1. Site Layout
lChoose a clear and level site.
lClearly mark the corners of the rectangle to
be covered by the tent.
lCheck that the diagonals are approximately
the same.
2. Position Corner Pegs
lSet out two wall poles on each corner square
with the rectangle.
lPosition each corner peg inside the 90°angle
described by the wall poles.
lUse your shoe as a measuring guide.
3. Drive Corner Pegs
Ensure each corner peg is fully driven as shown.
4. Layout remaining wall poles and drive
remaining tent pegs.
8. Stand all the remaining wall poles and
loosely tie off the guy ropes.
5. Spread roof out to cover marked rectangle. 6. Stand first wall pole, placing the bottom of
the pole on the corner mark.
7. Tension corner guys until corner pole is
more or less upright.
