Bend-Pak PL-6KDT Manuel utilisateur

1645 Lemonwood Dr.

Santa Paula, CA 93060 USA

Toll Free: (800) 253-2363

Tel: (805) 933-9970

bendpak.com

Double- and Triple-Wide Parking Lifts

Installation and Operation Manual

Manual P/N 5900056 — Manual Revision D — October 2021

Models:

•PL-6KDT

•PL-6KDTX-21

•PL-6KDW

•PL-6KT

Model PL-6KDT shown.

Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.

⚠

DANGER

IMPORTANT SAFETY INSTRUCTIONS, SAVE THESE

INSTRUCTIONS!

Read the entire contents of this Manual

before

installing, operating, servicing, or maintaining this product. Failure to

follow the instructions and safety precautions in this Manual can result in

serious injury or death. Make sure all other operators also read this

Manual. Keep the Manual near the product for future reference.

proceeding with installation and operation, you agree that you

fully understand the contents of this Manual and assume full

responsibility for product use

Manual. PL-6K Series Parking Lifts, Installation and Operation Manual, Manual P/N 5900056, Manual

Revision D, Released October 2021.

agree that: you will give full attribution to BendPak Inc., you will not make changes to the content, you do not gain

any rights to this content, and you will not use the copies for commercial purposes.

Trademarks. BendPak and the BendPak logo are registered trademarks of BendPak Inc. All other company,

product, and service names are used for identification only. All trademarks and registered trademarks mentioned

in this Manual are the property of their respective owners.

Limitations. Every effort has been made to ensure complete and accurate instructions are included in this

Manual. However, product updates, revisions, and/or changes may have occurred since this Manual was

published. BendPak reserves the right to change any information in this Manual without incurring any obligation for

equipment previously or subsequently sold. BendPak is not responsible for typographical errors in this Manual.

You can always find the latest version of the manual for your product on the BendPak website.

Warranty. The BendPak warranty is more than a commitment to you: it is also a commitment to the value of

your new product. Contact your nearest BendPak dealer or visit www.bendpak.com/support/warranty for

full warranty details. Go to bendpak.com/support/register-your-product/ and fill out the online form to register

your product (be sure to click Submit).

Safety.Your Lift was designed and manufactured with safety in mind. However, your safety also depends on

proper training and thoughtful operation. Do not install, operate, maintain, or repair the unit without reading and

understanding this Manual and the labels on the unit;

do not use your Lift unless you can do so safely!

Owner Responsibility. In order to maintain your product properly and to ensure everyone’s safety, it is the

responsibility of the product owner to read and follow these instructions:

• Follow all installation, operation, and maintenance instructions.

• Make sure product installation conforms to all applicable local, state, and federal codes, rules, and regulations,

such as state and federal OSHA regulations and electrical codes.

• Read and follow all safety instructions. Keep them readily available for operators.

• Make sure all operators are properly trained, know how to safely operate the unit, and are properly supervised.

• Do not operate the product until you are certain that all parts are in place and operating correctly.

• Carefully inspect the product on a regular basis and perform all maintenance as required.

• Service and maintain the unit only with approved replacement parts.

• Keep instructions permanently with the product and make sure all labels are clean and visible.

• Only use the Lift if it can be used safely!

Unit Information. Enter the Model Number, Serial

Number, and the Date of Manufacture from the Label

on your unit. This information is required for part or

warranty issues.

Model:

Serial:

Date of Manufacture:

PL-6K Series of Parking Lifts 3P/N 5900056 — Rev. D — October 2021

Table of Contents

Introduction 3 Installation 12

Shipping Information 4 Operation 50

Safety Considerations 4 Maintenance 53

Components 7 Troubleshooting 55

FAQs 8 Wiring Diagrams 57

Will My Car Fit? 9 Labels 61

Specifications 10 Parts Drawings 64

Installation Checklist 11 Maintenance Logs 80

Introduction

This Manual describes the PL-6K Series of parking lifts, which let you park double or triple the number

of Vehicles in a parking area. Each Platform supports up to 6,000 lbs. (2,722 kg).

There are four models in the PL-6K Series:

•PL-6KDT: Parking Lift with two independent Platforms.

•PL-6KDTX-21: Wide Parking Lift with two independent Platforms. Special order only.

•PL-6KDW:

Extra

wide

Parking Lift with two independent Platforms.

•PL-6KT: Parking Lift with three independent Platforms.

All models are similar, so if no distinction is made, then the information applies to all models. If

information applies to only one model, that distinction is mentioned in text.

More information about the full line of BendPak products can be found at bendpak.com.

This Manual is mandatory reading for all users of PL-6K Series Lifts, including

anyone who installs, uses, maintains, repairs, or wants to know more about them.

⚠DANGER Be extremely careful when installing, operating, maintaining, or repairing this

equipment; failure to do so could result in property damage, product damage,

injury, or (in very rare cases) death. Make sure only authorized personnel operate

this equipment. All repairs must be performed by an authorized technician. Do not

make modifications to the unit; this voids the warranty and increases the chances

of injury or property damage. Make sure to read and follow the instructions on the

labels on the unit.

Keep this Manual on or near the equipment so that anyone who uses or services it can read it.

If you are having issues, refer to the Troubleshooting section of this Manual for assistance.

PL-6K Series of Parking Lifts 4P/N 5900056 — Rev. D — October 2021

Technical support and service is available from your dealer, on the Web at bendpak.com/support,

by email at support@bendpak.com, or by phone at (800) 253-2363, extension 196.

You may also contact BendPak for parts replacement information (please have the model and serial

number of your unit available) at (800) 253-2363, extension 191.

Shipping Information

Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect

the shipment

before

you sign to acknowledge that you received it.

When you sign a bill of lading, it tells the carrier that the items on the invoice were received in good

condition.

To protect yourself, do not sign until

after

you have inspected the shipment.

If any of

the items listed on the bill of lading are missing or are damaged, do not accept the shipment until the

carrier makes a notation on the bill of lading that lists the missing and/or damaged goods.

If you discover missing or damaged goods

after

you receive the shipment and have signed the bill of

lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not

make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a

specific date) and that the carrier has failed to comply with your request.

It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this

happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of

lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you

process your claim does not make us responsible for collection of claims or replacement of lost or

damaged materials.

Safety Considerations

Read this Manual carefully before installing or using your new product

.Do not

install or operate the product until you are familiar with all operating instructions and warnings. Do not

allow anyone else to operate it until they are familiar with all operating instructions and warnings. Keep

this Manual on or near the product for future reference.

⚠WARNING California Proposition 65:This product can expose you to chemicals including

styrene and vinyl chloride which are on the list of over 900 chemicals identified by

the State of California to cause cancer, birth defects or reproductive harm. Always

use this product in accordance with BendPak’s instructions. For more information,

visit www.p65warnings.ca.gov.

Important Safety Information

When using this equipment, basic safety precautions should always be followed, including:

•Read all instructions. Use only as described in this manual.

•Only operate your Lift between temperatures of 41°F to 104°F (5°C to 40°C).

•Make sure all operators read and understand this Installation and Operation Manual.

Keep the

manual near the Lift at all times

•The Lift should only be operated by authorized personnel. Keep children and untrained personnel

away from the Lift.

PL-6K Series of Parking Lifts 5P/N 5900056 — Rev. D — October 2021

•Do not make any modifications to the Lift; this voids the warranty and increases the chances of

injury or property damage. Use only factory-approved attachments.

•Do not use the Lift while tired or under the influence of drugs, alcohol, or medication.

•Do not touch hot parts; you could be burned. Always use care with the equipment.

•Do not operate equipment with a damaged cord or if the equipment has been dropped or

damaged – until it has been examined by a qualified service person.

•Do not let a cord hang over the edge of a table, bench, or counter or come in contact with hot

manifolds or moving fan blades. Loop the power cord around equipment when storing.

•If an extension cord is necessary, a cord with a current rating equal or greater than that of the

equipment should be used. Cords rated for less current than the equipment may overheat. Care

should be taken to arrange the cord so that it will not be tripped over or pulled out.

•Always unplug equipment from electrical outlets when not in use. Never use the cord to pull the

plug from the outlet. Grasp plug and pull to disconnect.

•To reduce the risk of a fire, do not operate equipment in the vicinity of open containers of

flammable liquids (like gasoline).

•Adequate ventilation should be provided when working on operating internal combustion engines.

•Keep hair, loose clothing, fingers, and all parts of the body away from moving parts.

•To reduce the risk of electric shock, do not use the unit on wet surfaces or expose to rain.

•Always wear safety glasses!Everyday glasses only have impact resistant lenses, they are not

safety glasses.

Save these instructions!

Additional Safety Information

The following safety information applies to all BendPak PL-6K Series models:

•PL-6K Series Lifts are Parking Lifts.

Use them only for their intended purpose.

•The Lift should only be operated by authorized personnel. Keep children and untrained personnel

away from the Lift.

•You must wear OSHA-approved (publication 3151) personal protective equipment at all times

when installing, using, maintaining, or repairing the Lift. Leather gloves, steel-toed work boots, eye

protections, back belts, and hearing protection are

mandatory

•The Control Box must be kept in the Off Position when the Lift is not in use.

•

Never

exceed the rated capacity of the Lift.

•When the Lift is in use, keep hands and all body parts well away from it.

•Keep loads balanced on the Lift Arm Assemblies. Clear the area immediately if a Vehicle is in

danger of falling off the Lift. Do not make modifications to the Lift.

•Modifications void the warranty and increases the chances of injury or property damage.

Do not

modify any safety-related features in any way

•The Lift uses electrical energy; if your organization has Lockout/Tagout policies, make sure to

implement them after connecting the Lift to a power source.

•When handling the Hydraulic components,

always wear safety gloves!

In rare cases, a

needle-like stream of Hydraulic Fluid (even at low pressure) can penetrate fingers, hands, or arms.

Such a puncture can feel like a bite, electric shock, or a prick. While it may seem like a minor issue,

any amount of Hydraulic Fluid injected into the human body is a serious issue. Anyone suffering

such a puncture wound should be

immediately

taken to as an emergency to the hospital to

determine the extent of the injury. Explain the circumstances of the injury to the attending

PL-6K Series of Parking Lifts 6P/N 5900056 — Rev. D — October 2021

physician, including what type of Hydraulic Fluid was involved. Do not assume a puncture wound

that could have been caused by Hydraulic Fluid is a minor issue; it could be life-threatening.

•Make a visual inspection of the Lift before using it. Do not use the Lift if you find any missing or

damaged parts. Instead, take it out of service, then contact an authorized repair facility, your

distributor, or BendPak at (805) 933-9970 or email support@bendpak.com.

•BendPak recommends making a

thorough

inspection of the Lift at least once a year. Replace

any damaged or severely worn parts, decals, or warning labels.

Symbols

Following are the symbols used in this Manual:

⚠DANGER Calls attention to an immediate hazard that will result in death or severe injury.

⚠WARNING Calls attention to a hazard or unsafe practice that could result in death or severe

personal injury.

⚠CAUTION Calls attention to a hazard or unsafe practice that could result in minor personal

injury, product damage, or property damage.

NOTICE Calls attention to a situation that, if not avoided, could result in product or property

damage.

Liability Information

BendPak Inc. assumes no liability for damages resulting from:

• Use of the equipment for purposes other than those described in this Manual.

• Modifications to the equipment without prior, written permission from BendPak.

•Modifying, disabling, overriding, or removing safety features.

• Damage to the equipment from external influences.

• Incorrect operation of the equipment.

PL-6K Series of Parking Lifts 7P/N 5900056 — Rev. D — October 2021

Components

The components of your Lift include:

•Control Box. Houses the controls that raise and lower Platforms.

•Control Post. The Post on which the Control Box is mounted.

•Power Unit. Provides hydraulic power to the Hydraulic Cylinders that raise and lower Platforms.

•Power Post. The Post on which the Power Unit is mounted.

•Approach Ramps. One for each Platform. Use them to drive onto and off of Platforms.

•Platforms. The metal surface that holds raised Vehicles. All four Tires of the Vehicle

must

fit on

the Platform.

•Front and Rear Beams. Part of the Lift structure. The Front Beam is on the opposite side from

the Approach Ramps. The Rear Beam is above the Approach Ramps (the Approach end).

•Crossbeams. Also part of the Lift structure. The Powerside Crossbeam and the Center

Crossbeam(s) both support a Hydraulic Cylinder and Safety Lock on top. The Offside Crossbeam

is part of the structure of the Lift.

•Offside Posts. All four Posts are part of the structure of the Lift. The Control Post and the Power

Post have special functions, mentioned above; the Offside Posts are part of the structure.

Model PL-6KDT shown; the PL-6KDW is wider and the PL-6KT has a third Platform and a second

Center Crossbeam.

PL-6K Series of Parking Lifts 8P/N 5900056 — Rev. D — October 2021

Frequently Asked Questions

Question: What kinds of vehicles can I park on my PL-6K Series Lift?

Answer: Cars, light trucks, and SUVs; up to 6,000 lbs. (2,722 kg) per Platform.

Q: Does the Lift have to be anchored in place?

A: Yes. The Posts

must

be anchored.

Q: Can I use my Lift to store boxes of stuff instead of a Vehicle?

A: No. This is not the intended use of the Lift; it is not designed to be used this way.

Q: How high does my garage ceiling have to be to support my Vehicles?

A: It depends on the height of the Vehicles you are putting on the Platforms. If you are parking low-

slung Vehicles, then your ceiling does not have to be as high as it would need to be if you are parking

taller Vehicles. Refer to Will My Car Fit? for additional information.

Q: Does the Control Box have to be on the Control Post?

A: Yes. That location gives the operator a clear view of the Platforms as they are raised and lowered.

Q: Does it matter if I drive my Vehicles in front first or back them in?

A: No. Your Lift works great either way. Make sure to park all Vehicles in the middle of the Platform,

width-wise, no matter which way you drive them in.

Q: Will the ‘Cables’ really hold my vehicles?

A: Yes. PL-6K Series Lifts use 3/8 inch, aircraft-quality

wire rope

that runs through oversized

Sheaves, reducing friction on them and extending their life with minimal maintenance.

Q: How long can I leave a Vehicle on a raised Platform?

A: As long as you want. Once a Safety Lock is engaged, gravity holds it in position, so a loss of power

does not impact it. Your Vehicle is going to stay where you left it. Remember to

always leave

Platforms either on the ground or engaged on their Safety Locks

PL-6K Series of Parking Lifts 9P/N 5900056 — Rev. D — October 2021

Will My Car Fit?

Your Lift accommodates a wide variety of cars, light trucks, and SUVs.

Width

Considerations for Vehicle width include:

•Platform width. The usable width of the Platform is 82 inches / 2,082 mm; your tires cannot be

wider than this.

All four tires must be fully on the Platform

; they cannot be on the side

structure or on the Ramp. Always center your Vehicles on the Platform, width-wise.

•Mirrors. Mirrors and other accessories may mean that some parts of a Vehicle are much wider

than the rest of the Vehicle. Parking lifts are designed to have lots of open space, but if you are

parking two Vehicles next to each other that both have wide mirrors or other accessories, make

sure they do not hit each other.

•Car doors. Opening Vehicle doors makes the Vehicle wider while they are open. Generally you

want to avoid opening the doors of multiple Vehicles parked next to each other at the same time.

You cannot open a car door while the Vehicle is raised, so this is not an issue for raised Vehicles.

Length

Considerations for Vehicle length include:

•Platform length. The usable length of the Platform is 150 inches / 3,802 mm; your wheelbase

cannot be longer than this.

All four tires must be fully on the Platform

; they cannot be on

the Ramp or the Tire Stop.

•Overhang. If a Vehicle’s tires are fully on the Platform, then the parts of the Vehicle hanging over

the Front Tire Stop or the Ramp are not a concern, as long as they do not hit anything.

Height

Considerations for Vehicle height include:

•Ceiling height. The height of your ceiling determines how much space you can allocate to the

two Vehicles. If you want to park a tall Vehicle on a Platform

and

under the Platform, your ceiling is

going to have to be higher than if you want to park two low-slung Vehicles.

•Formula. There’s a formula for figuring out how much height you need, based on the Vehicles

you want to park.

Height of Vehicle on Platform + 9 inches (6 inches for the height of the Platform plus 3 inches to

get off the Safety Lock) + the height of the Safety Lock position of Platform.

Add these together; your garage height needs to be higher than the sum of these values.

To find the “height of Safety Lock position of Platform”, raise a Platform and lock it on its Safety

Lock position, then measure from the ground to the bottom of the raised Platform. Note that the

Maximum Rise height listed in Specifications is how high the mechanism can go before

stopping; the Safety Lock height is close to,

but not the same as

, Maximum Rise.

PL-6K Series of Parking Lifts 10 P/N 5900056 — Rev. D — October 2021

Specifications

Model PL-6KDT PL-6KDTX-21 PL-6KDW PL-6KT

# of Platforms 2 2 2 3

Load capacity per

Platform

6,000 lbs. / 2,722 kg

aTotal width 211" /

5,352 mm

250" /

6,350 mm

268" /

6,811 mm

308" /

7,834 mm

bTotal length 236.5" / 6,008 mm

cPost height 100.25" / 2,553 mm

dTotal height 122.75" / 3,117 mm

eMin. runway height 8" / 206 mm

fMaximum rise 95.25" / 2,420 mm

gWidth between Posts 185.5" /

4,715 mm

225" /

5,713 mm

243" /

6,174 mm

283" /

7,197 mm

hPlatform width 96" / 2,438 mm

iUsable Platform width 82" / 2,086 mm

jPlatform length

(with Approach ramp)

164" / 4,162 mm

Safety Lock Positions 7

Lifting time ≈45 seconds

Motor 220 VAC, 50/60 Hz, 1 Ph

Autres manuels pour PL-6KDT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bend-Pak Système de levage

Bend-Pak

Bend-Pak XPR-9 Manuel utilisateur

Bend-Pak

Bend-Pak HDS-18E Manuel utilisateur

Bend-Pak

Bend-Pak HDSO-14P Manuel utilisateur

Bend-Pak

Bend-Pak HD-7500 Series Manuel utilisateur

Bend-Pak

Bend-Pak XPR-12FDL Manuel utilisateur

Bend-Pak

Bend-Pak XPR-10AXLS Manuel utilisateur

Bend-Pak

Bend-Pak EV2400SL Instruction manuelle

Bend-Pak

Bend-Pak GP-7LCS Manuel utilisateur

Bend-Pak

Bend-Pak EXCEL Series Manuel utilisateur

Bend-Pak

Bend-Pak HDS-14LSXE Manuel utilisateur

Bend-Pak

Bend-Pak Clearfloor 10APX Manuel utilisateur

Bend-Pak

Bend-Pak Quatra XR-12000L Manuel utilisateur

Bend-Pak

Bend-Pak XPR-7TR Manuel utilisateur

Bend-Pak

Bend-Pak XPR-9DT Manuel utilisateur

Bend-Pak

Bend-Pak HD-9STX Manuel utilisateur

Bend-Pak

Bend-Pak XPR-10-168 Manuel utilisateur

Bend-Pak

Bend-Pak LR-60P Manuel utilisateur

Bend-Pak

Bend-Pak MDS-6EXT Manuel utilisateur

Bend-Pak

Bend-Pak HDS-18E Manuel utilisateur

Bend-Pak

Bend-Pak XPR-12CL Manuel utilisateur

Bend-Pak

Bend-Pak HDS-14LSX Manuel utilisateur

Bend-Pak

Bend-Pak XP Series Manuel utilisateur

Bend-Pak

Bend-Pak HD-9AE Manuel utilisateur

Bend-Pak

Bend-Pak Clearfloor 10AP Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur