4
12345
SELECT
R2R1
12345
SELECT
R2R1
2x
4x
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+
3V
LITHIUM
CR 2032
+
3V
Designed in Switzerland / Made in EU
BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
7Standard operation
9Technical data
7.1 Receiver LED indicators
7.2 Warning indicator for low battery voltage
Object
detected
LED off
Wicket doors
open
LED off
LED 1 LED 2
Signal emitted with each activation of the transmitter
Receiver
Supply voltage 12/24 V ACDC
Transmitter memory 7 + 7
Output 2 relays 24 V, 0.5 A; micro switch-off 1B
Power consumption 0.5 W @ 12 V; 1.2 W @ 24 V
Test signal input 12/24 VACDC
Protection class IEC 60529 IP55
Transmitter 1
Battery power 2 x Lithium 3 V type CR2032
Power consumption Transmitting: 17 mA standby: 16 µA
Protection class IEC 60529 IP55
Safety OK Wicket doors
closed
LED on LED on
Battery voltage
low
System
Frequency bands 868.95 MHz & 869.85 MHz
Range Under optimum conditions up to 100 m
Pollution degree 2
Working temperature -20 °C to +55 °C
Transmitter 2
Battery power 2 x Lithium 3 V type CR2032
Power consumption Transmitting: 17 mA standby: 16 µA
Protection class IEC 60529 IP65
6.2 Transmitter reset (Deletion of transmitter-receiver pairing)
6.3 Memory full
Press button Hold down button Short beepsBeep WaitRelease button
10 sec.
> 1.5 sec. > 3 sec.
2 beeps
On the receiver Memory cleared
on all trans-
mitters
BeepBeep Beep BeepBeep
Beep
Beep 10 sec.
8Alternative installation with double sided tape (not supplied)
Caution!
Ensure surfaces are clean, dry and free of dust and grease.
View of transmitter 2
(bottom) Double-sided
adhesive tape
6.4 Battery change
10 EU Declaration of Conformity
12 Contact
See attachment
11 WEEE
Devices with this symbol must be treated separately during
disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal,
processing and recycling of electrical and electronic equip-
ment.
