BGS technic 7750 Manuel utilisateur

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0

F56essartSresukreveL ax +49 (0) 2191 / 46438-40

ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D

Instruction Manual

BGS technic KG

Bandwirkerstr. 3

42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

[email protected]

www.bgstechnic.com

Art. 7750

Bearing and Gear Puller

Mechanical puller for removing bearings, gears and bushes from shafts.

Suitable for engineering, automotive, marine and agricultural applications.

Included

2 / 2 circular puller halves made of forged steel

with the dimensions:

1 1/4 "- 2 1/4 " (30 mm - 50 mm)

2 / 2 circular puller halves made of forged steel

with the dimensions:

2 1/4" - 3 1/2" (30 mm - 75 mm)

Bolt: 9,5 mm x L 125 x 3 / 8 "x 24UNF Bolt: 12,7 mm x L 135 mm x 1 / 2 "x 20UNF

Extention: 3/8" x 16UNC Extention: 3/8" x 15UNC

The product consists of a chromium-vanadium alloy and meets the highest quality standards.

Notes:

The manufacturer is not liable for damage to the shells of A, caused by the operation of the pressure

screw E, with a hammer instead of a wrench.

The L-shaped brackets Fmay be only used in pairing. The use of brackets as crowbar is strongly

discouraged.

Do not use the puller for pulling bearings and / or gear with too small outer diameters. All damage by

improper use of the tool, falling out of the guarantee facility of the manufacturer.

When assembled

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0

F56essartSresukreveL ax +49 (0) 2191 / 46438-40

ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D

Instruction Manual

BGS technic KG

Bandwirkerstr. 3

42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

[email protected]

www.bgstechnic.com

OPERATION

Using at gears and bearings

Take the two semi-

circular

Shells A

Set this to the object that

be pulled.

Connect the shells with

screws B.

Remove security ring of

the bearing / gear, the

semi-circular shells A

grips around the bearing

or gear.

Now attach the two

screws Cto the shell unit

Insert the bracket D, on

the screws Cand secure

with the help of the

accompanying nuts.

Turn the screw Ethrough

the central thread of the

bracket Dto the object to

be extracted.

Turn the pressure screw

Eclockwise until the

bearing or gear is

removed.

Using at pulley

During removal of a

pulley, first insert the

puller jaws Fto the

pulley.

Attach the puller jaws F

to the mounting

brackets Dand secure

the puller jaws with the

associated nuts.

Turn the pressure screw Einto the central

threaded of the bracket Duntil the pressure screw

touch the pulley. By tightening of the screw E, you

can pull out the pulley.

Autres manuels BGS technic Outils électriques

BGS technic

BGS technic 3239 Manuel utilisateur

BGS technic

BGS technic 8299 Manuel utilisateur

BGS technic

BGS technic 74253 Manuel utilisateur

BGS technic

BGS technic 69505 Manuel utilisateur

BGS technic

BGS technic 8954 Manuel utilisateur

BGS technic

BGS technic 965 966 Manuel utilisateur

BGS technic

BGS technic 9423 Manuel utilisateur

BGS technic

BGS technic 9919 Manuel utilisateur

BGS technic

BGS technic 8261 Manuel utilisateur

BGS technic

BGS technic 900 Manuel utilisateur

BGS technic

BGS technic 8219 Manuel utilisateur

BGS technic

BGS technic 8874 Manuel utilisateur

BGS technic

BGS technic 8216 Manuel utilisateur

BGS technic

BGS technic 8219 Manuel utilisateur

BGS technic

BGS technic 55412 Manuel utilisateur

BGS technic

BGS technic 3282 Manuel utilisateur

BGS technic

BGS technic 68340 Manuel utilisateur

BGS technic

BGS technic 8421 Manuel utilisateur

BGS technic

BGS technic 3242 Manuel utilisateur

BGS technic

BGS technic 74354 Manuel utilisateur

BGS technic

BGS technic 8721 Manuel utilisateur

BGS technic

BGS technic 1927 Manuel utilisateur

BGS technic

BGS technic 9367 Manuel utilisateur

BGS technic

BGS technic BGS 70208 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel