BenQ WM03G5 Manuel utilisateur
Installation Manual
●Be sure to read this manual thoroughly and to do the installation work safely.Keep
this manual available for future reference.
●Sufficient expertise is required for installing this projector wall mount.
●Do not use the projector wall mount for purposes other than for which it is designed.
Model: WM03G5
Important Safety
Checking The Installation Position
Checking The Supplied Accessories
Projector(with the projector
mounting plate)(1)
Setting plate (1) Wall plate (1)
Be sure to read this manual thoroughly to do the installation work.
3For safety reasons, check the strength of the wall before installation. If the wall is not strong
enough, reinforce it sufficiently before installation.
4Do not make alterations to the projector wall mount.
Do not hit or hang any heavy objects on the projector wall mount. If the projector wall mount is damaged,
stop use and contact a qualified service person immediately.
9
When dismounting the projector from the projector wall mount, be sure to unplug the AC power cord and
other connecting cables beforehand.
8
Use the supplied accessories only. Use of accessories other than those supplied may result in damage to
the projector wall mount.
7
To avoid fire, do not install the projector with the projector wall mount in a humid or excessively dusty place.
Please install this apparatus only on the horizontal surface instead of the slanting one.
5Do not install the projector wall mount on a wall subject to vibration or impact.
Only qualified service personnel (two or more) should carry out installation or dismounting of the projector
from the projector wall mount.
2
* Manufacturer is not liable for any damages or injury caused by mishandling or improper installation.
Use with products heavier than the maximum weights(Weight Capacity： ＜15kg) indicated may
result in instability causing possible injury.
ＥＮＧＬＩＳＨ
Wall plate cover (1)
L5Allen key
b
diagrammatic
presentation
NO
designation
c
d
a
5
quantity
5
1
L3Allen key
1
Screw(M6X55)
Φ10mm Anchor bolt
Screw(M4X10)
4
e
Screw(M6X15)
4
f
g
Regulating lead screw
1
D
Thickness of the screen.
a
X
M
w
Scale value = D
30mm
Center
Center
Plate height 260mm
With cover 270mm
Ceiling height(H)
=30mm+ Plate height
+V+h+F
F
H
V
Checking The Installation Position
● According to the scale to determine the screen size .Scale parameters are for
reference only.
ＥＮＧＬＩＳＨ
±5°
±5°
±5°
315mm~535mm
450mm
Regulating range
0~75mm
Regulating range
0~30mm
190mm
270mm
Set plate
inch
mm
Wall plate
To Set The Projector Wall Mount On The Wall
● According to the scale to determine the installation height of the wall plate .
Scale parameters are for reference only.
* Please refer the installation chart in projector UM and QSG for proper installation
evaluation.
ＥＮＧＬＩＳＨ
image
73''
78''
83''
88''
93''
100''
108''
87''
90''
100''
105''
110' '
120''
125''
130''
73''
78''
83''
88''
93''
100''
108''
87''
90''
100''
105''
110''
120''
125''
130''
To Set The Projector Wall Mount On The Wall
● The bracket is suitable for concrete wall mounting or wooden stud wall.
● Concrete wall mounting thickness must be a minimum 100mm. Anchor bolt and screw
(M6 × 55) are needed to be used for installation.
● Dry-wall mounting thickness must be a minimum 70mm. Only screw(M6 × 55) is needed
to be used for installation, and gypsum board
thickness not greater than 3/8 inch. If the wall
is not strong enough, reinforce it sufficiently
before installation.
● Please contact manufacturer if you have
any questions about mounting surface issue.
>55mm
ø10~11mm b
Concrete wall mounting
Use anchor bolt
>55mm
ø3mm
Dry-wall mounting
Not use anchor bolt
c
a
screw (M6 × 55) are needed to be used
for installation in concrete wall mounting
screw central
point
When installation on the
wood stud wall,the stud
position of the mount wall
surface shall be defined,
the fixed screw central
point shall be aligned with
the central line of stud.
To set the projector wall mount on the wall
screw (M6 × 55) are needed to be used
for installation in dry-wall mounting
ＥＮＧＬＩＳＨ
Remove the
decorative cover
Loose the screws e
c
a
a Sc rew “g” to setting plate with L5 alle n ke y in ad van ce but.
do no t tig hte n it.
b L oos en the scre ws with L3 allen key, pu ll ou t the setting.
plate and put the pow er cable an d other cables th roug h
th e se tt in g plat e.
d
g
c
cf
To Set The Projector Wall Mount On The Wall
● Move the raised Wall plate and adjust the upward/downward slide.
A
B
A
B
75mm
Adjustment
direction
To Install The Projector On The Projector Wall Mount
ＥＮＧＬＩＳＨ
Wall cover
Adjust the upward/downward
slide:75mm
● All ow t o adjust the projector upward/downward by
regulating l ead screw.You can adj ust the projector
upward/downward according to your need.
Note: r egu lating lead
screw m ust b e in the
slo t o f w a ll pla te.
Adj u st t he up ward /
-do w nwa rd s lide:7 5mm
● Tighten the screw “f” to wall plate but
do not tighten it. Fasten it after locating
the regulating lead screw position.
A
A
B
B
● Move the mouting plate and adjust the leftward/rightward slide.
Adjustment direction
AB
Adjust the leftward/
rightward slide:30mm
30mm
To Install The Projector On The Projector Wall Mount
To Adjust The Vertical Tilt
A
B
Adjustment buttons
Adjustment
direction
To Adjust The Horizontal Roll
ＥＮＧＬＩＳＨ
● Locking the screw e. ● Connect the power cable and other cables to
the projector.
Connect the power cable
and other cables to the projector.
e
AB
AB
Adjustment buttons Adjustment direction
AB
A
B
Adjustment buttons Adjustment direction
To Adjust The Horizontal Rotation
ＥＮＧＬＩＳＨ
AB
To Adjust The Forward/Backward Slide
A
B
A
B
AB
d
Adjustment direction
Product Information:
To Put On The Decorative Cover
Net weight: 4.5kg Rated capacity: 15kg
Adjustable angle: Longitudinal inclination、Level angle、Yaw angle±5°(3 directions)
Adjustable range: From the installation plate center horizontal distance 315mm 535mm
Adjustable range for upward/downward slide : 75mm
Adjustable range for leftward/rightward slid: 30mm
Table des matières
Autres manuels BenQ Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
