS technic 70008 Manuel utilisateur

BGS technic

BGS technic 9754 Manuel utilisateur

BGS technic

BGS technic 62637 Manuel utilisateur

BGS technic

BGS technic 3060 Manuel utilisateur

BGS technic

BGS technic 9637 Manuel utilisateur

BGS technic

BGS technic 70221 Manuel utilisateur

BGS technic

BGS technic 8918 Manuel utilisateur

BGS technic

BGS technic BGS 9071 Manuel utilisateur

BGS technic

BGS technic BGS 18087 Manuel utilisateur

BGS technic

BGS technic 72098 Manuel utilisateur

BGS technic

BGS technic EWS1017 Manuel utilisateur

BGS technic

BGS technic 5269 Manuel utilisateur

BGS technic

BGS technic 1230-1 Manuel utilisateur

BGS technic

BGS technic 67307 Manuel utilisateur

BGS technic

BGS technic 9555 Manuel utilisateur

BGS technic

BGS technic 1744 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser

Goobay

Goobay 97790 Manuel utilisateur