SCOUT200 Series Quick Start Guide 5
1. Select ROUTES to display the Routes window.
The list of available routes is displayed and information about each route:
Total number of points in the selected route
Number of points with completed recordings
Percentage of points with completed recordings
2. Select a database, folder, and route. The Route Configuration window is displayed.
3. Select a Display and Recording Mode
Display
•GAUGE - Displays a color-coded gauge showing the vibration
level compared to the alarm threshold.
•PLOTS - Displays spectra &/or waveform plots allow data-quality
review and analysis.
Recording Mode
•QUICK MODE - Takes all measurements at this location as
quickly as possible, without delays or user intervention.
•AUTO MODE - The S1 Collector App automatically moves on to
subsequent recordings at this measurement location with a
short, user-configured delay.
•MANUAL MODE - The S1 Collector app allows you to visually
analyse the data and/or remeasure before manually
proceeding to the next measurement.
4. Select Sensors to enable the channel(s) you have sensors connected to and select or create the
appropriate sensor for each channel. Press Done to return to the Route Configuration screen.
5. Select START or RESUME .
The Route Details window is displayed.
6. The blue circle indicates the Machine – Bearing – Point where the
sensor should be placed. Then select
MEASURE to start recording.
The type of data displayed, and the progress to the next
measurement, is controlled by the Display and Mode selections
you made earlier. You may be presented with these options:
To view a graph of the recording, select ANALYZE.
To retake the recording, select REMEASURE.
The new recording overwrites the previous one.
7. You can use MORE to access these options:
Skip recording a machine on a route.
Toggle the status of a machine from running to
not running and vice versa
Delete opens a flexible interface to remove unwanted
recordings.
8. Sync the data between the S1 Collector app and System 1.
