BE AC708RB Manuel utilisateur
operation manual
AC708RB
AC658HB
CAUTION READ THIS MANUAL CAREFULLY before operating or servicing this
air compressor, to familiarize yourself with the proper safety, operation, and standard
operating procedures of this unit. FAILURE TO COMPLY WITH INSTRUCTIONS IN
THIS MANUAL COULD RESULT IN THE VOIDING OF YOUR WARRANTY, AND
PERSONAL INJURY, AND/OR PROPERTY DAMAGE. THE MANUFACTURER
OF THIS AIR COMPRESSOR WILL NOT BE LIABLE FOR ANY DAMAGE
BECAUSE OF FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL.
By following the instructions and recommendations in this manual you will ensure a
longer and safer service life of your air compressor.
2
table of contents
Introduction
4 Using the Operators Manual
Specifications
4 Specifications
Product Identification
5 Record Identification Numbers
Safety
6 Safety Instructions
7 Safety Rules
7 Hazard Symbols and Meanings
10 General Safety Information
Safety & Installation
11 Spraying Precautions
11 Hose Precautions
11 Installation and Location
11 Extension Cords
Assembly Instructions
12 Assembly
Product Features
13 Automatic ON/OFF
13 Regulator
13 Tank Pressure Gauge
13 Safety Valve
13 Tank Drain Fitting
13 Safety Guard
3
table of contents
Operating Instructions
14 Initial Start Up
14 Start Up
14 Storage
14 Shut Down
Maintenance
15 When performing any maintenance or service
15 Daily
15 Weekly
15 Monthly
15 Six Months or 250 Operating Hours
15 Oil Change
Troubleshooting
16 Troubleshooting Chart
Parts
17 Parts Diagram
18 Parts List
4
Using the Operator’s manual
Thank you for choosing our compressor. The manual gives information
with respect to operation and maintenance of the Compressor and be
sure to read it carefully first before operation.
Following the manual can ensure the user’s safety and get the best
results from the compressor. All information and diagrams in this manual
are in accordance with the newest products at the publishing time. We
strive for accuracy and this manual is accurate for the models described
at the time of printing. We reserve the right to make improvements or
changes at any time without notice or obligation.
Please keep this manual with the engine permanently, even if the engine
ownership is transferred.
Attention: Read through the complete manual
prior to the initial use of your compressor.
introduction
SPECIFICATIONS AC708RB
· 10 Gallon = 2 x 5 Tank Design
· Oil Lubricated for Extended Durability
· 210cc, 4 stroke, OHV gas engine
· Air Delivery: 13.8 CFM output @ 90 PSI and 12.7 CFM output @ 100 PSI
· Maximum Pressure: 125 PSI
· High Flow regulator and Dual Pressure Gauges for Precision Air Flow
Control
SPECIFICATIONS AC658HB
· 10 Gallon = 2 x 5 Tank Design
· Oil Lubricated for Extended Durability
· 196cc, 4 stroke, OHV gas engine
· Air Delivery: 13.8 CFM output @ 90 PSI and 12.7 CFM output @ 100 PSI
· Maximum Pressure: 125 PSI
· High Flow regulator and Dual Pressure Gauges for Precision Air Flow
Control
Specifications
5
product identification
Record Identification Numbers
COMPRESSOR
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the
product model and identification numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number:
6
safety
Safety Instructions
· Carefully read through the entire owners manual before operating this
compressor.
· Keep manual with important records for safety instructions, operating
procedures and warranty.
· After unpacking your new air compressor, please inspect it carefully for
any damage that may have occurred during transit.
· Do not operate this air compressor if damaged during shipment,
handling or misuse.
· Damage may result in bursting, which can cause serious injury or
property damage.
· All damaged parts must be repaired or replaced as needed prior to
operating this air compressor.
· Check to see that all nuts, bolts and fittings are secure.
· Check to see that the proper lubrication oil, which has been included
with the air compressor, is used to fill the compressor crankcase to the
proper level.
· Please contact our customer service department at the numbers listed
on the back of this instruction manual for any questions or comments
regarding this air compressor.
7
The safety alert symbol ( ) is used with a signal word (DANGER,
CAUTION, WARNING), a pictorial and/or a safety message to alert
you to hazards.
DANGER indicates a hazard which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazard which, if not avoided, could result in
death or serious injury.
CAUTION indicates a hazard which, if not avoided, might result in
minor or moderate injury.
NOTICE indicates a situation that could result in equipment damage.
Follow safety messages to avoid or reduce the risk of injury or
death.
HAZARD SYMBOLS AND MEANINGS
Save these Instructions
SAFETY RULES
safety
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey
all safety messages that follow this symbol to
avoid possible injury or death.
explosion
kickback
fall fluid injection moving parts read manual
hot surface wear eye
protection
slippery
fire electric shock toxic fumes
8
safety
WARNING
AIR TANK WARNING: Drain liquid from air tank daily,
or after each use, using the drain valve located on the
bottom of the lower air tank. Failure to properly drain
liquid from the tank will cause rust from moisture build-
up, which weakens the tank and could lead to a violent
tank explosion, Periodically inspect the tanks for unsafe
conditions such as corrosion.
Never attempt to repair or make modifications to the tank or its at-
tachments. Welding, drilling or any other modifications may weaken
the tank, which may result in damage from rupture or explosion. Never
remove or attempt to adjust the pressure switch, safety valve, or other
factory set operating pressures.
WARNING
FIRE WARNING: Avoid dangerous environments. Do
not use compressor near gasoline or other flammable
materials. Keep work area well lit. Normal sparking of
a motor or sparking from grinding metal could ignite
fumes. Do not spray flammable materials in the vicinity
of an open flame or other ignition source, including the
air compressor itself. Do not direct paint or other spray
material towards the compressor.
Read and follow all safely instructions for the material you are spray-
ing. Be sure to use an approved respirator designed for use with your
specific application.
WARNING
BREATHABLE AIR WARNING: This air compressor in
not designed, nor intended for the supply of breathable
quality air. Air produced by this unit may contain carbon
monoxide or other toxic vapors.
Do not inhale air from the compressor or from a breathing device con-
nected to it.
9
safety
WARNING
AIR TOOLS AND ACCESSORIES WARNING: Do
not exceed the pressure rating of any air tools, spray
guns, air accessories, or inflatables. Excess pressure
can cause them to explode, resulting in serious injury.
Follow the manufacturers recommended pressure set-
tings for all air tools and air accessories.
WARNING
Do not direct compressed air stream at people or pets.
The powerful compressed air stream can damage
exposed skin and easily propel loose dirt and other
small objects. Always wear eye protection that meets
ANSI Z28.1 specifications.
WARNING
Keep hands and fingers away from exposed metal parts
on a running air compressor. Air compressors gener-
ate significant heat during normal operation, which can
cause serious burns. The compressor will remain hot for
some time after operation and should not be touched or
moved until cool.
10
safety
GENERAL SAFETY INFORMATION
Do not operate unit if damaged during shipping, handling or use. Damage
may result in bursting and cause injury or property damage.
Since the air compressor and other components (filters, lubricators,
hoses, etc.) used, make up a high pressure pumping system, the
following safety precautions must be observed at all times:
1. Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
2. Follow all local electrical and safety codes
3. Only persons well acquainted with these rules of safe operation
should be allowed to use the compressor.
4. Keep visitors away and NEVER allow children in the work area.
5. Wear safety glasses and use hearing protection when operating the
pump or unit.
6. Do not stand on or use the pump or unit as a handhold.
7. Before each use, inspect compressed air system and electrical
components for signs of damage, deterioration, weakness or leakage.
Repair or replace defective items before using.
8. Check all fasteners at frequent intervals for proper tightness.
WARNING
Compressor parts may be hot even if the unit is
stopped.
9. Keep fingers away from a running compressor; fast moving and hot
parts will cause injury and/or burns.
10. If the equipment should start to abnormally vibrate, STOP the engine/
motor and check immediately for the cause. Vibration is generally a
warning of trouble.
11. To reduce fire hazard, keep engine/motor exterior free of oil, solvent,
or excessive grease. Never remove or attempt to adjust safety valve.
Keep safety valve free from paint and other accumulations.
12. Never attempt to repair or modify a tank! Welding, drilling or any
other modification will weaken the tank resulting in damage from
rupture or explosion. Always replace worn or damaged tanks. Drain
liquid from tank daily.
13. Tanks rust from moisture build-up, which weakens the tank. Make
sure to drain tank daily and inspect periodically for unsafe conditions
such as rust formation and corrosion.
14. Fast moving air will stir up dust and debris which may be harmful.
Release air slowly when draining moisture or depressurizing the
compressor system.
Autres manuels pour AC708RB
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BE Compresseur d'air
BE
BE AC5060B Manuel utilisateur
BE
BE AC205 Manuel utilisateur
BE
BE AC708RB Manuel utilisateur
BE
BE AC138HEG2 Manuel utilisateur
BE
BE AC5161B Manuel utilisateur
BE
BE AC3220B Manuel utilisateur
BE
BE AC2020 Manuel utilisateur
BE
BE AC206 Manuel utilisateur
BE
BE AC930HB Manuel utilisateur
BE
BE AC205X Manuel utilisateur
Manuels Compresseur d'air populaires d'autres marques
Campbell Hausfeld
Campbell Hausfeld RP3300 Guide de démarrage rapide
Ingersoll-Rand
Ingersoll-Rand UP6 20 HP Manuel utilisateur
Hitachi
Hitachi EC99S Manuel de l'opérateur
Parkside
Parkside PKO 270 A1 Manuel utilisateur
Sullair
Sullair 185 Manuel utilisateur
Clas Ohlson
Clas Ohlson QIE-ZTH-15 Manuel utilisateur
