BELL LABS INNOVATIONS Lucent Technologies Stinger MS+ Manuel utilisateur

Stinger®MS+

Getting Started Guide

Part Number: 363-217-002R9.7

For software version 9.7.0

August 2004

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in

any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or

licensing, without the express written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to

techcomm@lucent.com.

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is

subject to change. For latest information, refer to online product documentation at www.lucent.com/support.

European Community (EC) RTTE compliance

Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential require-

ments and other relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE) Directive 1999/5/EC.

To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation

library at http://www.lucentdocs.com/ins.

Safety, compliance, and warranty Information

Before handling any Lucent Access Networks hardware product, read the Edge Access and Broadband Access Safety and Compliance Guide included

in your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and network

compatibility requirements of your country. See the warranty card included in your product package for the limited warranty that Lucent

Technologies provides for its products.

Security statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other

brand and product names are trademarks of their respective holders.

Ordering Information

You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.

Feedback

To comment on this information product, go to the Online Comment Form (http://www.lucent-info.com/comments/enus/) or email your comments

to the Comments Hotline (comments@lucent.com).

Customer Service

Stinger® MS+ Getting Started Guide iii

Customer Service

Product and service information, and software upgrades, are available 24 hours a day.

Technical assistance options accommodate varying levels of urgency.

Finding information and software

To obtain software upgrades, release notes, and addenda for this product, log in to

Lucent OnLine Customer Support at http://www.lucent.com/support.

Lucent OnLine Customer Support also provides technical information, product

information, and descriptions of available services. The center is open 24 hours a day,

seven days a week. Log in and select a service.

Obtaining technical assistance

Lucent OnLine Customer Support at http://www.lucent.com/support provides access

to technical support. You can obtain technical assistance through email or the

Internet, or by telephone. If you need assistance, make sure that you have the

following information available:

■Active service or maintenance contract number, entitlement ID, or site ID

■Product name, model, and serial number

■Software version

■Software and hardware options If supplied by your carrier, service profile

identifiers (SPIDs) associated with your line

■Your local telephone company’s switch type and operating mode, such as AT&T,

5ESS Custom or Northern Telecom National ISDN-1

■Whether you are routing or bridging with your Lucent product

■Type of computer you are using

■Description of the problem

Obtaining assistance through email or the Internet

If your services agreement allows, you can communicate directly with a technical

engineer through Email Technical Support or a Live Chat. Select one of these sites

when you log in to http://www.lucent.com/support.

Calling the technical assistance center (TAC)

If you cannot find an answer through the tools and information of Lucent OnLine

Customer Support or if you have a very urgent need, contact TAC. Access Lucent

OnLine Customer Support at http://www.lucent.com/support and click Contact Us

for a list of telephone numbers inside and outside the United States.

Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North

America for a menu of Lucent services. Or call +1 510-747-2000 for an operator. You

must have an active services agreement or contract.

Stinger® MS+ Getting Started Guide v

Contents

Customer Service ........................................................................................................iii

About This Guide ..............................................................................xiii

What is in this guide .................................................................................................xiii

What you should know.............................................................................................xiii

Documentation conventions.....................................................................................xiii

Stinger documentation set ........................................................................................xiv

Chapter 1 Preparing for the Installation...........................................................1-1

Stinger MS+ overview.............................................................................................. 1-1

The Stinger MS+ chassis .................................................................................... 1-1

Modular plug-in components ............................................................................ 1-3

Selecting an installation site ..................................................................................... 1-3

Required tools and equipment................................................................................. 1-4

Preventing static discharge damage.......................................................................... 1-4

Use a wrist strap................................................................................................. 1-4

Remove plastics from your work area ............................................................... 1-6

Store components properly ............................................................................... 1-6

Unpacking the Stinger.............................................................................................. 1-6

Verifying the hardware configuration...................................................................... 1-6

Checking the front of the chassis....................................................................... 1-7

Verifying the control module model ........................................................... 1-7

Control module support .............................................................................. 1-8

Control module interfaces........................................................................... 1-8

Checking the LIMs ...................................................................................... 1-9

Checking the of the chassis.............................................................................. 1-10

Verifying the trunk module ...................................................................... 1-10

Checking the LPMs ................................................................................... 1-12

Chapter 2 Installing a Stinger MS+ ...................................................................2-1

Before you begin ...................................................................................................... 2-1

Mounting the unit.................................................................................................... 2-1

Connecting cables to a Stinger unit.......................................................................... 2-3

Connecting to the LPMs .................................................................................... 2-3

Securing the connectors .............................................................................. 2-3

Connecting the subscriber lines .................................................................. 2-4

Connecting the trunk modules.......................................................................... 2-5

Optical trunk module connections.............................................................. 2-5

DS3-ATM or E3-ATM trunk module connections ...................................... 2-5

vi Stinger® MS+ Getting Started Guide

Contents

Control module connections.................................................................................... 2-6

System clocking........................................................................................................ 2-7

Alarm monitoring .................................................................................................... 2-7

Connecting to monitor Stinger unit alarm status .............................................. 2-7

Connecting a Stinger unit to monitor the alarm status of other devices........... 2-8

Connections from the control module ........................................................ 2-8

What’s next .............................................................................................................. 2-9

Chapter 3 Determining the Operating Status ..................................................3-1

Before you begin ...................................................................................................... 3-1

Connecting power to a Stinger unit ......................................................................... 3-1

Turning on power to a Stinger unit ......................................................................... 3-2

Status lights .............................................................................................................. 3-3

Control module status lights.............................................................................. 3-3

LIM status lights................................................................................................. 3-5

Trunk module status lights ................................................................................ 3-5

Fan status light................................................................................................... 3-5

What’s next .............................................................................................................. 3-6

Chapter 4 Stinger Operational Overview.........................................................4-1

Stinger MS+ operation as a DSL access multiplexer ................................................ 4-1

Stinger ATM switching overview ............................................................................. 4-2

Stinger configuration overview................................................................................ 4-2

Control module configuration ........................................................................... 4-2

Line interface module (LIM) configuration ....................................................... 4-2

Trunk module configuration ............................................................................. 4-3

System clocking modes...................................................................................... 4-3

Stinger management features .................................................................................. 4-3

Using the command-line interface .................................................................... 4-3

Onboard flash memory and software updates................................................... 4-4

SNMP support.................................................................................................... 4-4

RADIUS support ................................................................................................ 4-4

Tracking system activity..................................................................................... 4-4

Verifying software and control module versions ........................................ 4-5

Status windows ........................................................................................... 4-5

What’s next .............................................................................................................. 4-5

Chapter 5 Configuring the Control Module and System Timing ....................5-1

Control module configuration overview.................................................................. 5-1

Administrative connections...................................................................................... 5-1

Serial connection to a console ........................................................................... 5-2

Network connection to a workstation console .................................................. 5-2

Connecting a dial-in backup management connection ..................................... 5-3

Backup management with an external modem.......................................... 5-3

Modem country codes................................................................................. 5-4

Backup management with an internal modem .......................................... 5-5

Logging into the control module.............................................................................. 5-6

Restricting administrative access .............................................................................. 5-7

Changing defaults for serial-port logins............................................................. 5-7

Changing the default admin password .............................................................. 5-8

Contents

Stinger® MS+ Getting Started Guide vii

Setting a Telnet password .................................................................................. 5-9

Providing a basic system IP configuration................................................................ 5-9

IP address syntax ............................................................................................. 5-10

Netmasks.......................................................................................................... 5-10

Subnets...................................................................................................... 5-10

Assigning the Ethernet IP addresses ................................................................ 5-12

Defining the soft IP interface ........................................................................... 5-12

Configuring a default route ............................................................................. 5-13

Verifying a LAN connection for administrators............................................... 5-14

Configuring system clocking .................................................................................. 5-14

Using the default (controller) clock source...................................................... 5-14

Using the BITS clock source............................................................................. 5-15

Loss of BITS signal indications and fall-back............................................. 5-15

Changing the BITS clock source................................................................ 5-16

Using a LIM or trunk module clock source ..................................................... 5-16

Configuring trunk ports as eligible clock sources...................................... 5-17

Typical trunk port clock source configurations ......................................... 5-17

Chapter 6 Installing and Removing Modules ...................................................6-1

Installation and replacement considerations............................................................ 6-1

Replacing and installing control modules ................................................................ 6-2

Removing a control module .............................................................................. 6-2

Installing a control module................................................................................ 6-3

Slot numbering and module placement................................................................... 6-5

Installing and replacing LIMs ................................................................................... 6-5

Installing a LIM.................................................................................................. 6-5

Replacing a LIM ................................................................................................. 6-5

Installing and replacing LPMs .................................................................................. 6-6

Installing an LPM............................................................................................... 6-6

Replacing an LPM .............................................................................................. 6-7

Installing and replacing PCMCIA cards.................................................................... 6-8

Replacing the cooling module.................................................................................. 6-8

Replacing a power filter ........................................................................................... 6-9

Replacing the alarm module .................................................................................. 6-10

Appendix A Stinger Intended Use ....................................................................... A-1

User line interfaces ...................................................................................................A-1

Network interfaces ...................................................................................................A-1

Control module interfaces........................................................................................A-2

Appendix B Cables and Connectors .................................................................... B-1

Diagnostic port and cable pinouts ............................................................................B-1

Alarm input port pinouts .........................................................................................B-2

Ethernet interface specifications ..............................................................................B-2

10BaseT cables ...................................................................................................B-3

100BaseT cables .................................................................................................B-3

LPM cable specifications...........................................................................................B-3

LPM two-wire cable specifications.....................................................................B-3

LPM four-wire cable specifications ....................................................................B-7

viii Stinger® MS+ Getting Started Guide

Contents

Appendix C Safety-Related Electrical, Physical, and Environmental

Information ................................................................................. C-1

Electrical and electronic information .......................................................................C-1

Electronic and electrical specifications...............................................................C-1

USOC jack and code information ......................................................................C-2

EMI class ............................................................................................................C-3

Minimum ground wire size ...............................................................................C-3

Physical specifications ..............................................................................................C-3

Site specifications .....................................................................................................C-4

Operating environment .....................................................................................C-4

Space requirements ...........................................................................................C-5

Special requirements and recommendations for installation and maintenance ...... C-5

Lifting requirements ..........................................................................................C-5

Index .......................................................................................... Index-1

Stinger® MS+ Getting Started Guide ix

Figures

Figure 1-1 The Stinger MS+ (front view) ........................................................... 1-2

Figure 1-2 The Stinger MS+ (rear view)............................................................. 1-2

Figure 1-3 Wrist grounding strap ....................................................................... 1-5

Figure 1-4 Wrist strap plugged into a grounding jack ........................................ 1-5

Figure 1-5 The Stinger MS+ (front view) ........................................................... 1-7

Figure 1-6 Model B control module interfaces................................................... 1-9

Figure 1-7 The Stinger MS+ (rear view)........................................................... 1-10

Figure 1-8 OC3-ATM trunk module fiber optic connection points .................. 1-11

Figure 1-9 OC12-ATM trunk module fiber optic connection points ................ 1-11

Figure 1-10 DS3-ATM or E3-ATM trunk module connection points................. 1-11

Figure 1-11 TRAM module connection points ................................................... 1-12

Figure 1-12 Fast Ethernet trunk module connection points .............................. 1-12

Figure 2-1 Stinger MS+ chassis models for rack mounting ................................ 2-2

Figure 2-2 LPM 50-pin connector ...................................................................... 2-4

Figure 2-3 Connecting to LPMs in a Stinger MS+ unit ...................................... 2-4

Figure 2-4 Connecting an OC3-ATM trunk module .......................................... 2-5

Figure 2-5 Connecting a DS3-ATM or E3-ATM trunk module .......................... 2-6

Figure 2-6 Stinger MS+ alarm module ............................................................... 2-7

Figure 2-7 Connecting to the alarm input port .................................................. 2-9

Figure 3-1 Connecting the power filters............................................................. 3-2

Figure 3-2 Control module status lights ............................................................. 3-3

Figure 4-1 Example of DSLAM operations......................................................... 4-1

Figure 5-1 Serial management connection to a Stinger MS+............................. 5-2

Figure 5-2 Ethernet connection.......................................................................... 5-3

Figure 5-3 Backup administrative connection with a modem to the

Stinger MS+ unit ............................................................................... 5-4

Figure 5-4 Connection for internal modem........................................................ 5-6

Figure 5-5 Default netmask for class C IP address ............................................ 5-10

Figure 5-6 Local backbone router to be used as default route.......................... 5-13

Figure 6-1 Removing a control module.............................................................. 6-3

Figure 6-2 Installing a control module ............................................................... 6-4

Figure 6-3 Removing an LPM............................................................................. 6-7

Figure 6-4 Replacing the cooling module........................................................... 6-9

Figure 6-5 Replacing a power filter .................................................................. 6-10

Figure 6-6 Replacing an alarm module ............................................................ 6-11

Figure B-1 USOC RJ-21X 50-pin connector ....................................................... B-3

Table des matières

Manuels Châssis populaires d'autres marques

Advantech

Advantech IPC-623 Series Manuel utilisateur

IMC Networks

IMC Networks iMcV/18 Manuel utilisateur

Chenbro

Chenbro RB13804N4WFT Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR665 V3 Manuel utilisateur

Wuntronic

Wuntronic PCI4DRQ Manuel utilisateur

EtherWAN

EtherWAN EMC400 Manuel utilisateur

Overland Storage

Overland Storage SnapSAN S1000 Mode d’emploi

Philips

Philips LC4.1E A Manuel utilisateur

Supermicro

Supermicro SCF418 Series Manuel utilisateur

Chenbro

Chenbro RM437 Series Manuel utilisateur

Pickering

Pickering 40-914 Manuel utilisateur

HP A7503-S Instructions de montage

Supermicro

Supermicro SC823MTQ-R700LPB Manuel utilisateur

SilverStone

SilverStone RMS08 Series Manuel utilisateur

NI cRIO-FRC II Manuel utilisateur

Pickering

Pickering 65-200 Manuel utilisateur

Allied Telesis

Allied Telesis AT-MMCR18 Manuel utilisateur

Hisense

Hisense MSD6586 Manuel utilisateur