200663_03 Page 1
User Instructions for Remote Controlled
2kW Rotisserie Effect Fan Heater
These instructions should be read carefully and retained for future reference.
Technical S ecification
Parts list Technical Data
1. Long screws 4 pcs Model MODEL 1198 REMO E
2. Plastic wall plug 4 pcs Voltage AC 220240V Fuse 13 amp
3. Remote Control Unit (Inc Battery) 1 Pc Frequency 50Hz
4. Small Screws 4 pcs Power 1800 2000W
5. Small wall Brackets 2 pcs Lamp LED Unit
6:
Deflector Bracket (Option) 1 pcs
Dimensions
Width 480mm
Height 410mm
Depth 125mm
Fire Installation
Unpack the heater carefully and retain all packaging for future use. Ensure that all packing items are removed and read any warning
labels carefully (see Maintenance Section).
The a liance must be ositioned so that the lug is accessible. Only when you are certain that you have com leted
the installation should you lug in and switch on at the wall socket.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, this appliance must not be supplied
through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Important Notes
•These Instructions should be read carefully and retained for the future reference.
•This heater must not be located immediately above a fixed socket outlet.
•Do not use the heater in the immediate surrounds of a bath, a shower, or a swimming pool.
•Do not cover this heater, or obstruct the air inlet or outlet, otherwise there is a risk of overheating.
•The heater must be cooled down completely before any maintenance
•This heater must be fixed against a vertical surface.
•Under no circumstances should the heater be used as a free standing appliance.
•After unpacking, please make sure that the
appliance is intact, with no signs of damage caused by transport. If in doubt, do not
use the appliance and contact the Service Centre.
•During normal operation this appliance will emit noise from the internal fan unit.
•If the supply cord is damaged, i
t must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of ex
perience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Warning: This appliance must be earthed.
The wires in the mains lead connected to this appliance are coloured in accordance with the following code:
GREEN and YELLOW Earth
BLUE Neutral
Brown Live
As the colour of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
•
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or
by the earth symbol or coloured Green or Green and Yellow.
•The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
•The wire which is coloured Brown must be connected to the terminal which is marked with letter L or coloured Red.
