Prologue - 3
Prologue
Thank you for buying Beamex ePG, Electric Pressure Pump and
Controller.
Beamex ePG is a portable, hand-held, battery-powered device that is used
to generate reference pressure in pressure calibration applications. With
ePG you can generate pressure between -0.85 to 20 bar / -12.4 to 300
psi. Since the device does not have a display to indicate the generated
pressure reading, it must be connected to an external pressure device
with an appropriate display, e.g. Beamex pressure calibrator or a pressure
indicator. ePG contains a lithium-ion battery pack that can be charged
using a USB Type-C charger either separately or while attached to the
device (see chapter Battery Pack).
Typographical Conventions
The following typographical conventions apply to the ePG User Manual:
Bold text is used in following situations:
• References to User Manual topics and parts
• ePG keywords, i.e. terms shown in the User Interface and
Note: This is a note. Notes typically inform you of something
useful concerning the current topic.
Caution: This is a caution. Whenever you see a caution, read
it carefully and take it seriously. By not observing cautions, you
may damage the pump.
Warning: This is a warning. Whenever you see a warning, read
it carefully and take it seriously. By not observing warnings, you
may -at worst- damage the pump and/or get personal injury.
Unpacking and Inspection
At the factory, each new ePG passes a careful inspection. It should be
free of scrapes and scratches and in proper operation condition upon
receipt. The receiver should, however, inspect the unit for any damage
that may have occurred during transportation. If there are signs of obvious
mechanical damage, package contents are incomplete, or ePG does not
