BERNSTEIN 805 Manuel utilisateur
ASSEMBLY INSTRUCTIONS - IV / 2018
IN-WALL SYSTEM 805
for wall-wc with ushplate
2
In-wall system 805
CONTENT OF DELIVERY:
Item Description Indication Quantity
Rubber seal Ø 110 1
Straight ush
pipe 1
Waste seal 1
Eccentric
pipe 1
Rubber seal 1
Full ush air
hose transparent 1
Half ush air
hose blue 1
Absorbing
panel 1
Flush pipe 1
Rubber seal
for the ush
pipe
Ø 60 1
Rawl plug 8 x 40 2
Screw ST4,8 x 45 2
Item Description Indication Quantity
Rawl plug SX10 Ø 6-8 2
Screw ST6,8 x 67 2
Washer Ø 22 x 2,0 2
M12 Bolt 2
Screw cover 2
M12 Nut 2
big Washer Ø 32,5 x 2,5 2
Rubber bolt 2
Screw cover 2
Stainless
steel bolt 2
Washer Ø 11 x 1,2 2
3
ITEMS INCLUDED IN DELIVERY:
Aluminium frame
Lever
Water cistern Lower half frame Drainage pipe
Flush plate Screw set
Glass panel Flush valve Inlet valve
4
In-wall system 805
Product type: Wall-hung toilet installation system
Model: 20981 (black) and 20982 (white)
Required room temperature: 3 – 40° C
Water supply pressure: 0,07 – 0,75 MPa
Water temperature: 4 – 35° C
Protection class: IPX4
Dimension: 1003,5 x 483 x 108 mm
TECHNICAL SPECIFICATIONS:
TECHNICAL DRAWINGS - Water inlet and waste system:
5
INSTALLATION OF THE SANITARY MODULE:
Insert the drainage pipe into the pre-drilled drainage hole
on the wall.
1
Remove the upper cover (1) and the support and
the support tube (2).
Bracket on the
back wall
2a
2b
Place the sanitary module on the wall and fasten
the drainage pipe (1) with the clamp (2).
6
In-wall system 805
3
4
Using the given openings - four on the wall, two on the
oor - mark the drill holes with a pin (3).
Open the clamp and remove the sanitary
module from the wall (4).
7
5
6
Drill the holes using the markers.
The depth of the drill holes must be greater than the length
of the dowels (see the diameter in the drawing (5)).
Insert the rawl plugs into the corresponding holes (6).
Return the sanitary module
to the correct wall position (7).
8
In-wall system 805
7
8
Now x the unit to the wall tightening the screws in
the corresponding rawl plugs (8) and use the bolts to
secure the feet on the oor.
Connect the tube with the support (1)
and the corresponding valve on the
wall (2 + 3).
9
9
Open the shut-off valve on the inlet water pipe (4) to check the function.
10
In-wall system 805
Bracket glass panel
(4 pieces)
10
Attach the glass panel to the aluminum
frame of the sanitary module (1).
Push it down (2) so the glass panel mounts
snap into the frame mounts.
11
Autres manuels pour 805
1
Table des matières
Autres manuels BERNSTEIN Produits de plomberie
BERNSTEIN
BERNSTEIN LTA 1003 Manuel utilisateur
BERNSTEIN
BERNSTEIN LTA 1001 Manuel utilisateur
BERNSTEIN
BERNSTEIN NT6185C Manuel utilisateur
BERNSTEIN
BERNSTEIN LTA 1002 Manuel utilisateur
BERNSTEIN
BERNSTEIN G30014A Manuel utilisateur
BERNSTEIN
BERNSTEIN NT6185C Manuel utilisateur
BERNSTEIN
BERNSTEIN NT7060 Manuel utilisateur
BERNSTEIN
BERNSTEIN NT7060 Manuel utilisateur
BERNSTEIN
BERNSTEIN EX403 Manuel utilisateur
BERNSTEIN
BERNSTEIN TIM 165386 Guide d'installation
