Belkin F5U116 Manuel utilisateur

P73277 F5U116

USB Multi-port

Hub

User Manual

Thank you for purchasing the Belkin Components F5U116

Multi-port Hub. This product provides you with the

following ports:

• Four downstream USB ports

• One parallel printer port

• Two RS-232 serial ports

USB has a simple and high-speed interface which makes

adding serial devices and parallel printers almost trivial. No

need to worry about addresses, IRQs, internal cards, slots, or

anything complicated. Just plug it in, install the drivers, and

you’re ready to go.

• Belkin Multi-port Hub

• 6VDC, 2.5A power supply

• USB Device Cable

• Installation CD

• This manual

• Registration card

Introduction

Package Contents

Please read this manual thoroughly in its entirety.

Failure to follow installation and other recommended

procedures may result in irreversible damage to the

product, your computer and/or connected devices.

Product Detail

• PC with one free USB port

• Windows®98/98 Second Edition (SE)

• CD-ROM drive

System Requirements

Hardware Installation

Because USB is hot swappable, you need not power down

your PC.

• Connect the jack of the power adapter and plug it into the

back of the Multi-port Hub

• Find an unused electrical outlet, and plug in the power adapter

• Plug the flat end (A plug) of the USB cable into a free USB

port on your PC

• Plug the square end (B plug) of the USB cable into the USB

upstream connector located on the back of the Multi-port Hub

Windows®will automatically detect the Multi-port Hub and start

installing its drivers. Windows will prompt you for the software.

See the next sections for details on how to install the software.

Before you can install the software, you need to know what

version of Windows®you are using. If you are not sure what

version of Windows®you are running, click on START, select

SETTINGS, click on CONTROL PANEL, then double-click on

SYSTEM. An applet will appear and provide you with your

system’s information.

Software Installation

Software Installation – Windows® 98 and Windows®98

Second Edition (SE)

First, Windows®will automatically detect and install the built-in

"General Purpose USB Hub" for the four downstream USB

ports. You do not need to do anything.

Next, Windows®will detect the two serial ports named

"USB-232 Adapter". You see the following dialog box:

Click on Next.

Software Installation (continued)

At the next prompt, click on Next again so that Windows®

searches for the best driver (recommended):

You must then tell Windows®where to get the drivers. Insert

the CD-ROM in your CD-ROM drive, and click on “Specify a

location”. In the space provided, type “d:\serial\win98” (or

substitute “d:” with the correct drive letter of your CD-ROM

drive). Click on Next.

Software Installation (continued)

Windows®will read the CD-ROM and find the correct drivers.

Click on Next.

Once Windows®has finished copying the drivers, installation for

the first serial port is complete. Click on Finish:

Windows®may prompt you to restart your computer. Because

installation is not yet complete, click No.

Software Installation (continued)

Windows®will continue, and will detect and install the drivers

for the second serial port. Then, Windows®98 will find an

“Unknown Device”. Windows®98 SE will find this device as a

“USB Device”. Click on Next.

At the next prompt, click on Next again so that Windows®

searches for the best driver (recommended):

Software Installation (continued)

You must then tell Windows®where to get the drivers. Make

sure the Installation CD is in your CD-ROM drive, and click on

“Specify a location”. In the space provided, type in

“d:\parallel\win98” (or substitute “d:” with the correct drive

letter of your CD-ROM drive). Click on Next.

Windows®will read the CD-ROM and find the correct drivers.

Click on Next.

Autres manuels pour F5U116

Table des matières

Autres manuels Belkin Changer

Belkin

Belkin F1DJ102PeaB Manuel utilisateur

Belkin

Belkin F1DA108Q Manuel utilisateur

Belkin

Belkin F1DN104K-3 Feuille d'instructions

Belkin

Belkin F5U302 - Wireless USB Hub Manuel utilisateur

Belkin

Belkin F5U303 Manuel utilisateur

Belkin

Belkin F1DG102W - Flip Wireless KVM Manuel utilisateur

Belkin

Belkin Secure DVI-I Manuel utilisateur

Belkin

Belkin OMNIVIEW P72021 Manuel utilisateur

Belkin

Belkin OmniView F1DG102W Manuel utilisateur

Belkin

Belkin WeMo F7C027 Manuel utilisateur

Belkin

Belkin OmniView F1DL102P Manuel utilisateur

Belkin

Belkin OmniView F1DK102P Manuel utilisateur

Belkin

Belkin OmniView Manuel utilisateur

Belkin

Belkin F1DM102U Manuel utilisateur

Belkin

Belkin F1DA208Z Manuel utilisateur

Belkin

Belkin F1DA104Z - OmniView PRO3 USB Manuel utilisateur

Belkin

Belkin OmniView PRO2 Rack Manuel utilisateur

Belkin

Belkin F1DN104P-3 Manuel utilisateur

Belkin

Belkin OmniView PRO3 PS/2 Manuel utilisateur

Belkin

Belkin Switch2 DVI-D Manuel utilisateur

Belkin

Belkin F5U261 Manuel utilisateur

Belkin

Belkin F5U261qea1 Manuel utilisateur

Belkin

Belkin F1DF102P Manuel utilisateur

Belkin

Belkin OmniView F1D5102P Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur