Bewator K12 Mode d’emploi

1 2 3

K12

Installation & User Manual

Material from this manual may only be copied with the consent in writ-

ing of Bewator. Bewator reserves the right to alter both the content of

the manual and the design of the product.

Document number: 81091-2

Bewator AB is part of the Swedish Bewator Group AB, which develops

and markets a complete security product range that includes access

control and alarm. Sales, installation and servicing are handled by a

national dealer network.

Actions (such as unauthorised manipulation, copying etc.), must not be

taken with the software contained in the products and systems. Such

actions are regarded as copyright violation and may result in imprison-

ment or ﬁnes and may likewise lead to an obligation to pay damages

and compensation for using the software.

K12 Installation & User Manual 3

Content

What is K12 ? ................................................. 4

Deactivate an alarm and unlock a door using one code.....4

Alarm Control.................................................................. 5

Alarm activation with button or timer...............................6

Red LED Control ..............................................................6

Disable the codes whenever needed ................................ 7

Duress or alert ................................................................8

Keypad .......................................................... 9

Wiring.......................................................... 10

Programming............................................... 12

Buzzer and LEDs............................................................ 12

Choose password ......................................................... 13

Change password ......................................................... 13

Select Alarm by-pass relay mode .................................. 14

Program codes.............................................................. 15

Erase codes .................................................................. 16

Change codes ................................................................17

Set opening time........................................................... 18

Set door held warning time ........................................... 19

Door control on/off .......................................................20

Alert output on/off ........................................................ 21

Duress output on/off.....................................................22

Background lighting on/off ........................................... 23

Erase the memory .........................................................24

Using K12 .................................................... 25

Entrance ....................................................................... 25

Activating an intruder alarm .......................................... 25

Deactivating an intruder alarm ...................................... 25

Enter duress code..........................................................26

Technical data..............................................27

Programming overview................................. 28

4 K12 Installation & User Manual

What is K12 ?

K12 is a compact, multifunctional alarm by-pass

unit with two relay outputs. This makes K12

capable of controlling both an intruder alarm

and a door. In both cases either a four- or a

six-digit code can be used. All programming is

done from the keypad.

Deactivate an alarm and unlock a door us-

ing one code

The advantage of using two relay outputs is

that two functions can be activated at the

same time, using only one code. For example,

the code can deactivate an intruder alarm and

open the lock at the same time.

For every code you can decide:

Control an alarm by-pass relay and a door

relay.

Control only a door relay.

Control only an alarm by-pass relay.

Different codes for alarm and door

If unique codes are used for alarm control only

they are programmed for this and cannot un-

lock the door. Separate codes have to be used

for that.

•

K12 Installation & User Manual 5

Alarm Control

K12 can be used for either monostable alarm

by-pass – or bistable intruder alarm control.

What method used is programmable. Factory

setting is monostable function.

Monostable

Monostable function will (beside opening relay)

also activate the alarm by-pass relay when a

code or exit button is used. Maximum time is

opening time + door held warning time. If the

door is closed during this time both relays are

deactivated. Note that this requires that door

monitor contact be connected. See also section

Door Control.

Bistable

Using bistable function allows activating an in-

truder alarm with Code + B. Any codes for only

door opening as well as remote opening will be

disabled. Note that the alarm relay will change

immediately.

Deactivation of the alarm is done with Code +

A. If the code also should activate the opening

relay a delay of one second is used. It is also

possible to use door monitoring together with

bistable alarm control. See Door Control.

6 K12 Installation & User Manual

Alarm activation with button or timer

K12 allows that a bistable alarm can be acti-

vated using a button or an external timer con-

nected to an input in the K12.

Red LED Control

To indicate that the alarm is on, the red LED

on the front can be lit. This is controlled by an

external signal connected to the K12.

K12 Installation & User Manual 7

Disable the codes whenever needed

K12 offers the possibility to disable codes at

certain times. For example, the cleaning staff’s

access to the building can be limited to certain

hours, while tenants/staff can have access to

the door 24 hours a day.

By connecting two time clocks to K12, three

different time zones can be used to control the

codes: one controlled by time clock 1, one con-

trolled by time clock 2 and one that is valid 24

hours a day, i.e. no time control.

8 K12 Installation & User Manual

Duress or alert

K12 is equipped with an output that can be

activated for one of the following reasons:

A user enters a duress code (see the Duress

output on/off section)

The door held warning time expires or the

door is forced open (see the Alert output

on/off section)

Choose which alternative to use. Then connect

e.g. a burglar alarm or similar to the output.

•

K12 Installation & User Manual 9

Keypad

1 2 3

Red LED

For optional use, e g to

indicate Alarm on.

Used when deactivating an

intruder alarm and for

programming of the K12.

E g A21 to programme

codes.

Yellow LED

Indicates key presses.

Green LED

Lit when lock is open

Press B and enter the

6-digit password to

programme the K12.

B is also used when

activating an intruder

alarm.

10 K12 Installation & User Manual

Wiring

The numbers refer to the diagram on the right.

1Power in, terminal nos 1(+) and 2. 12-24 V.

2Input for extra LED (red), terminal nos 3 and 4.

10-35 V DC.

3Tamper switch, terminal nos 5 and 6. Closed

when the housing is closed.

4Code disabling from external time clock.

Input 1: Close terminal nos 8 and 7.

Input 2: Close terminal nos 9 and 7.

5Output for alert or duress. Use E7 relay. Connect

between terminal nos 10 and 1(+).

6Input for door contact. The contact is closed

when the door is closed. Terminal 19 and 21.

7Exit button. The door opens on closing terminal

nos 20 and 21.

8Electric locking device. Dashed line refers to

locks with fail-safe function.

9SW1 push button. Used when choosing pass-

word and erasing memory.

10 Alarm By-pass relay. Monostable or Bistable

mode (shown in OFF position)..

11 Alarm button: Close terminal nos 13 and 15 (The

alarm by-pass relay will change directly).

Autres manuels pour K12

Table des matières

Autres manuels Bewator Clavier

Bewator

Bewator M43 Manuel d'installation et d'exploitation

Bewator

Bewator K12 Manuel utilisateur

Bewator

Bewator K42 Manuel utilisateur

Manuels Clavier populaires d'autres marques

BFT

BFT SELETTO Manuel utilisateur

Micro Id

Micro Id MP7G3BL Manuel d'instructions

WindowMaster

WindowMaster WLI 130 Manuel utilisateur

ACT

ACT ACT PRO 1030 Manuel utilisateur

Cardin

Cardin SSB Series Manuel utilisateur

Harman Kardon

Harman Kardon KP 1 Manuel utilisateur

Chamberlain

Chamberlain KPR2000 Guide de l'utilisateur

CYP

CYP CR-KP1 Manuel utilisateur

Aeware

Aeware k-35 Series Guide de référence

Aritech

Aritech CS-175 Series Manuel utilisateur

GE NetworX NX-1600E Series Manuel utilisateur

Lenze AC Tech

Lenze AC Tech MC SERIES Manuel utilisateur

Burg Wächter

Burg Wächter secuENTRY 7711 Manuel utilisateur

Aeware

Aeware in.k450 Manuel utilisateur

Lenze

Lenze EPM-H410 Manuel utilisateur

Toshiba

Toshiba RKP007Z Manuel utilisateur

Gemini

Gemini GEM-DXK1 KEYPAD Manuel utilisateur

Russound

Russound MDK-C5 Manuel d'utilisation