Behringer HELLBABE HB01 Manuel utilisateur

HELLBABE HB01

Ultimate Wah-Wah Pedal with Optical Control

Thank you for showing your condence in us by purchasing the BEHRINGER HELLBABE HB01. This professional Wah-Wah pedal is

specially designed to provide everything you need for all-style classic and modern sounds. Thanks to its high-performance features

like exible Q control, freely adjustable heel-down frequency range (perfect for use with bass guitars), tunable boost function

and much more you’re armed with a tool for serious musicians yearning for the most up-to-date sounds to add new dimensions to

their creativity.

WHERE TO PUT YOUR WAH-WAH

Most guitar players put their Wah-Wah pedal before time based eects like reverb, anger, chorus, vibrato etc. This assures that the

eects are added to the Wah-Wah sound. Even all kinds of distortion/overdrive eects should be placed before this unit to achieve

best tone results.

1. Controls

(1) This is the pedal of the HB01. The unit will be activated as soon as you put your foot on and move it. By taking your foot from

the pedal the eect will be deactivated. Depending on the timer adjustment (see (10)) the HB01 remains active for a few

seconds after that.

(2) The RANGE control lets you extend the heel-down frequency to match the frequency range of bass guitars for example

(440 Hz to 250 Hz).

(3) The BOOST switch activates the boost function. The output level is then increased - but only if the Wah eect is switched on.

(4) The BOOST control adjusts the level of output boost (max. +15 dB). This control is only active if the BOOST switch is set to ON

(and if the Wah is switched on).

(5) The Qcontrol allows to change the shape of the lter peak. High Q settings (turned to right position) produce a large,

selective lter peak with a high output level. Low Q settings (turned to left position) provide a lower output level with a

subtle, broad lter peak producing less vocal eect.

(6) Turning the FINE control allows to extend the toe-down frequency of the sweep range up to 2.2 kHz.

(7) Use this ¼" TS IN connector to plug in the instrument cable.

(8) The ¼" TS OUT connector sends the eected signal to your amp.

(9) The ¼" TS OUT/BYPASS connector can be used as second output or as bypass, hard wired to the input, to play out the

uneected signal.

(10) The TIMER ADJ control (accessable through a hole in the housing) is needed to adjust the time the eect remains active after

taking your foot from the pedal.

(11) Use the 9 V connection to plug in a 9 V power supply (not included).

(12) The STATUS-LED illuminates when the eect is activated.

(13) The BOOST-LED illuminates when the boost function is activated.

(14) The rocker screw allows to adjust the resistance of the rocker mechanism.

(13) (12) (14)

(1) (3) (5) (6) (8) (9)

(4) (11) (7) (10) (2)

HELLBABE HB01

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS

PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARETHE PROPERTY OFTHEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO

LIABILITY FOR ANY LOSSWHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH

OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH

AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO

AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS

MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND

The BATTERY COMPARTMENT is located at the bottom of the unit. Open the lid to install or replace the 9 V battery.

◊ The HB01 has no on/o switch. As soon as you insert the jack into the IN connector, the HB01 begins running.

When not using the HB01, remove the jack from the IN connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom of the unit.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.

Contact our qualied servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and

conditions of our warranty carefully.

4. Specications

Input

Connector ¼" TS

Impedance 1 MΩ

Output

Connector ¼" TS

Impedance 1 kΩ

Output/Bypass

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V, 100 mA DC regulated

PSU-SB-CN BEHRINGER 220 VAC adaptor China

PSU-SB-EU BEHRINGER 230 VAC adaptor Europe

PSU-SB-JP BEHRINGER 100 VAC adaptor Japan

PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia

PSU-SB-UK BEHRINGER 240 VAC adaptor UK

PSU-SB-UL BEHRINGER 120 VAC adaptor USA

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Dimensions/Weight

Dimensions (H x W x D) 3.8 x 4.7 x 10" / 99 x 120 x 254 mm

Weight 2.6 lbs / 1.2 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may

be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from

those listed or shown.

Autres manuels pour HELLBABE HB01

Table des matières

Autres manuels Behringer Pédale musicale

Behringer

Behringer OVERDRIVE OD400 Manuel utilisateur

Behringer

Behringer BASS OVERDRIVE BOD400 Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Behringer

Behringer BASS OVERDRIVE BOD400 Manuel utilisateur

Behringer

Behringer VINTAGE DELAY VD400 Manuel utilisateur

Behringer

Behringer HELLBABE HB01 Manuel utilisateur

Behringer

Behringer Intelligate IG9 Manuel utilisateur

Behringer

Behringer DIGITAL REVERB/DELAY DR400 Manuel utilisateur

Behringer

Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Manuel utilisateur

Behringer

Behringer SUPER FUZZ SF300 Manuel utilisateur

Behringer

Behringer Vintage tube overdrive TO800 Manuel utilisateur

Behringer

Behringer ULTRA CHORUS UC200 Manuel utilisateur

Behringer

Behringer Ultra Octaver UO300 Manuel utilisateur

Behringer

Behringer PB1000 Manuel utilisateur

Behringer

Behringer VINTAGE BASS VB1 Manuel utilisateur

Behringer

Behringer ULTRA METAL UM100 Manuel utilisateur

Behringer

Behringer DYNAMIC WAH DW400 Manuel utilisateur

Behringer

Behringer Digital Multi-FX FX600 Manuel utilisateur

Behringer

Behringer ULTRA TREMOLO UT100 Manuel utilisateur

Behringer

Behringer MIDI FOOT CONTROLLER FCB1010 Manuel utilisateur

Behringer

Behringer ULTRA DISTORTION UD300 Manuel utilisateur

Behringer

Behringer DC9 Manuel utilisateur

Behringer

Behringer ULTRA TREMOLO/PAN TP300 Manuel utilisateur

Behringer

Behringer Digital Multi-FX FX600 Manuel utilisateur

Manuels Pédale musicale populaires d'autres marques

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

BYOC

BYOC Analog Chorus Manuel

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur

TREX

TREX ToneBug Totenschläger Manuel utilisateur

BBE

BBE ORANGE SQUASH Manuel utilisateur