Barco HDX 4K Manuel utilisateur

R5906069 /01

HDX 4K

Quick Start Guide

Install Lens & Lens safety cable !! ONLY USE TLD+ Zoom Lenses !!

1. Remove the plastic cover from the Lens Holder opening.

2. Place the Lens Holder in unlock position. Handle towards electrical socket.

3. Gently insert the lens. Ensure the lens connector matches the electrical socket on the Lens Holder.

4. Insert the lens until the connector seats into the socket.

5. Secure the lens in the Lens Holder. Move the handle into the lock position.

6. Check if the lens touches the front plate of the Lens Holder.

7. Check if the lens is really secured by trying to pull the lens out of the Lens Holder.

8. Install the lens safety cable tightly around the lens. Keep safety cable as short as possible.

9. Attach lens safety cable with projector frame. Keep safety cable as short as possible.

Connect power

Ensure that the power is properly connected to the powerinput.

(110-130V / 200-240V, 15A, 50-60Hz)

Download Product Manual

Product manuals and documentation are available online at www.barco.com/td/R9012100

Registration may be required; follow the instructions given on the website.

IMPORTANT!

Read Installation Instructions before connecting equipment to the mains power supply.

- 2 -

2. Orientation of the unit is set as standard in table front projection mode.

Change the projector set up in the ALIGNMENT > ORIENTATION menu.

3. For Advanced adustments like Warping, Light management, etc. see User Guide of the projector.

Adjust

1. Adjust the lens settings by pressing the LENS button or via the direct lens keys on the RCU.

Select the “Greenfocus” test pattern to adjust the lens.

Connect and Select source

1. Connectavailable sourcesto the appropriate inputports.

2. Select connected source:

- The LED of the selected source lit up GREEN.

- Image of selected inputappears.

Startup

1. Power on. Turn the mains switch to on ( I ).

- Start up sequence starts. Backlight of the Power on/off button flashes WHITE.

2. Press the Power on/off button.

- The backlight of the Power on/off button changes from WHITE to BLUE.

- Local LCD displays a start up screen.

- 3 -

Switch off

1. Press the Power on/off button for three seconds.

2. Wait until the after-cooling cycle is finished (up to 300 sec.)

3. Turn the mains switch to off (’0’).

4. Unplug the power cord from the projector.

321

300 s

3 s

Local Keypad

1MenuNavigation.

2MenuSelection.

3Open Menu.

4MenuBack.

5Power On/Off.

6OSD On/Off.

7InputSelection.

8Shutter Open/Close.

9Test Patterns.

10 Lens Menu.

11 Touch Panel.

1 2 3 4 5 6

1011 9 8 7

• Remove the lens before transporting the projector.

• First switch the projector to Standby mode and wait until After Cooling is

finished to switch off the main power.

• Ensure the projector is operating with clean filters.

• Do not block the ventilation in and outlets.

• Laser light can cause severe damage to the DMD. This damage is

not covered by warranty.

Precautions

- 4 -

RCU buttons

1Button pressed indicator.

13 Numeric buttons.

2Shutter Open.

14 XLR connector.

3Shutter Close.

15 Macro button.

4Touch Panel On/Off.

16 MenuBack.

5LCD On/Off.

17 Defaultbutton.

6Lens Zoom.

18 Lens Focus.

7Lens Shift.

19 Color On/Off.

8Menu Activation.

20 Test Patterns.

9Menu Selection.

21 Power On.

10 Menu Navigation.

22 Power Off.

11 Input Selection.

23 Stereo Jack.

12 Address button.

24 RCU On/Off.

- 5 -

Communication Panel

321 4 5 6 7 8 9 10 11 12 13

1WiFi antenna for wireless IP (optional) 8RS232 for serial communication

212V 1A output 9Sync Out

3Firmware update/USB backup custom settings 10 Sync In

410/100 base-T for external control over IP and Art-Net 11 Status lights

5DMX interface input 12 IR receive sensor

6DMX interface output 13 GSM antenna input (optional)

7XLR input for wired projector control

Venues & Hospitality Input (V&H)

SELSELSELSELSELSELSEL

TUO/NIIDSNIIDS

SEL

SYNC

DP HDMI

SYNC

HDBT 1

SYNC

HDBT 2

SYNCSYNC

1 2 3 4 5 6 7 8

1Quad 3G SDI channel A Input 5DisplayPort Input

2Quad 3G SDI channel B Input 6HDMI Input

3Quad 3G SDI channel C Input/Output 7HDBaseT Input 1

4Quad 3G SDI channel D Input/Output 8HDBaseT Input 2

Virtual & Augmented Reality Input (V&AR) (Optional)

SELSELSELSEL

DP A DP B DP C DP D

SYNCSYNCSYNCSYNC

1 2 3 4

1Quad DisplayPort channel A Input 3Quad DisplayPort channel C Input

2Quad DisplayPort channel B Input 4Quad DisplayPort channel D Input

- 6 -

Button Backlight Status

Button Color status Description

Projector starts up (Booting)Blinking WHITE

Projector is in StandbySolid WHITE

Blinking RED Error condition

Blinking BLUE Projectorgoes to ON mode

Projector is ON

Power button

Solid BLUE

Off Projector not in power ON state

Solid WHITE Shutter is open

Shutter is closedSolid RED

Shutter button

LED Status

LED Color status Description

Off Projector powers up

Projector is in StandbyRED

Projector is ReadyORANGE

PWR (power LED)

GREEN Projector is on

Lamp is offOff

No lamp insertedRED

Lamp is on in ECO mode

ORANGE

GREEN Lamp is on in normal mode

LIGHT (Illumination LED)

Lamp is on in CLO modeGREEN-ORANGE

Off No error

RED toggleson/off Error

ERR (error LED)

ORANGE toggleson/off Warning

IR signal receivedREDIR

GREEN IR signal acknowledged

Support

Website www.barco.com/esupport

- USA +1 866 374 7878

- EMEA +32 56 36 8019

- APAC +86 400 88 22726

Tel.:

Table des matières

Autres manuels Barco Projecteur

Barco

Barco SP4K-C Series Guide de l'utilisateur

Barco

Barco NW-12 Manuel utilisateur

Barco

Barco UDM Series Manuel utilisateur

Barco

Barco F22 Series Manuel utilisateur

Barco

Barco HDF W26 Manuel utilisateur

Barco

Barco R9002030 Manuel utilisateur

Barco

Barco R9004460 Manuel utilisateur

Barco

Barco G50 Manuel utilisateur

Barco

Barco Vision 708 9002357 Manuel utilisateur

Barco

Barco Galaxy 6 Classic+ Manuel

Barco

Barco R9001070 Manuel utilisateur

Barco

Barco FL-FS40 MKII Manuel utilisateur

Barco

Barco PJWU-101B Manuel utilisateur

Barco

Barco R9002370 Manuel utilisateur

Barco

Barco R9050100 Manuel utilisateur

Barco

Barco SP2K-C Manuel utilisateur

Barco

Barco RLS W12 Manuel utilisateur

Barco

Barco DP2K--20C Manuel utilisateur

Barco

Barco RLM-W12 Manuel utilisateur

Barco

Barco BARCOELM R18 Manuel utilisateur

Barco

Barco R9002327 Manuel utilisateur

Barco

Barco R9000901 Instructions d'utilisation et de sécurité

Barco

Barco Vision 3200 Manuel utilisateur

Barco

Barco R9001310 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur