Bender RCMB423EM Manuel utilisateur

Manual

RCMB423EM

Residual current monitor

for monitoring AC-, DC- and pulsed DC currents

in TN- and TT systems

Software version: D480 V1.01

RCMB423_D00241_01_M_XXEN/12.2016

Bender GmbH & Co. KG

P.O. Box 1161 • 35301 Gruenberg • Germany

Londorfer Strasse 65 • 35305 Gruenberg • Germany

Tel.: +49 6401 807-0 • Fax: +49 6401 807-259

E-Mail: [email protected] • www.bender.de

©Bender GmbH & Co. KG

Reprinting only with permission of the publisher.

Subject to change!

Photos: Bender archives

Table of Contents

RCMB423_D00241_01_M_XXEN/12.2016

1. Important information .................................................................................... 5

1.1 How to use this manual ................................................................................. 5

1.2 Technical support: service and support ................................................... 6

1.2.1 First level support ............................................................................................. 6

1.2.2 Repair service ..................................................................................................... 6

1.2.3 Field service ........................................................................................................ 7

1.3 Training courses ................................................................................................ 8

1.4 Delivery conditions .......................................................................................... 8

1.5 Inspection, transport and storage .............................................................. 8

1.6 Warranty and liability ...................................................................................... 9

1.7 Disposal ............................................................................................................ 10

2. Safety instructions ......................................................................................... 11

2.1 General safety instructions ........................................................................ 11

2.2 Work activities on electrical installations ............................................. 11

2.3 Intended use ................................................................................................... 12

2.4 Information about factory setting .......................................................... 12

3. Function ........................................................................................................... 13

3.1 Device characteristics .................................................................................. 13

3.2 Description of functions ............................................................................. 13

3.2.1 Connection monitoring .............................................................................. 14

3.2.2 Self-test, automatic ....................................................................................... 14

3.2.3 Self-test, manual ............................................................................................ 14

3.2.4 Malfunction ..................................................................................................... 14

3.2.5 Delay times t, ton and toff .......................................................................... 14

3.2.6 External, combined test or reset button T/R ....................................... 15

Table of Contents

4RCMB423_D00241_01_M_XXEN/12.2016

4. Installation and connection ......................................................................... 17

5. Operation and configuration ...................................................................... 19

5.1 Display elements in use .............................................................................. 19

5.2 Function of the operating elements ...................................................... 20

5.3 Menu structure ............................................................................................... 21

5.3.1 Quick menu ..................................................................................................... 22

5.3.2 Full menu .......................................................................................................... 24

5.4 Parameter settings ........................................................................................ 27

5.5 Explanatory notes on the setting parameters .................................... 28

5.5.1 Menu out .......................................................................................................... 28

5.5.2 Menu t (Set delay times) ............................................................................. 29

5.5.3 Menu SEt ........................................................................................................... 29

5.6 Menu InF (Querying device information) ............................................. 29

5.7 Menu HiS (Erasable history memory) ..................................................... 30

6. Setting ranges, factory setting, LEDs ......................................................... 31

6.1 Parameters ....................................................................................................... 31

6.2 Meaning of the LEDs .................................................................................... 33

7. Technical data ................................................................................................ 35

7.1 Tabular data .................................................................................................... 35

7.2 Standards, approvals and certifications ................................................ 39

7.3 Ordering information ................................................................................... 39

7.4 Error codes ....................................................................................................... 40

INDEX .................................................................................................................... 41

RCMB423_D00241_01_M_XXEN/12.2016

1. Important information

1.1 How to use this manual

Always keep this manual within easy reach for future reference.

To make it easier for you to understand and revisit certain sections in this man-

ual, we have used symbols to identify important instructions and information.

The meaning of these symbols is explained below:

This manual is intended for qualified personnel working in

electrical engineering and electronics!

This signal word indicates that there is a high risk of danger

that will result in electrocution or serious injury if not

avoided.

This signal word indicates a medium risk of danger that

can lead to death or serious injury if not avoided.

This signal word indicates a low level risk that can result in

minor or moderate injury or damage to property if not

avoided.

This symbol denotes information intended to assist the user

in making optimum use of the product.

DANGER

WARNING

CAUTION

Important information

6RCMB423_D00241_01_M_XXEN/12.2016

This manual has been compiled with great care. It might nevertheless contain

errors and mistakes. Bender cannot accept any liability for injury to persons or

damage to property resulting from errors or mistakes in this manual.

1.2 Technical support: service and support

For commissioning and troubleshooting Bender offers you:

1.2.1 First level support

Technical support by phone or e-mail for all Bender products

 Questions concerning specific customer applications

 Commissioning

 Troubleshooting

Telephone: +49 6401 807-760*

Fax: +49 6401 807-259

In Germany only: 0700BenderHelp (Tel. and Fax)

E-mail: [email protected]

1.2.2 Repair service

Repair, calibration, update and replacement service for Bender products

 Repairing, calibrating, testing and analysing Bender products

 Hardware and software update for Bender devices

 Delivery of replacement devices in the event of faulty or incorrectly

delivered Bender devices

 Extended guarantee for Bender devices, which includes an in-house

repair service or replacement devices at no extra cost

Telephone: +49 6401 807-780** (technical issues)

+49 6401 807-784**, -785** (sales)

Fax: +49 6401 807-789

E-mail: [email protected]

Please send the devices for repair to the following address:

Important information

RCMB423_D00241_01_M_XXEN/12.2016

Bender GmbH, Repair-Service,

Londorfer Str. 65,

35305 Gruenberg

1.2.3 Field service

On-site service for all Bender products

 Commissioning, configuring, maintenance, troubleshooting of Bender

products

 Analysis of the electrical installation in the building (power quality test,

EMC test, thermography)

 Training courses for customers

Telephone: +49 6401 807-752**, -762 **(technical issues)

+49 6401 807-753** (sales)

Fax: +49 6401 807-759

E-mail: fieldservice@bender-service.de

Internet: www.bender-de.com

*Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC+1)

**Mo-Thu 7.00 a.m. - 8.00 p.m., Fr 7.00 a.m. - 13.00 p.m

Important information

8RCMB423_D00241_01_M_XXEN/12.2016

1.3 Training courses

Bender is happy to provide training regarding the use of test equipment.

The dates of training courses and workshops can be found on the Internet at

www.bender-de.com -> Know-how -> Seminars.

1.4 Delivery conditions

Bender sale and delivery conditions apply.

For software products the "Softwareklausel zur Überlassung von Standard-

Software als Teil von Lieferungen, Ergänzung und Änderung der Allgemeinen

Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie"

(software clause in respect of the licensing of standard software as part of de-

liveries, modifications and changes to general delivery conditions for prod-

ucts and services in the electrical industry) set out by the ZVEI (Zentralverband

Elektrotechnik- und Elektronikindustrie e. V.) (German Electrical and Electron-

ic Manufacturer's Association) also applies.

Sale and delivery conditions can be obtained from Bender in printed or elec-

tronic format.

1.5 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the

contents of the package with the delivery documents. In the event of damage

in transit, please contact Bender immediately.

The devices must only be stored in areas where they are protected from dust,

damp, and spray and dripping water, and in which the specified storage tem-

peratures can be ensured.

Important information

RCMB423_D00241_01_M_XXEN/12.2016

1.6 Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to

property are excluded if they can be attributed to one or more of the follow-

ing causes:

 Improper use of the device.

 Incorrect mounting, commissioning, operation and maintenance of the

device.

 Failure to observe the instructions in this operating manual regarding

transport, commissioning, operation and maintenance of the device.

 Unauthorised changes to the device made by parties other than the

manufacturer.

 Non-observance of technical data.

 Repairs carried out incorrectly and the use of replacement parts or

accessories not approved by the manufacturer.

 Catastrophes caused by external influences and force majeure.

 Mounting and installation with device combinations not recom-

mended by the manufacturer.

This operating manual, especially the safety instructions,

must be observed by all personnel working on the device. Furthermore,

the rules and regulations that apply for accident prevention at the place of use

must be observed.

Important information

10 RCMB423_D00241_01_M_XXEN/12.2016

1.7 Disposal

Abide by the national regulations and laws governing the disposal of this de-

vice. Ask your supplier if you are not sure how to dispose of the old equip-

ment.

The directive on waste electrical and electronic equipment (WEEE directive)

and the directive on the restriction of certain hazardous substances in electri-

cal and electronic equipment (RoHS directive) apply in the European Commu-

nity. In Germany, these policies are implemented through the "Electrical and

Electronic Equipment Act" (ElektroG). According to this, the following applies:

 Electrical and electronic equipment are not part of household waste.

 Batteries and accumulators are not part of household waste and must

be disposed of in accordance with the regulations.

 Old electrical and electronic equipment from users other than private

households which was introduced to the market after 13 August 2005

must be taken back by the manufacturer and disposed of properly.

For more information on the disposal of Bender devices, refer to our

homepage at www.bender-de.com -> Service & support.

Table des matières

Autres manuels Bender Instrument de mesure

Bender

Bender ISOMETER isoPV425 with AGH420 Manuel utilisateur

Bender

Bender MK2007CBM Manuel utilisateur

Bender

Bender PEM330 Manuel utilisateur

Bender

Bender ISOMETER isoBAT425 Manuel utilisateur

Bender

Bender ISOMETER isoUG425 Manuel utilisateur

Bender

Bender ISOMETER iso685W-D-P Manuel utilisateur

Bender

Bender ISOMETER isoGEN423 Manuel utilisateur

Bender

Bender ISOMETER isoES425 Manuel utilisateur

Bender

Bender ISOMETER IR425-D4M 1C Manuel utilisateur

Bender

Bender RCMA423 Manuel utilisateur

Bender

Bender COMTRAXX COM465ID Manuel utilisateur

Bender

Bender RCMA426H Manuel utilisateur

Bender

Bender ISOMETER IR423-D4 Manuel utilisateur

Bender

Bender ISOMETER isoUG425 Manuel utilisateur

Bender

Bender ISOMETER isoCHA425 Manuel utilisateur

Bender

Bender ISOMETER isoCHA425HV Manuel utilisateur

Bender

Bender ISOMETER isoCHA425HV Manuel utilisateur

Bender

Bender RCMB101 Manuel utilisateur

Bender

Bender isoMED427 Manuel utilisateur

Bender

Bender VMD420 Manuel utilisateur

Bender

Bender PEM330 Manuel utilisateur

Bender

Bender PEM735 Manuel utilisateur

Bender

Bender CMD420 Manuel utilisateur

Bender

Bender PEM353 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur