Betso TCX-2 Manuel utilisateur

User manual

BETSO TCX-2

Ultra compact highly accurate Time Code transceiver

1© Copyright BETSO ELECTRONICS s.r.o.

User manual

BETSO TCX-2

Contents

1. Product description................................................................................................4

2. Top features..........................................................................................................4

3. Control elements....................................................................................................5

4. Insertion of battery / accumulator...........................................................................6

5. Turning N/ FF..................................................................................................6

6. Menu control......................................................................................................... 6

7. Setting of TCX-2................................................................................................... 7

.1 Time code.......................................................................................................

.1.1 Frame rate * - setting frame rate of generated Time Code...............................

.1.2 Amplitude - setting amplitude of generated Time Code...................................8

.1.3 Default * - setting of default Time Code start time/frame................................8

.1.4 Offset - setting of Time Code offset for jamming or RF transmission.................8

.1.5 User bits - setting of User Bits of generated Time Code...................................9

.1.6 Auto on - setting of automatic power on when TC source is connected.............9

.1. Jamming * - setting of jamming to external TC source...................................10

.1.8 Cross jamming * - jamming TCX-2 with different TC frame rate.....................10

.1.9 Jamming calibration - calibration to TC source during jamming......................11

.2 Wireless......................................................................................................... 11

.2.1 Unit type - setting of wireless behaviour of TCX-2..........................................11

.2.2 Channel - setting of RF time code system channel..........................................12

.2.3 Location - setting of usage location for regulatory compliance.........................12

.3 Special...........................................................................................................13

.3.1 Copy TX TC-IN to RX TC-OUT..................................................................13

.3.2 Battery type – setting type of battery powering TCX-2...................................14

.3.3 OLED brightness – setting of OLED display brightness...................................14

.3.4 OLED power save mode – setting of OLED power save function.....................14

.3.5 Display orientation – setting of OLED display orientation................................15

.4 System.......................................................................................................... 15

.4.1 Serial number - serial number of TCX-2.........................................................15

.4.2 Upgrade to TCX-2+ - allows TCX-2 FW upgrade...........................................15

.4.3 HW version - version of hardware of TCX-2...................................................16

.4.4 SW version - version of software of TCX-2....................................................16

.4.5 GPS calibration – calibration of internal TCXO using GPS module...................16

.4.6 Contains FCC ID: 2AJWB-RFM1 - inbuilt transmitter module.........................16

.4. Contains IC: 21968-RFM1 - inbuilt transmitter module...................................1

8. Control of TCX-2.................................................................................................17

8.1 Unit type of TCX-2 is set to RF OFF *............................................................1

8.2 Unit type of TCX-2 is set to TX......................................................................18

8.3 Unit type of TCX-2 is set to RX......................................................................18

9. Informative LED function......................................................................................18

10. Recommended accessories...................................................................................20

11. Troubleshooting.................................................................................................20

12. Technical specification........................................................................................21

User manual

BETSO TCX-2

13. BNC connector wiring.........................................................................................22

14. FCC regulatory information (USA) FCC Statements.............................................22

15. Industry Canada (IC) regulatory information.........................................................23

16. Avis de conformité à la réglementation d’Industrie

Canada...................................................................................................................24

17. EC Declaration of conformity..............................................................................25

Used symbols

Indicates text that has only informative character. If you overlook this

information, it can't result in product damage by it's mishandling.

Indicates text that has important instruction character. If you overlook this

information, it may result in product damage.

3© Copyright BETSO ELECTRONICS s.r.o.

User manual

BETSO TCX-2

Thank you for purchasing BETSO product!

Please pay sufficient attention to the following user manual of your new product

BETSO. Following these instructions, you will avoid the possible damages of your new

device and at the same time, they will be presented to you all the available features that

allow you to take advantage of the potential of the product.

For the latest information about our products BETSO please contact your local

distributor or visit our website http://www.betso.eu.

1. Product description

The BETSO TCX-2 is ultra compact highly accurate time code transceiver. It is

based on our very easy to use "plug and play" philosophy, which is guaranteed by wide

OLED display and easily replaceable single AA battery.

Wireless time code transmission from unit set as TX provides distribution of time

code with 0 frame drift (over infinite period of time) to all units set as RX. RX units

jammend to TX perform as generators at same time as receivers, which means, that even

if RX looses wireless signal from TX, it will keep generating correct time code. Our new

digital RF link protocol furthermore offers great feature of wireless device state

monitoring. So each unit connected to the network has perfect overview off all other

connected units.

Small dimensions, long battery life, intuitive menu based operation of TCX-2 and

above described new wireless capabilities make TCX-2 ideal for ENG/EFP or studio

usage.

2. Top features

•works with all frame rates (23.9 6 fps - 30 fps) drop frame and non drop frame

SMPTE TC formats includes its 0.5 and 2 multiples (12.5 fps, 15 fps, 50 fps, etc.)

•wireless digital RF link protocol for time code distribution and units state monitoring

•precise mechanic construction from anodized aluminium alloy

•BNC connector for timecode input/output

•optional displaying of time code / user bits

•3 levels of display brightness

•intuitive control with quick, menu based setting of all advanced functions

•low consumption allowing operating time up to 80 hours (lithium cell, OLED PS mode, RF OFF)

User manual

BETSO TCX-2

•advanced monitoring of batteries level with signalization of discharged batteries

•power saving function which allows to dim or turn off OLED display when no user

activity is detected

•Automatic ON & JAM function, which allows to turn on and JAM simultaneously

without need to turn TCX-2 on first

•Variable powering using 1x AA batteries/accu

•USB connector for easy firmware upgrade

. Control elements

5© Copyright BETSO ELECTRONICS s.r.o.

1. Antenna

2. MicroUSB connector

. OLED display

4. Informative LED

5. Button „UP“

6. Button „SET“

7. Button „DOWN“

8. BNC connector for TC input/output

9. Battery door

10. Battery compartment

11. BETSO Hot Shoe holder

mounting holes

User manual

BETSO TCX-2

4. Insertion of battery / accumulator

To power TCX-2 insert one AA alkaline/lithium cell or accumulator. After checking right

polarity of inserted battery according to back side label, close the door.

TCX-2 is protected against destruction by inserting battery with wrong polarity.

Warning: Never leave battery inside of a product which will be unused for more

than a week! Never leave discharged battery inside to avoid battery leakage!

5. Turning ON/OFF

Turning device ON long press of SET button

Turning device OFF long press of SET button until “Off” widget is

highlighted

After turning ON the TCX-2, there will be displayed BETSO logo and after that,

TCX-2 will start to operate according to previous setting in the menu.

If jamming is enabled, TCX-2 is set as TX and there is an external TC source

connected to TCX-2, it starts to jam immediately.

6. Menu control

Enter the menu long press of SET button until “Menu” widget is

highlighted

Exit the menu long press of SET button in main menu

Enter the submenu short press of SET button

Exit the submenu long press of SET button

Move up short press of UP button

User manual

BETSO TCX-2

Move down short press of DOWN button

Enter the setting short press of SET button

Change setting short press of UP / DOWN button

Confirm the setting short or long press of SET button

After exiting of the menu, all critical changes will be made upon question

confirmation, other changes are set immediately.

Setting will be saved during regular turning off process, unpredicted battery

removal will result in unsaved menu setting. Low battery power off will save

setting correctly.

7. Setting of TCX-2

Menu control is described in previous chapter 6 Menu control.

7.1 Time code

In this section of menu there are located all settings related with time code.

7.1.1 Frame rate * - setting frame rate of generated Time Code

* This feature is available only with TCX-2+ FW upgrade.

Menu / Time code / Frame rate

This function allows to set different frame rate of generated time code. When cross

jamming is enabled, this frame rate will be used after jamming. TCX-2 can generate any

type of time code including 0.5 and 2.0 multiples of standard frame rates.

Standard rate TC: 0, 0DF, 29.97, 29.97DF, 25, 24, 2 .976

2x multiplied rate TC: 60, 60DF, 59.54, 59.54DF, 50, 48, 47.952

0.5x multiplied rate TC: 15, 15DF, 14.985, 14.985DF, 12.5, 12, 11.988

7© Copyright BETSO ELECTRONICS s.r.o.

User manual

BETSO TCX-2

7.1.2 Amplitude - setting amplitude of generated Time Code

Menu / Time code / Amplitude

This function allows to set output amplitude of generated time code on BNC output.

TC amplitude: +6dBu, + dBu, 0dBu, - dBu, -6dBu, -9dBu, -12dBu, -15dBu,

-18dBu, -21dBu, -24dBu, -27dBu, - 0dBu,

This function is very useful when using TCX-2 with small DV camcorders or

photo cameras without TC input when standard amplitude of Time Code could

overload audio input of device.

7.1. Default * - setting of default Time Code start time/frame

* This feature is available only with TCX-2+ FW upgrade.

Menu / Time code / Default

This function allows to set up default beginning time and frame of generated time code

after turning TCX-2 on.

HH:MM:SS:FF HH: hours, MM: minutes, SS: seconds, FF: frame number

Invalid drop frame time code formats are permitted.

7.1.4 Offset - setting of Time Code offset for jamming or RF transmission

Menu / Time code / Offset

This function allows to set offset of generated time code related to jamming source or

TX in RF RX mode.

User manual

BETSO TCX-2

-10.0 fr to +10.0 fr offset setting from -10 frames to +10 frames in step of 0.1

frames

This function is very helpful for compensation of TC offset when using some

types of HD camcorders.

7.1.5 User bits - setting of User Bits of generated Time Code

Menu / Time code / User bits

TCX-2 allows to choose one of the following possible User bits sources, which will be

inserted in the generated time code.

As jammed TC User bits of generated TC are the same as User bits of jamming

source at the time of jamming

Manual UB User bits of generated TC are manually set in format:

U8U7:U6U5:U4U: U2U1

Each User bit can be set in the range of 0 - 9, A - F

7.1.6 Auto on - setting of automatic power on when TC source is connected

Menu / Time code / Auto on

This function allows to turn on TCX-2 when TC source is connected to BNC connector.

When Enable + JAM is set, jamming will start immediately after TCX-2 is turned on and

TC source is still connected to BNC input.

Enable Auto on function is enabled

Enable + JAM *Auto on function is enabled and jamming starts after turning on

Disable Auto on function is disabled

* This feature is available only with TCX-2+ FW upgrade.

User manual

BETSO TCX-2

We recommend to set this option to „Enable“ or „Enable + JAM“. Then you can

easily turn on and JAM TCX-2 to external TC source and avoid necessity to use

standard turning ON/OFF and jamming procedure.

7.1.7 Jamming * - setting of jamming to external TC source

* This feature is available only with TCX-2+ FW upgrade.

Menu / Time code / Jamming

Once / Manual TCX-2 can be jammed once without asking and

then user has to confirm next jamming

Continuous (BNC = TC input) TCX-2 will be jammed without asking every

time new TC source is inserted

Disable Automatic jamming is disabled. Useful for forced

master mode. Jamming is still available upon request

When jamming continuous option is selected, TCX-2 is set as TX and external

TC source is connected, every time measured TC offset exceeds 0.05 frames,

TCX-2 jams to this new time code.

7.1.8 Cross jamming * - jamming TCX-2 with different TC frame rate

* This feature is available only with TCX-2+ FW upgrade.

Menu / Time code / Cross jamming

This function enables TCX-2 to be jammed from external TC source preserving TC frame

rate set in TC frame rate option (chapter .1.1).

Enable Cross jamming is enabled

Disable Cross jamming is disabled

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur