Beghelli BBX-SE Manuel utilisateur

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Beghelli Équipement d'éclairage

Beghelli

Beghelli Stella Exit Manuel utilisateur

Beghelli

Beghelli SR Manuel utilisateur

Beghelli

Beghelli Formula 65 LED Manuel utilisateur

Beghelli

Beghelli GDE Combo Manuel utilisateur

Beghelli

Beghelli Fortezza Combo RM Manuel utilisateur

Beghelli

Beghelli Salvalavista LED Manuel utilisateur

Beghelli

Beghelli Tempesta Manuel utilisateur

Beghelli

Beghelli Cyclone Manuel utilisateur

Beghelli

Beghelli MEZZO Manuel utilisateur

Beghelli

Beghelli Esco Unit Manuel utilisateur

Beghelli

Beghelli Sicura Unit Manuel utilisateur

Beghelli

Beghelli STELLA EXIT Manuel utilisateur

Beghelli

Beghelli OTTICA B6L Manuel utilisateur

Beghelli

Beghelli GDE-SP Manuel utilisateur

Beghelli

Beghelli Lyra W LED Manuel utilisateur

Beghelli

Beghelli Protegga Manuel utilisateur

Beghelli

Beghelli METRica LED L LG 230 Manuel utilisateur

Beghelli

Beghelli Maxima Manuel utilisateur

Beghelli

Beghelli Nova Eco Manuel utilisateur

Beghelli

Beghelli IP42 Manuel utilisateur

Beghelli

Beghelli Sicura Manuel utilisateur

Beghelli

Beghelli WLX Manuel utilisateur

Beghelli

Beghelli PACO-T20 Manuel utilisateur

Beghelli

Beghelli LOGICA LED LG FM Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur

BBX-SE

BBX-SE-HO

Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600

9/16/22

One blink ON/pause (4 seconds) Battery is not connected

Two blinks ON/pause (4 seconds) Battery is shorted or battery voltage drops below acceptable level

Three blinks ON/pause (4 seconds) Charger board circuit fault

Four blinks ON/pause (4 seconds) Transfer circuit fault

Five blinks ON/pause (4 seconds) Emergency lamp fault

Six blinks ON/pause (4 seconds) Remote head’s emergency lamp fault (if installed)

3. For manual test, press test button as follows:

Press test button once (within 2 seconds) 30 seconds test

Press test button twice (within 2 seconds) 3 minutes test

Press test button 3 times (within 2 seconds) 30 minutes test

Press test button 4 times (within 2 seconds) 90 minutes test

1.Install the BBX/ BBX-HO according to the installation instructions.

2. When AC power is supplied to fixture, the unit will automatically initiate a self-test with self-

diagnostics that will do the following:

(1) Monitor for faults with battery, charger board, lamps and transfer circuit every 5 seconds.

(2) Perform a three-minute self-test every month.

(3) Perform a 90-minute self-test every 12 months starting in the 12th month after installation.

Note: ALL functions are factory pre-set (does not need field adjustment).

3. Dual color LED lamp indicator shows the following status:

(1) Green color: ON/ Ready

Blinking: Testing

(2) Red color: Service Alert

Blinking: Sequence below determines service required

TO RESET:

After resolving the fault of emergency equipment, press test button for 2seconds without releasing

to reset. LED indicator will show green.

Page 1 of 2

BBX-SE

BBX-SE-HO

Page 2of 2

Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600

04/21/22

4. Autotest of Remote Lamps (when applicable):

In order to connect remote lamp heads to Autotest circuit, follow these instructions.

(1) Remove ground male connector from the

female connector.

(2) Plug the remote male connector into the

female connector.

(3) Connect extended remote head wires to

the remote wires using wire nuts. Yellow

is positive(+) and Purple is negative(-).

WARNING

1) Make sure that power is off before making any electrical connections!!

2) Unused wires must be capped using wire nuts.

AC INPUT

White Neutral

Black 120-277VAC

Integral

LED Head

Remote Heads

(Option)

Battery

Ground