Maintence
Optical components should be cleaned gently，Do not use disruptive
solvent, otherwise it will damage the plastic or coated surface.
1. After the power if off, cooled completely, then open the case.
2. Blowing machine with a vacuum cleaner or pressure blower, gently
blow away dust and floating objects.
3Use odorless paper or cotton cloth soaked with water or distilled water
to wipe particulate, do not rub surfaces, blow any floating object with a
pressurized gas.
4.Dip cotton of the alcohol or unscented tissue paper to remove dust
and residues, glass cleaner may also be used, but residues must be
removed with distilled water, to the circle on each side, wipe from the
Center, and then wiped dry with a soft cotton cloth.
5.Using a soft brush, cotton paper, air cleaners or stress on stomatal
and hair dryers that the dust from the fan out. Excessive dust, smoke
and damage caused by non-normal use, out of the scope of warranty.
Declare
The product is with good performance and complete package when it is
delivered. The end-user of this product should follow all the above
instructions and warnings. Any damage caused by misuse, malfunction
and problem caused by ignoring the instructions are not included in
the repair guarantees of the manufacturer or dealers.
Page 13
Inspection
In order to use the product securely and properly, please read the
manual before using and follow the instructions strictly to prevent
personal safety trouble and product damage caused by misuse.
Take care of the product, check the possibility of the product damage
caused by transportation and check all the listed items are present upon
receipt of the product:
Beam Moving Head 1 Use Manual 1
Power cable 1 Handle: 2
Installation
1. Make sure there is no flammable or explosive subjects within min 1.5
meter nearby the installation.
2.Before installation, please check and make sure the power supply
voltage meet request of the system.
3. Please check ventilation and fans or exhaust passages are cleared.
4. The equipment should be fixed firmly.
5. For security reasons, the appliance must be earthed.
Page 2
