Barco MVSP10 Manuel utilisateur
Getting Started Guide
MVSP10
(This page intentionally left blank.)
2
(This page intentionally left blank.)
3
Copyright notice
Copyright
This document is copyrighted. All rights are reserved. Neither this
document, nor any part of it, may be reproduced or copied in any
form or by any means - graphical, electronic, or mechanical including
photocopying, taping or information storage and retrieval systems -
without written permission of Barco
© 2009 Barco N.V. All rights reserved.
Disclaimer Notice
Although every attempt has been made to achieve technical accuracy
in this document, we assume no responsibility for errors that may be
found. Our goal is to provide you with the most accurate and usable
documentation possible; if you discover errors, please let us know.
Barco software products are the property of Barco. They are
distributed under copyright by Barco N.V. or Barco, Inc., for use only
under the specific terms of a software license agreement between
Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or
disclosure of a Barco software product, in any form, is authorized.
The specifications of Barco products are subject to change without
notice.
Trademarks
All trademarks and registered trademarks are property of their
respective owners.
(This page intentionally left blank.)
4
Table of Contents
5
Table of Contents
Preface..................................................................................... 6
CE mark notice ................................................................................. 6
Environmental information ............................................................. 7
Safety Instructions ........................................................................... 8
Explanation of symbols.................................................................. 10
Introduction ........................................................................... 12
Parts, controls and connectors ...................................................... 12
Front ........................................................................................ 12
Rear ......................................................................................... 14
Marking of the unit........................................................................ 16
Installation............................................................................. 18
Installation precautions ................................................................. 18
Fixing the unit ................................................................................ 18
Connecting the signal cables......................................................... 20
Front ........................................................................................ 20
Rear ......................................................................................... 21
Cleaning instructions ............................................................. 23
Precautions..................................................................................... 23
Cleaning the unit............................................................................ 23
Technical information............................................................ 25
Connector pin assignments ........................................................... 25
Technical specifications ................................................................. 30
Warranty Statement .............................................................. 32
Preface
6
Preface
CE mark notice
Declaration of Conformity in accordance with Article 10 (1) of the CE directive
This product has been designed and manufactured in accordance with
the essential requirements of the Directives 89/336/EEC and
MDD 93/42/EEC (class II b product), and for this product the
procedures of Annex II have been applied to mark the product with
the CE label.
Preface
7
Environmental information
Disposal Information
This product consists of devices that may contain mercury, which must
be recycled or disposed of in accordance with local, state, or country
laws.
This equipment has required the extraction and use of natural
resources for its production. It may contain hazardous substances for
health and environment.
In order to avoid the dissemination of those substances in the
environment and to diminish the pressure on natural resources, we
encourage you to use the appropriate take-back systems.
Those systems will reuse or recycle most of the materials of your end-
of-life equipment in a sound way.
The crossed-out wheeled bin symbol invites you to use those
systems.
If you need more information on the collection, reuse and
recycling systems, please contact your local or regional waste
administrator.
You can also contact us for more information on the environmental
performances of our products.
Preface
8
Safety Instructions
General Recommendations
Read the safety and operating instructions before operating the
equipment.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the equipment and in the operating
instructions manual.
Follow all instructions for operation and use.
Electrical shock
Type of protection (electrical):
Equipment with internal power supply: Class II equipment.
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
Non-patient care equipment
Equipment primarily for use in a health care facility that is intended
for use where contact with a patient is unlikely.
Power connection - equipment with internal power supply
The equipment must be powered by the AC mains voltage.
Preface
9
Power cords:
• Utilize a UL-listed detachable power cord, 3-wire, type SJ or
equivalent, 18 AWG min., rated 300 V min., provided with a
hospital-grade type plug 5-15P configuration for 120V
application, or 6-15P for 240V application.
• Do not overload wall outlets and extension cords as this may
result in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should
be routed so that they are not likely to be walked upon or
pinched by items placed upon or against them, paying
particular attention to cords at plugs and receptacles.
Water and moisture
Never expose the equipment to rain or moisture.
Never use the equipment near water - e.g. near a bathtub,
washbasin, swimming pool, kitchen sink, laundry tub or in a wet
basement.
Ventilation
Do not cover or block the ventilation openings in the cover of the set.
When installing the equipment in a cupboard or another closed
location, heed the necessary space between the set and the sides of
the cupboard.
This apparatus conforms to:
CE0120 (MDD 93/42/EEC class IIb product), IEC 60601-1, UL 60601-1,
CAN/CSA C22.2 No. 601.01-M90 (c-UL).
National Scandinavian Deviations for Cl. 1.7.2 :
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
Preface
10
Explanation of symbols
Symbols on the equipment
On the equipment, you may find the following symbols
(nonrestrictive list):
Indicates compliance to the essential require-
ments of the Directive 93/42/EEC
or
Indicates the equipment is approved accord-
ing to the UL regulations
or
Indicates the equipment is approved accord-
ing to the c-UL regulations
Indicates the equipment is approved accord-
ing to the DEMKO regulations
Indicates the USB connectors on the equip-
ment
Indicates the manufacturing date
Indicates the temperature limitations for the
equipment to operate within specs
Indicates the equipment serial no.
Consult the operating instructions
Table des matières
Autres manuels Barco Changer
Barco
Barco FSN Series Manuel utilisateur
Barco
Barco ACS-2048 Manuel utilisateur
Barco
Barco ScreenPRO-II Manuel utilisateur
Barco
Barco DCS-100 Manuel utilisateur
Barco
Barco R9806700 Manuel utilisateur
Barco
Barco SDI-DMX Mixer Pro Manuel utilisateur
Barco
Barco ScreenPRO-II Manuel utilisateur
Barco
Barco ACS-2048 Manuel utilisateur
Barco
Barco DCS-100 Manuel utilisateur
Barco
Barco DCS-200 Manuel utilisateur
Barco
Barco FSN-1004 Manuel utilisateur
Barco
Barco VSE 60 Manuel utilisateur
Barco
Barco MatrixPRO 8x8 DVI Manuel utilisateur
Barco
Barco DCS-200 Manuel utilisateur
Barco
Barco SMV-116 Manuel utilisateur
Barco
Barco DCS-200 Manuel utilisateur
Barco
Barco PDS Manuel utilisateur
Barco
Barco PresentationPRO-II Manuel utilisateur
Barco
Barco ImagePRO-4K Manuel d'installation et d'exploitation
Barco
Barco PDS Series Manuel utilisateur
