Bartec Auto ID TECH700 Manuel utilisateur
TECH700 Software version v57.0.3.2
TR
2018
U
SER
G
UIDE
Tyre Pressure Monitoring
Syste Tool
T E C H 7 0 0 User Guide 2 0 1 8
2 | P a g e
F
OREWORD
Dear customer
Than you for having chosen one of our tools. We are certain that it will
give the utmost satisfaction and be a great help on the job with Tyre
Pressure Monitoring Systems.
Please become fully familiar with the instructions in this user’s manual. It
should be ept ready to hand for consultation whenever required.
The TECH700 is a test and diagnostics tool for Truc and Bus Tyre
Pressure Monitoring Systems. It is designed for future updating and
extension with new functions and vehicle coverage.
CE COMPLIANCE
Type Designation: TECH700
Description/Intended Use: Hand Held Tyre Pressure Measurement Tool/used to activate, decode data
from, and display information about tyre pressure monitoring devices for Truc s and Buses.
Hereby, Bartec Auto ID declares that the product referenced above is in compliance with the
essential requirements of Directive 1999/5/EC, on the approximation of the laws of the member
states relating to Directive 1999/5/EC.
T E C H 7 0 0 User Guide 2 0 1 8
P a g e | 3
T E C H 7 0 0 User Guide 2 0 1 8
4 | P a g e
T
ABLE
O
F
C
ONTENTS
Foreword .................................................................................. 2
Table Of Contents ................................................................... 4
I portant Notices .................................................................. 5
Safety Precautions .................................................................. 7
Kit Co ponents .................................................................... 10
Tool Layout ............................................................................ 11
Menu Navigation .................................................................. 12
Tool Positioning .................................................................... 14
Tool Connections/Charging Tool ........................................ 15
Power ON/OFF Sequence ..................................................... 16
Ho e Menu ........................................................................... 17
Vehicle Check ........................................................................ 19
Possible Reading Scenarios ................................................. 24
View Sensor Data .................................................................. 25
Delete Sensor Data ............................................................... 25
Settings .................................................................................. 26
Results Audit Syste ............................................................ 27
Technical Specification......................................................... 29
T E C H 7 0 0 User Guide 2 0 1 8
P a g e | 5
I
MPORTANT
N
OTICES
SAFETY DEFINITIONS
All Danger, Warning, I portant, and Note messages must be followed for your safety.
These safety messages are in the following formats:
DANGER: Means you ay risk possible loss of life.
WARNING: Means you ay risk possible bodily har .
CAUTION: Means you ris damage to the vehicle or the tool.
These safety messages cover situations Bartec Auto ID is aware of. Bartec Auto ID cannot
now, evaluate and advise you as to all the possible hazards. You must be certain that any
conditions or service procedures encountered do not jeopardize your personal safety.
COPYRIGHT
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Bartec Auto ID.
DISCLAIMER
T E C H 7 0 0 User Guide 2 0 1 8
6 | P a g e
All information, illustrations, and specifications contained in this technical instruction manual
are based on the latest information available at the time of publication. The right is reserved
to ma e changes at any time without obligation to notify any person or organization of such
revisions or changes. Further, Bartec Auto ID shall not be liable for errors contained with the
furnishing, performance or use of this material.
T E C H 7 0 0 User Guide 2 0 1 8
P a g e | 7
S
AFETY
P
RECAUTIONS
Read carefully the installation, operating and maintenance instructions in the Operator’s
manual.
Do not allow unqualified people to use this equipment. This will prevent injury to people and
damage to the equipment.
The wor place must be dry, sufficiently lit and well ventilated.
Do not forget that breathing carbon monoxide (odourless) can be very dangerous and even
fatal.
When working on the vehicle:
•Wear suitable clothing and act in such a way as to prevent industrial accidents.
•Before starting, chec to be certain the gear shift is in neutral (or in PARK (P) if the
transmission is automatic) and put the handbra e on and chec to be sure the wheels
are completely loc ed.
•Do not smo e or use na ed flames when wor ing on a vehicle.
•Wear safety glasses to protect your eyes from dirt, dust or metal chips.
T E C H 7 0 0 User Guide 2 0 1 8
8 | P a g e
Disposing of equip ent
•Do not dispose of this equipment as miscellaneous solid waste but arrange to have
collected separately.
•The re-use or correct recycling of electronic equipment (EEE) is important in order to
protect the environment and human health.
•In accordance with European Directive WEEE 2002/96/EC, special disposal points are
available for waste electrical and electronic equipment.
•Public administrators and producers of electrical and electronic equipment are
involved in facilitating the re-use and recovery of waste electrical and electronic
equipment through these collection activities and use of appropriate planning
arrangements.
•
Unauthorised disposal of waste electrical and electronic equipment is punishable by
law with appropriate penalties.
Disposing of batteries
•The TECH700 contains a Lithium Polymer rechargeable battery which is not accessible
to the user.
•
Batteries must be recycled or disposed of properly. Do not throw batteries away as
part of normal refuse disposal.
•Do no throw batteries on to an open fire.
T E C H 7 0 0 User Guide 2 0 1 8
P a g e | 9
CORRECT USE OF THE TECH700
In order to use the TECH700
correctly
:
•Do not expose the TECH700 to excessive moisture.
•Do not use the TECH700 near sources of heat or polluting emissions (stoves, ovens,
etc.)
•Do not drop the TECH700.
•Do not allow the TECH700 to come into contact with water or other liquids.
•Do not open the TECH700 or attempt to perform maintenance or repair operations
on any internal parts.
•You are advised to eep the pac aging and to re-use it if the TECH700 is moved to
another site.
When using the TECH700 re e ber:
•
Do not subject the TECH700 to magnetic or electric interference.
Reception, maintenance and guarantee:
Inspect the tool when delivered. Damage sustained during shipment is not covered by the
guarantee. Bartec Auto ID will accept no responsibility for material or bodily harm resulting from
inappropriate use of the product, failure to maintain it, or incorrect storage conditions.
Bartec Auto ID provides training for clients desirous of acquiring the knowledge required for the
correct use of its products.
Only personnel authori ed by Bartec Auto ID are permitted to make any repairs that may be
necessary. This tool is guaranteed against any manufacturing fault for 24 months as of date of
invoice (parts and labour) only if product has been correctly used. Serial number must stay
readable.
T E C H 7 0 0 User Guide 2 0 1 8
10 | P a g e
K
IT
C
OMPONENTS
The TECH700 it inside the tool box includes:
•Sensor diagnostic tool
•USB cable
•Wireless charger
•Quic Start Guide
•Bluetooth-Dongle
Identifying Kit Co ponents and Features
The TECH700 is battery operated and generates a low-frequency magnetic field to
activate tyre sensors. It receives UHF radio signals from the tyre sensors typically at
433MHz and 315MHz
Table des matières
Autres manuels Bartec Auto ID Instrument de mesure
Bartec Auto ID
Bartec Auto ID TECH500 Manuel utilisateur
Bartec Auto ID
Bartec Auto ID ALCAR TECH350 Manuel utilisateur
Bartec Auto ID
Bartec Auto ID TECH600 Manuel utilisateur
Bartec Auto ID
Bartec Auto ID Tech500SDE Manuel utilisateur
Bartec Auto ID
Bartec Auto ID TECH1000 Manuel utilisateur
Bartec Auto ID
Bartec Auto ID TECH450 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur