■Alarm Function
1． Hold for 10 seconds to enter Alarm function.
2. Turn the Volume knob to change alarming volume.
3． If there is frequency in stored channel, the transceiver will auto transmit.
4． Under Alarm function, the transceiver rings and transmits for 20 seconds, and there are 10 seconds between
the first and second ringing. After recycling for 3 times, it exits, then back to normal state.
5． While alarming during 10 seconds, the transceiver exits when receiving signal, then back to normal state.
6． While alarming, you can also press "PTT" to exit.
■Calling Function
1． Press then release it shortly，transceiver enters calling state; A calling signal is transmitted,
and it lasts for 4 seconds。
2． Under calling state, you can press PTT to stop calling, back to standby state.
3． When calling is received, the transceiver rings, and matched icon flickers in the screen.
■Key lock On/Off
1Under standby mode hold ， for one second to switch key lock on/off.
五、FM Radio Function
1、Turn On/Off FM Radio
Under standby mode，press Fto enter FM Radio function，then press "MONI" to switch FM Radio on/off. When radio is on,
LCD screen displays“AO”。Under Full Frequency mode，you can input 4-5 digital numbers, or you can press ▲、▼to change the
radio frequency; frequency step is 50K；Under CH mode，you can press▲、▼ or input 2 digital numbers（01~25）to change current
channel.
2、Select Frequency/CH Mode
Under FM Radio mode, press # to switch FM radio's Frequency/CH mode。（You can't switch when FM Radio is off.）
3、Search Broadcast Channel
Under FM Radio mode, you can use this function to quickly get your needed channel.
Under FM radio frequency mode，press F to enter this function，then press 6to search broadcast channel.
LCD displays“RS UP/d N”. You can press ▲、▼to change searching direction. Press any other key to exit searching.
When certain channel is searched, FM radio stops at the searched frequency and then exits.
While searching, press PTT, and it will auto exit.
4、Set MONI Mode
Setting Way：Under FM Radio mode，press Fto enter function option，then press 9to enter this function；Select DW，then press
F to enter; press ▲、▼to select，finally press F to confirm。
NOTE：When DW is ON，you can MONI signal under FM radio mode; while receiving signal, it will exit FM radio mode to enter
receiving mode. After speaking, it will auto return to FM radio mode.
When D Wis OFF, it will stay in FM radio mode.
5、Set SQL Level
Under FM Radio mode，press Fto function option，then press 1to set SQL level. You can press ▲、▼ to select level 0~9. Then
