BayTech BayTech DS62 Manuel utilisateur

DS Series Manual

DATA SWITCH

DS62 Host Ethernet Module

DS62-MD4 Host Ethernet-Modem Module

BayTech Manual Publication

Revision: May 2008

DS62-Network, DS62-MD4 Network/Modem Host Module

BayTech, is a registered trademarks of Bay Technical Associates, Inc.

Windows 2000®, Windows XP® are products and registered trademark of Microsoft

Corporation.

Tera Term is a product and registered trademark of Vector, Inc.

DS62-Network, DS62-MD4 Network/Modem Host Module

ABOUT THIS OWNER’S MANUAL........................................................................................................5

Connection Description.......................................................................................................................6

EIA-232 SERIAL CONNECTION.....................................................................................................6

Internal MODEM CONNECTION.....................................................................................................6

10/100 BASE-T NETWORK PORT CONNECTION........................................................................6

Installation...............................................................................................................................................6

Power..................................................................................................................................................7

QUICK START: HOST Module...............................................................................................................7

Serial Setup.........................................................................................................................................8

Attention Character........................................................................................................................10

Login Setup Menu .........................................................................................................................10

Network Port Configuration ...........................................................................................................11

Cabling .................................................................................................................................................12

RJ-45 Cables and Adapters..............................................................................................................12

Adapters............................................................................................................................................13

Detail Operations and Configurations...................................................................................................14

Main Screen..........................................................................................................................................14

Unit Configuration Menu.......................................................................................................................15

Configuration Status..........................................................................................................................15

Serial Port Configuration...................................................................................................................17

Handshaking..................................................................................................................................17

Baud Rate......................................................................................................................................18

Word Size......................................................................................................................................18

Stop Bits........................................................................................................................................19

Parity .............................................................................................................................................19

RTS/DTR Line Driver Inactivity State............................................................................................19

Serial Port Device Name...................................................................................................................20

Attention Character...........................................................................................................................20

Disconnect Timeguard......................................................................................................................20

Connect Port ID Echo .......................................................................................................................20

Login Setup Menu.............................................................................................................................21

Access Control ..............................................................................................................................21

Manage Users...............................................................................................................................21

ADD User...................................................................................................................................22

Change User’s Port Access and Password...............................................................................22

Delete User................................................................................................................................24

Direct Port Connection ..................................................................................................................24

Radius Configuration.....................................................................................................................24

TACACS Configuration..................................................................................................................25

Network Port Configuration...............................................................................................................27

IP Address.....................................................................................................................................28

Subnet Mask..................................................................................................................................28

Gateway Address..........................................................................................................................29

Inactivity Timeout...........................................................................................................................29

Carriage Return Translation..........................................................................................................29

Break Length.................................................................................................................................29

DHCP/Telnet/SSH.........................................................................................................................30

SSH Host Key Generation.............................................................................................................30

SNMP Configuration......................................................................................................................32

Read/Write Community String: ..................................................................................................33

Web Server Configuration.............................................................................................................34

Module Name....................................................................................................................................35

DS62-Network, DS62-MD4 Network/Modem Host Module

DS Management...............................................................................................................................35

Internal Alarm Threshold...............................................................................................................35

External Alarm Threshold..............................................................................................................36

Outlet Groups................................................................................................................................37

Firmware / Config Download.............................................................................................................39

Enable Firmware Upgrade.............................................................................................................39

Enable SSL Cert Upload ...............................................................................................................40

Enable Configuration File Upload..................................................................................................40

Restore Configuration Defaults .....................................................................................................41

Get Current Configuration File.......................................................................................................41

Display Configuration Error Log ....................................................................................................42

DS62-MD4 Modem Configuration Menu...........................................................................................42

Modem Port Configuration.............................................................................................................42

Rings to Auto Answer....................................................................................................................44

Modem Connectivity Timeout........................................................................................................44

Modem Inactivity Timeout..............................................................................................................44

Modem Device Name....................................................................................................................44

Status Menu..........................................................................................................................................45

Overall System Status.......................................................................................................................45

Network Status..................................................................................................................................45

Logged Users....................................................................................................................................46

Memory Usage..................................................................................................................................46

Current Routing Cache .....................................................................................................................46

Route Setup......................................................................................................................................47

Processes .........................................................................................................................................47

UnitInfo Database .............................................................................................................................48

Unit Reset.............................................................................................................................................48

Logout...................................................................................................................................................48

Troubleshooting:...................................................................................................................................49

Functional Solutions:.........................................................................................................................49

DS62 and DS62-MD4 Reset procedure............................................................................................50

BayTech Product Warranty...............................................................................................................51

Technical Support.............................................................................................................................52

Return Authorization Process: ..........................................................................................................53

DS62-Network, DS62-MD4 Network/Modem Host Module

ABOUT THIS OWNER’S MANUAL

This document is applicable to the DS62 Network Module and the DS62-MD4 Network/Modem

Module EXCEPT those paragraphs specifically mentioning the DS62-MD4 do not apply to the

DS62. This document provides information required for installing and operating your Bay Tech

equipment. It should allow the user to connect to, power up, and access an applications menu where

peripheral equipment can be controlled. We recommend reading this manual carefully, while placing

special emphasis on correct cabling and configuration. If you have any problems with your installation,

please contact a BayTech Applications Engineer at 228-563-7334, or toll free from anywhere in the

United States using 1-800-523-2702 or contact us at our Web Site, www.baytech.net.

BayTech manufactures many remote site management products, data switches, and remote power

controllers. If you would like information on any of these products, please contact BayTech Customer

Service at the above numbers or visit our web site.

Conventions used in this manual include:

CAUTION: This term is used to denote any condition that could possibly result in physical

harm to personnel or damage to equipment.

IMPORTANT: This term is used to denote conditions that could result in the loss of

communications or to highlight the proper functioning of equipment.

NOTE: This term is used to denote items of interest to the user.

<cr>: Carriage Return or ENTER

The information in this document is subject to change without notice. The statements, configurations,

technical data, and recommendations in this document are believed to be accurate and reliable, but are

presented without express or implied warranty. Users must take full responsibility for their applications

of any products specified in this document. The information in this document is proprietary to Bay

Technical Associates, Inc.

In the interest of improving internal design, operational function, and/or reliability, Bay Technical

Associates, Inc reserves the right to make changes to the products described in this document without

notice.

Bay Technical Associates, Inc does not assume any liability that may occur due to the use or

application of the product(s) or circuit layout(s) described herein.

BayTech units are in accordance with the general requirements of Standard for Information

Technology Equipment (ETL listed, conforms to ANSI/UL STD 60950-1-2003 CERTIFIED

CAN/CSA C22.2 NO. 60950-1-03, UL STD 231 8TH EDITION, UL STD 1950 3RD EDITION

CERTIFIED CAN/CSA 22.2 NO. 950-95, CE conforms to IEC 60950-1).

We welcome any comments you may have about our products, and we hope that you will continue to

look to BayTech for your remote management needs.

DS62-Network, DS62-MD4 Network/Modem Host Module

Connection Description

BayTech's host communication module provides an interface that controls user access to the DS Series

data switch and other DS Series connected modules.

EIA-232 SERIAL CONNECTION

The DS-Series host communications modules have an RJ-45 port which uses an 8-pin crossed modular

cable to connect to a local EIA-232 device such as a computer terminal or external modem. Most serial

computers do not have RJ-45 connections; therefore an adapter is provided with this unit to convert

from a DE-9 connector to an RJ-45 connector (Bay Tech Part No. 9FRJ45PC-4). An adapter to convert

from a DB-25 connector to an RJ-45 connector is also available from Bay Tech, upon request (Bay

Tech Part No. 25FRJ45PC-4). The 8-pin crossed modular cable is configured to operate with these

adapters.

Internal MODEM CONNECTION

A Flash upgradeable 56 Kbps (V.90bis) modem allows standard dial-up telephone lines to be used

between the Data Switch installation and the user's location.

IMPORTANT: The DS62-MD4 modem option has priority over the EIA-232 serial port. If a serial

port user is in configuration mode or connected to a DS74 I/O port when a modem connection is

established, the serial port user will be “booted” off, allowing the remote user to communicate with the

DS unit. Using the RJ04X007 (RJ-11) modular cable, connect to “LINE” on the DS62-MD4 module to

the Telco wall jack. Using communications software, dial the modem using the ATDT command.

10/100 BASE-T NETWORK PORT CONNECTION

Using a straight 10/100 Base-T cable, connect the RJ-45 port labeled ETHERNET on the HOST

module to an RJ-45 port on the network hub. The LINK (link integrity) LED, located on the front

panel of the HOST, illuminates when a good connection is established between the HOST and the hub.

Installation

UNPACKING

Compare the unit and serial number of the equipment you received to the packing slip located on the

outside of the box. Inspect equipment carefully for damage that may have occurred in shipment. If

there is damage to the equipment or if materials are missing, contact BayTech technical support at 228-

563-7334 or call toll free inside the United States at 800-523-2702. At a minimum, you should receive

the following:

1. The Host Module and DS74 Modules.

2. Manual insert describing the location of the User’s Guide on BayTech’s website at

www.baytech.net.

3. Power Cords that may be attached to the unit (if order requested detachable cords).

4. 1 ea. DE-9 (9 pin) PC com port adapter -- 9FRJ45PC (with Cisco Interface) or 9FRJ45PC-1.

5. 1 ea. RJ-45 Roll over cable -- RJ08X007.

NOTE: Keep the shipping container and packing material in the event future shipment is

required.

DS62-Network, DS62-MD4 Network/Modem Host Module

PREPARING THE INSTALLATION SITE

The installation area should be clean and free of extreme temperatures and humidity. Allow sufficient

space behind the DS unit for cabling and receptacle connections. Access to installation site should be

restricted to authorized personnel. Installation of these units should be limited to ITE and Telco server

environments.

Power

CAUTION: This unit is intended for indoor use only. Do not install near water or expose this

unit to moisture. To prevent heat buildup, do not coil the power cord when in use. Do not use

extension cords. Do not attempt to make any internal changes to the power source. Do not

attempt to modify any portion or component of a DS-Series Data Switch unless specifically

directed to; as in Appendix E of this manual. BayTech must perform any internal changes.

CAUTION: High-voltage surges and spikes can damage this equipment. To protect from such

power surges and spikes, this unit must have a good earth ground. A grounding screw

connection is located near the power switch on the back of the unit.

CAUTION: Before removing or replacing any modules, turn off main power switch located on

the DS-Series Base Unit. Communication to the DS-Series Data Switch will be disrupted while

power is off.

CAUTION: For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible

disconnect device (Circuit Breaker rated not to exceed the amperage rating of the unit) shall be

incorporated in the fixed wiring between the power source and the Baytech unit. For

PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and easily

accessible and shall provide back up protection against over current and short circuit by

suitable rated protective devices

not to exceed the AC current rating for the selected model

QUICK START: HOST Module

by Bay Technical Associates

For those Administrators who have requested the bare minimum for this type of equipment, follow

these steps exactly. If this is a new unit shipped directly from Baytech, follow the steps. If this is a

previously own unit, perform a factory reset to clear out any users and passwords still in the unit.

Ethernet Controller Configuration:

Before continuing your System Administrator needs to tell you to use DHCP or give you an IP

Address, Subnet Address, and Gateway Address.

1. Connect the 9FRJ45PC-4 or 9FRJ45PC-1 adapter to your PC.

2. Connect the supplied rollover flat cable RJ08X007 to the adapter and to the EIA232 serial port

on the Baytech HOST Module.

3. Use terminal emulation software to access the unit, (i.e. Microsoft Hyper-terminal). Set the PC

serial port configuration to the following: 9600 bps, 8 data bits, 1stop bit and no parity.

4. If you get only a blinking cursor Press ‘Enter’. If still only a blinking cursor, Type 5 semi-colons

(;), The Attention Character will not echo on the screen. There is a one second delay before

the menu is displayed. You should see a menu similar to (Figure 1).

DS62-Network, DS62-MD4 Network/Modem Host Module

5. Select ‘C’ for the configuration menu.

6. Select the HOST module. You should see a menu similar to (Figure 2).

7. Select the number for ‘Login Setup’ option. You should see a menu similar to (Figure 3).

8. Select the number for ‘Manage Users’ option. You should see a menu similar to (Figure 4).

9. NOTE: The ‘root’ user can not be deleted.

10. Select ‘A’ to add user. Type the name and password at the prompts.

11. Press ‘Enter’ until get to the ‘Login Setup Menu’ (Figure 3).

12. Select option ‘Access Control’ to enable or disable the Tenet and Serial Login Prompt.

13. Press ‘Enter’ until you get the Configuration menu (Figure 2).

14. Select ‘Network Port Configuration’ option. You should see a menu similar to (Figure 5).

15. If your System Administrator requires you to use DHCP, then select ‘DHCP Enable/Disable’

and type ‘Y’ to enable DHCP. If you wish to assign a static IP address to this unit, disable the

DHCP and go to step 18.

16. Press ‘Enter’ until you are asked to ‘Accept Changes’. Type ‘Y’ to accept changes or ‘N’ to

decline changes.

17. After Accepting or Declining Changes Pres ‘Enter ‘ until you get the Network Access Menu

(Figure 1).

18. Select ‘Unit reset’ to update the external connections. Once the reset is completed (1 minute)

connect the Baytech device to your network using an Ethernet cable.

19. If you disabled the DHCP in step 15, you should see a menu similar to (Figure 5).

20. Select the ‘IP Address’ option and type the assigned IP address and press ‘Enter’.

21. Select the ‘Subnet Mask’ option and type the assigned subnet mask address and press

‘Enter’.

22. Select the ‘Gateway Address’ option and type the assigned Gateway address and press

‘Enter’.

23. Press ‘Enter’ until you are asked to ‘Accept Changes’. Type ‘Y’ to accept changes.

24. Press ‘Enter’ until you get the Network Access Menu, (Figure 1).

25. Select ‘Unit reset’ to update the external connections. Once the reset is completed (1 minute)

connect the Baytech device to your network using an Ethernet cable.

At this point you have enough basic configurations needed to operate this Baytech unit.

Serial Setup

•Verify JMP5 is set to pins 1and 2on the DS62 module.

•Connect the 9FRJ45PC-4 adapter to the user’s computer

•Connect the Host Module’s EIA-232 port to the adapter via the RJ08X007 rolled flat ribbon

cable.

•Use terminal emulation software to access the unit, 9600 bps, 8 data bits, 1stop bit and no

parity.

NOTE: At any time during the session you need to go to another menu, use the Attention

Character = semi-colon (;). Press the attention character key 5 consecutive times to get back to the

main status menu.

DS62-Network, DS62-MD4 Network/Modem Host Module

Figure 1

Select option ‘C’ for the configuration menu. Select the DS62 module option and the following menu

is displayed:

Figure 2

Module Name: DS62

Module: 1

Attention Character: ;

Device A (2, 1).........1

Device B (2, 2).........2

Device C (2, 3).........3

Device D (2, 4).........4

DS-DS (5, 1).........5

Status..........................S Current configuration

Configure.......................C Make Changes

Unit Reset......................RU Resets the DS-Unit, terminates internal &

external modem connections, allow 10

seconds for reset.

Logout..........................T

Enter Request :c

DS62 Ethernet Host module

Revision F 2.10.05 Module 1

Hardware 1.01 Serial number 509 colilo version 1.05.01

Status..........................1 Current setting of the module

Serial Port Configuration.......2 Setup the port configuration menu

Serial Port Device Name.........3 Name the port

Attention Character.............4 Pressing the attention character 5

consecutive times will return back to the

main menu.

Disconnect Timeguard............5 If more data is received within the delay

period, the DS series treats the

character as data, not an attention

character; thereby preventing unwanted

port disconnection.

Connect Port ID Echo............6 Enable port echo by name or module&port#

Connection/Radius/TACACS

Network Port Configuration......8 Network Setup IP Address

Module Name.....................9 Enter a name for the module

DS Management..................10 Set up Voltage/Current/Sensor thresholds

Firmware / Config Download.....11 Updates by FTP & Reset to Factory Config

Exit.........................X,CR

Enter Request :

DS62-Network, DS62-MD4 Network/Modem Host Module

Attention Character

If no Baytech power strips are to be controlled through this Data Server, skip this step. Pressing the

Attention Character 5 consecutive times will access the network main menu. The Default is a semi-

colon (;). Select this option to change the attention character. The DS displays the following:

Attention Character is........... ;

Enter Attention Character :

Figure 3

Access Control

This security feature allows the admin to enable or disable usernames and passwords for both network

and serial port access.

If either login has been enabled you will get a prompt similar to the following:

Coldfire login: root

Password:

The default user and password is “root/baytech”, all lower case.

Manage Users

This menu allows the administrator to add/delete users and change their passwords for multiple users.

Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and

alphanumeric. The root user can not be removed. Select Manage User and the DS displays the

following:

Figure 4

Access Control..................1 Telnet/Serial Enable/Disable Login prompt

Manage Users....................2 Change user password or port access,

add/delete user,

Direct Port Connection..........3 Enable/Disable

Radius Configuration............4 See below for Radius menu

TACACS Configuration............5 See below for TACACS menu

Exit.........................X,CR

Enter Request :

User Management Menu

To change user password or port access, enter number of user.

To add/delete user, select appropriate menu choice.

SNMP V3 requires passwords that are between 8 and 31 characters long

Enter request, CR to exit menus.

A)...Add user

1)...root

Enter Request :

Autres manuels pour BayTech DS62

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BayTech Matériel réseau

BayTech

BayTech 24SII Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur