Beevision BeeVision 272 Manuel utilisateur

BeeVision 272

Version 1.3.2

USER

MANUAL

CONTENTS

1. Preface ................................................................................... 2

2. Description of The Product and Intended Use ...................... 4

2.1 Important Information ........................................................ 4

3. General Information .............................................................. 5

3.1 Overall Dimensions .............................................................. 5

3.2 Main Parts ........................................................................... 5

4. Using the Device .................................................................... 8

4.1 Turning On/Off .................................................................... 8

4.2 Measurement Area .............................................................. 9

4.3 Volumizer .......................................................................... 10

4.4 Calibration ......................................................................... 16

4.5 Operation .......................................................................... 20

1. Preface

This document describes the usage of the BeeVision 272

dimensioning system. Permission must be obtained from 3DTİM

Elektronik A.Ş. (3DTIM) to copy, reprint and translate this document

in whole or in part. This manual may not be published, in whole or in

part, or used without authorization for competitive purposes. 3DTIM

reserves the right to make technical changes for improvement.

BeeVision 272 can only be used for dimensioning measurements

of opaque pallets and objects with a maximum size of 2400 x 2400 x

2400 mm (WxDxH). Any use other than this purpose is deemed illegal

and constitutes a misuse of the machine. If it is used in this way, all

responsibility will be on the user.

BeeVision 272 is under warranty for 1 year. Malfunctions

resulting from user error or the use of the device not in accordance

with the user manual are not covered by the warranty.

Figure 1.1

Figure 1.2

2. Description of The Product

and Intended Use

BeeVision 272 is an industrial product used for object

dimensioning. It is designed for measuring the dimensions of opaque

pallets and objects with a maximum size of 2400 x 2400 x 2400 mm

(WxDxH). The total weight of BeeVision 272 is 27 kg.

BeeVision 272 will not function correctly in direct

sunlight. It is designed for indoor usage.

2.1 Important Information

• The maximum object size is 2400 x 2400 x 2400 mm

(WxDxH).

• The minimum object size is 300 x 300 x 300 mm (WxDxH).

• The device may not measure accurately outside the 0-40°C

temperature range.

• The fans in the units turn on and off depending on the

ambient temperature.

• BeeVision 272 cannot measure transparent objects such as

glass, plastic, or nylon.

• A monitor should be connected to BeeVision 272 for

calibration and usage.

3. General Information

3.1 Overall Dimensions

The dimensions of the BeeVision 272 are 2740 x 375 x

405mm (WxDxH). The specified dimensions are shown in Figure 3.1

below (units are in mm).

Figure 3.1

3.2 Main Parts

Camera Unit: There are 2 camera units located at both ends of the

device. Cameras capture 2- and 3-dimensional images from both

corners.

Mounting Brackets: Brackets allow the user to mount the device on

walls or ceilings. The distance between the device and measurement

surface is important, please refer to the installation manual for the

correct installation.

Sigma Profiles: There are 2 sigma profiles on which Camera Units and

Processor are mounted on.

Processor: Processor collects data from Camera Units and runs the

measurement software.

Wireless Antenna: Antenna is used for Wi-Fi connection.

Connectors:

1. POWER MAIN: This port is the main power port of the device.

2. ETHERNET: You can use this port to connect an ethernet

cable.

3. USB OUT: You can use this port to connect a USB cable.

4. USB DISP: USB port for touch screen operation of the

monitor.

5. HDMI DISP: Video output for the monitor.

6. POWER DISP: Power output for the Monitor.

7. USB BARCODE: USB connection for the handheld barcode

reader.

8. SERIAL: RS232 connection for the scale.

9. USB H1: Data port for the Camera Unit 1.

10. USB H2: Data input for the Camera Unit 2.

If you are going to add a monitor to your system, you

should use the HDMI Display port, and if the monitor

is touchscreen, you should use the USB Disp Port. If

you are going to use a 12V Monitor, don’t use the

Power Disp Port. You can supply power by simply

plugging it into any socket with the adapter.

The +12V input of the power_main and power_disp

connectors is the left pin when viewed from the

back of the processor head.

Figure 3.2

11. POWER H1: Power port for the Camera Unit 1.

12. POWER H2: Power port for the Camera Unit 2.

Figure 3.3

4. Using the Device

4.1 Turning On/Off

When the power cord is inserted into the power port and

given mains voltage, the system will be ready for use. The input

mains voltage BeeVision dimensioner must be at an interval between

100V-240V and 50Hz-60Hz.

To turn off the device, simply unplug the power cord.

The mouse cursor is by default hidden in Volumizer UI. If you

would like to connect a mouse and a keyboard, you can

enable/disable the mouse cursor with Ctrl+Shift+M combinations on

your keyboard.

Please refer to the Software Guide for more

details on how to integrate BeeVision into your

system.

4.2 Measurement Area

There are two Camera Units at both ends of the device. The

field of view of these cameras is shown in Figure 1.1. For the device

to measure an object, the object must be placed on a flat surface that

was used for calibration.

Figure 4.1

For maximum measurement accuracy, you must

mount the components in the positions shown in

the installation manual.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels beevision Instrument de mesure

beevision

beevision 270 Manuel utilisateur

beevision

beevision 183 Manuel utilisateur

beevision

beevision 182S Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

beevision BeeVision 272 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques