SYMBOLS
Read operator s manual: To reduce the risk of injury,
user must read and understand operator s manual
before using this product.
Eye protection: Always wear safety goggles, safety
glasses with side shields, or a full face shield when
operating this product.
•Avoid direct contact with accessory and work surface during and after work as they
become heated and sharp. Wear safety gloves to protect hands.
•Operators must be physically able to handle the bulk, weight, and power of tool. Do not
force the tool.
•Repetitive work motions and exposure to vibration can be harmful to hands and arms. If
numbness, tingling, pain or whitening of the skin occurs, stop using the tool.
•Stay clear of the hammer while in operation. Flying objects can cause severe injury.
•Avoid “free-running”. This occurs when the tool is not in proper contact with the work,
either sliding off or breaking through thin concrete or rock.
•Never use the hammer steel as a hand struck tool. They are designed for air hammers
only.
•Select the correct shank and retainer for the tool being used.
•Never use dull accessories as they require excessive work
pressure and can break.
•Always maintain a balanced body position and secure footing.
•Be aware of hidden hazards that may exist where you are
working, such as electric wires etc.
•This tool is not intended for use in an explosive atmosphere.
Risk to hearing Always wear ear prptection
when using this tool ,failure to do so may result
in hearing loss.
