Rack for containers WD 200 | © Belimed Safety instructions
001 7 | 18
• DIN sterilization containers
• AESCULAP Aicon®sterilization containers
All other applications are considered to be non-intended use.
Use suitable transport carts.
Coordinate the sizes of the sterilization containers and the racks with each other.
Table 2-1 External dimensions and number of sterilization containers
2.4 Warranty
The product must only be installed and commissioned by personnel employed by Belimed AG or per-
sonnel who have been trained by Belimed AG. Belimed AG accepts no responsibility for work per-
formed by personnel neither directly employed by Belimed AG, nor trained by Belimed AG.
No repairs or modifications in or on the product must be carried out by non-authorized personnel.
Unauthorized repairs and modifications exclude any liability of the manufacturer for resulting damage
to the operator and the product. Furthermore, modifications that affect operation may violate local
laws and jeopardize insurance coverage in the event of malfunction.
Repairs and modifications must only be carried out by personnel either directly employed by
Belimed AG or trained by Belimed AG. Improperly executed repairs and modifications can entail con-
siderable danger to both patient and operator; moreover, such actions will void the warranty claim.
Furthermore, no warranty service is provided for defects caused by non-compliance with these in-
structions, improper use or normal wear and tear of the product.
Defective components must only be replaced by original spare parts from Belimed. Only if original
spare parts are used can it be ensured that the spare parts meet safety requirements. If spare parts
are used that neither originate from Belimed AG, nor have not been approved by Belimed AG, the
warranty is rendered void.
2.5 Personnel requirements
The operating facility must ensure that this product is only operated by trained persons.
Operators must have the following knowledge:
• Authorized by the operating facility.
• Responsibilities clearly defined by the operating facility.
• Appropriately trained.
• Thoroughly familiarized with the product.
• Demonstrated required technical expertise.
• Necessary prerequisites and required means to properly execute the tasks.
• Read and understood these instructions in full.
The operating facility clearly defines responsibilities for the operation, inspection, and cleaning work.
The operating facility regularly checks compliance with the responsibilities.
Non-compliance may lead to hazards for patients and operators.
Height [mm] Depth [mm] Width [mm] Sterilization containers
per rack [units]
185 600 300 2
