Benchmark 1282-726 Manuel utilisateur
DANGER!
WARNING!
CAUTION!
-
Oxygen
nydrogen
Combustible
explosive
Recycle unwanted materials rather than disposing of them as waste. Sort the tools,
hoses, and packaging in specific categories and take to the local recycling center or
dispose of in an environmentally safe way.
Potential hazard that will result in serious injury or death.
VIBRATION PRECAUTION!
Read and follow the safety instructions before
using the vibrating tool to avoid temporary or
permanent physical
injury, particularly to the
hands, arms, and shoulders, and
to reduce the
risk of vibration-related injury.
•
Sparks that are created when cutting may ignite flammable materials.
•
Never use this tool in the presence of any flammable materials, liquids, or gases.
•
Always ensure the cutting discs utilized with this tool are rated at or
•
above the speed rating of the tool (18,000 RPM).
•
Failure to properly match the accessory to the tool could result in serious personal
injury.
•
Ensure the cutting discs are tightened properly before operating the
•
tool and after changing the cutting disc.
•
Do not use additional and excessive force on the tool when cutting.
•
Failure to comply could lead to serious injury or loss of life.
•
Disconnect the tool from the air supply before changing
•
accessories, servicing or performing maintenance.
•
Heavy vibration from an air tool may result in injury to the hand, fingers
•
and wrist of operator during a long period of operation. Stop using the air tool if you
feel pain. Resume use of an air tool after consulting with a doctor, confirming that
there is no problem concerning the use of the air tool.
Potential hazard that could result in serious injury or death.
Keep hands and other body parts away from work areas when connecting the
tool to the air supply.
•
Use only recommended and properly rated replacement parts and
•
cutting disc. Failure to comply could lead to serious injury or loss of life.
•
Safety guard must always be positioned so that it shadows (or blocks)
•
the users face from the cutting disc.
5
1
4
3
2
6
The pneumatic cut-off tool features a lightweight and durable composite body
that reduces vibration for comfortable use and easy grip. Safety latch on the
trigger protects against accidental
start-up. The tool is designed with a chrome plated adjustable safety guard for
greater protection while cutting. The tool is useful for cutting through a variety
of objects and materials.
e sure to use a proper air compressor with air-powered tools. The compressor
should be able to supply a minimal air delivery of 2.7 CFM @ 90 PSI to ensure
the compressor can run continuously with the tool.
Table des matières
