12 13
To take pictures with your BearDevil, flick the Video/
Photo Switch to Photo Mode and turn the BearDevil on.
Shortly press the Power/Shutter Button to start and stop
taking photos. The BearDevil will take a photo every 3 seconds, the red light
flashing to indicate it is doing so. Your BearDevil will vibrate once when the
recording is starting and three times when it stops.
Recording HD Video
To record HD video with your BearDevil, flick the Video/
Photo Switch to Video Mode and turn the BearDevil on.
Shortly press the Power/Shutter Button to start and stop
recording. The red light will flash while the BearDevil is
recording. Your BearDevil will vibrate once when the recording
is starting and three times when it stops.
Taking Pictures
The battery in your BearDevil is designed to fit tightly in
order to maximize reliability during rough activities. To
remove the battery, pull it out with the battery holder.
It is intentionally not easy to do, but the battery will come out. Have faith!
Additional batteries and accessories are available at
www.BearDevil.com
Removing the Battery
Going Under Water?
To keep your BearDevil waterproof, make sure the O-rings
are always sufficiently greased with the silicon grease,
and the rear cap is screwed on tight.
*
Rubber O-ring
with silicon grease
This cow represents
the Rear Cap
This guy
represents your
BearDevil Red
EN
