Belkin Wireless Media Desktop 250 Manuel utilisateur
Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Wireless Multimedia
Desktop 250
Wireless Multimedia
Desktop 250
User Manual
F8E859-BNDL
Discover easy Internet and multimedia
functionality with wireless convenience
Keyboard
Mouse
User Manual
Table of Contents
Table of Contents
1. Introduction .........................................................................1
Package Contents ................................................................2
Software Compatibility .........................................................2
2. Quick Setup ..........................................................................3
For PS/2 Connections ..........................................................3
For USB Connections ..........................................................4
3. Software Driver Installation ................................................5
For Windows 98 SE, 2000, Me, and XP ..............................5
4. About your Belkin Software ................................................6
Product Features ..................................................................6
For the Keyboard .................................................................6
For the Mouse ....................................................................10
5. Troubleshooting .................................................................13
6. Information ........................................................................15
1
Congratulations and thank you for purchasing the Wireless
Multimedia Desktop 250 by Belkin. We appreciate your business
and we are sure you will enjoy years of reliable use with these
high-quality input devices.
Although the Wireless Multimedia Desktop 250 will function
out-of-the-box as a Human Interface Device (HID) or standard
PS/2 keyboard and mouse, for advanced programmability and
functionality, we recommend that you use the included software.
This will give you added flexibility and allow you to program and
customize your settings, and reassign keys to fit your preference.
Introduction
1
2
3
4
5
6
7
8
9
10
2
Section
Package Contents
Software Compatibility
Windows® OS
for USB interface:
Windows XP, Me, 2000, 98 SE
Windows OS
for PS/2 interface:
Windows XP, Me, 2000, 98 SE
Wireless
Multimedia
Keyboard
4 AA Batteries
Wireless 5-Button
Optical Mouse
User Manual
USB and PS/2
Receiver
CD Software
Driver
Introduction | Package Contents
PS/2 Adapter
Quick Setup | For PS/2 Connections
3
For PS/2 Connections
1. Be sure that your computer is powered off.
2. Connect the receiver to
your computer’s PS/2
ports. The receiver has a
two-headed connector for
the keyboard and mouse
connection (purple is for
the keyboard and the USB
connection, and the green
adapter is for the mouse).
There is also a diagram on
the top connector for identification. Your computer will either
have a matching color scheme or an illustration next to the
port, or both (See Fig. 1).
3. Install the batteries into your keyboard and mouse. Please
make sure you follow the diagram on the inside of the battery
compartment to ensure that you install them correctly.
4. Power on your computer.
The receiver automatically scans for and synchronizes the
keyboard and mouse when you power on the computer. Your
keyboard and mouse should now be functioning.
NOTE: If synchronizing does not occur automatically, please
refer to the information on “Synchronizing” in the Troubleshooting
section at the end of this User Manual.
Fig. 1
Quick Setup | For USB Connections
1
2
3
4
5
6
7
8
9
10
4
Section
For USB Connections
1. Be sure that your computer is powered on. If you are running
Windows 98 SE, Me, or 2000, you will need to have your old
keyboard and mouse connected during the installation.
2. Install the batteries into your keyboard and mouse. Please
make sure you follow the diagram on the inside of the battery
compartment to ensure that you install them correctly.
3. Connect only the receiver to
your computer with the USB
connector. (Do not connect
the green PS/2 connection as
it is not necessary in a USB
environment) (See Fig. 2).
NOTE: When connecting the USB cable to your computer,
Windows will start a New Hardware Wizard. Windows XP
completes the Wizard automatically. In Windows 98 SE, Me, and
2000, you will need to go through the New Hardware Wizard
setup with your old keyboard and mouse. Windows 98 SE may
require you to insert your Windows 98 SE Installation CD into
your computer’s CD-ROM drive to complete the install.
4. The receiver automatically scans and synchronizes the
keyboard and mouse. Your keyboard and mouse should now
be functioning.
5. If synchronizing does not occur automatically, please refer
to the information on “Synchronizing” in the Troubleshooting
section at the end of this User Manual.
Fig. 2
Software Driver Installation
5
For Windows 98 SE, Me, 2000, and XP
NOTE: The keyboard and mouse should now be functioning
for basic input. If this is not the case, carefully repeat the Quick
Setup procedures in the previous pages. When the keyboard
and mouse are functioning for basic input, install the software
described in the following section.
NOTE: If you have previously installed any keyboard or mouse
driver on your computer, you must uninstall it/them before
proceeding with this installation procedure.
1. Insert your Wireless Multimedia Desktop 250 driver
installation CD into your CD-ROM drive. After a few moments,
the main menu will start automatically.
2. Select “Install Driver” and your computer will begin the
installation process.
3. Follow the on-screen instructions to install the software.
NOTE: If the main CD does not auto-start, click the “Start”
button and select “Run”. From the run dialog box, enter
“<drive>:\Setup.exe” and click “OK” (“<drive>” being the
letter of the drive that identifies your CD-ROM drive under
“My Computer”. For example, if the CD is in drive D, enter
“D:\Setup.exe”.).
4. When prompted, click “Finish” and restart your computer.
This completes the installation process.
6
Section
About your Belkin Software | Product Features
1
2
3
4
5
6
7
8
9
10
Product Features
The Wireless Multimedia Desktop 250 software provides a suite
of tools that will enhance your experience with the Belkin Wireless
Multimedia Desktop 250. It allows you to customize your hot keys
and gives you quick access to your media keys, as well as
other shortcuts.
For the Keyboard
Software installation is required to enable functioning of the
following USB-PS/2 keyboard hot keys:
Mute Mutes your system volume.
Stop In Windows Media Player, stops music.
Play/Pause In Windows Media Player, starts or pauses music.
Back In Windows Media Player, moves you back one
track or to the beginning of the current track.
Forward In Windows Media Player, moves selection
forward one track.
Volume
Up/Down Adjusts the main volume of your computer.
NOTE: Your Media Player may have a separate volume control.
Media Opens your default Media Player for music only.
Search Enables web search.
Refresh Reloads the current web page.
Stop Stops page from loading.
Back Moves Internet page back.
7
Forward Moves Internet page forward.
My
Documents Opens your “My Documents” folder.
Home Opens your system’s default Internet browser.
Email* Opens your default email program, such as
Microsoft Exchange or Outlook.
Calculator Opens your Widows system calculator.
Computer Opens up “My Computer”.
Sleep Puts computer into sleep mode.
Battery LED lights up when batteries are low.
*NOTE: If you have a web-based email account, this feature does
not apply.
To program keyboard hot keys:
1. Click “Start”.
2. Click “Programs”.
3. Click “Belkin Multimedia Keyboard”.
4. Then double-click on “Belkin Multimedia Utility Keyboard”.
5. An on-screen display of the hot keys will appear. Select the
button to program.
6. Then under the “Keys” tab, select “Special Function”.
7. In the drop-down menu, select from:
Copy Paste Open New
Cut Redo Save
About your Belkin Software | For the Keyboard
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Belkin Accessoires informatiques
Belkin
Belkin F4D247 Manuel utilisateur
Belkin
Belkin F8E883UK Manuel utilisateur
Belkin
Belkin F1DC108C-US Manuel utilisateur
Belkin
Belkin USB BusPort F5U005 Manuel utilisateur
Belkin
Belkin F8E860ukBNDL Manuel utilisateur
Belkin
Belkin PT-2002-X Manuel utilisateur
Belkin
Belkin F5U228 Instructions de montage
Belkin
Belkin F8E858-BNDL Manuel utilisateur
Belkin
Belkin F8E211 Manuel utilisateur
Belkin
Belkin F4D153-1 Manuel utilisateur
Belkin
Belkin WIRELESS F8E849-BNDL Manuel utilisateur
Belkin
Belkin F8E832-BNDL Manuel utilisateur
Belkin
Belkin F8V1027 Manuel utilisateur
Belkin
Belkin F8T042ukB Manuel utilisateur
Belkin
Belkin F8T042-B Manuel utilisateur
Belkin
Belkin F8E815 Manuel utilisateur
Belkin
Belkin F1DN001R Manuel utilisateur
Belkin
Belkin F4D517 Manuel utilisateur
Belkin
Belkin 74113 Manuel utilisateur
Belkin
Belkin F4D162-2 Manuel utilisateur
