Barco G50 Manuel utilisateur

ENABLING BRIGHT OUTCOMES

R5916680 /00 | 2023-05-09

CAUTION: It is important to read the installation instructions before connecting the equipment to the

mains power supply.

Download Product Manual: Product manuals and documentation are a ailable online at

https://www.barco.com/support. The QR code at the bottom of this page leads directly to the G50

product page on the Barco website. Registration may be required; follow the instructions gi en on

the website.

Remote Control Unit RCU)

Power On

Power Off (Standby)

Number keys 0-9

Source information

Projector ID setting

Auto sync input source

Select input source

Confirm menu selection

Menu na igation

Adjust brightness

Adjust contrast

Open OSD menu

Back to parent menu or exit menu

Preset color mode

Display test patterns

Adjust lens shift

Adjust focus

Adjust horizontal/ ertical keystone

Adjust image size

Shutter

User programmable hot key

Default USER 1 = Audio Mute on/off

Default USER 2 = Short cut Audio Volume

Models G50-W6, G50-W7, G50-W8

Quick Start Guide

G50

- 2 -

Control panel

ZOOM FOCUS

Adjust lens position

Confirm the settings

Adjust the image focus

Menu na igation buttons

Adjust horizontal/ ertical keystone

Back to parent menu or exit menu

Enter OSD menu

Power On/Off

Adjust the image size

Input/Output ports

HDBaseT ETHERNETHDMI-2 IN HDMI-1 IN HDMI OUT

DISPLAY PORT

3D SYNC

OUT RS232

AUDIO Out

12V Out REMOTE USB

(5V/1.5A)

1 2 3 4 5 6 7 8 9 10 11 12 13

DC 12V output

HDMI input port 1

3D sync output port

Wired remote input

HDMI output port

USB port type A

HDBaseT port

DisplayPort port

RS232 serial port

LAN connection (RJ45)

3D sync input port

Audio output port

HDMI input port 2

Installation requirements

Requirement Value

Operation temperature 5°C - 40°C (41°F - 104°F)

Humidity 10 - 85% RH non-condensing

Power 96 - 264 V, 50 - 60 Hz

Dimensions without lens 486 x 376 x 203 mm (W x L x H)

Weight without lens G50-W6: 11,0 kg; G50-W7: 11,8 kg; G50-W8: 13,0 kg

Air cleanliness

50 cm

(19,7”)

100 cm

(39.4”)

50 cm

(19,7”)

50 cm

(19,7”)

Clean office en ironment, free from hostile airborne particles which

may ha e harmful effects on the internal parts of the projector (e.g.,

airborne contaminants produced by smoke machines, excessi e dust).

The projector must be installed with free air space of 100 cm on the

front side (lens side) and 50 cm on all other sides of the projector.

- 3 -

Installing the RCU batteries

1. Remo e the co er by sliding it in the direction indicated by the arrow.

2. Insert two new AAA batteries (obser e the polarity).

3. Reinstall the co er.

1 2 3

CAUTION: Replace batteries with the correct battery type. Use AAA size batteries. There is a risk of

explosion if the batteries are replaced with an incorrect type. Make sure the polarities match the +

and - marks, as depicted on the inside of the battery compartment. There is a risk of explosion if the

batteries are installed incorrectly. Use alkaline batteries for optimum range and life time.

Batteries are not included in the packaging. It is up to the user to purchase the correct batteries.

Installing the lens

1. Remo e the lens cap. Release the lens by turning it counterclockwise and pulling it outwards.

Warning: Lens cap should be remo ed before installing the lens. If not it will damage the projector.

2. Gently insert the lens in the lens holder. Ensure that the label “TOP”(reference T) is upwards oriented while

inserting the lens.

3. Rotate the lens clockwise to lock the lens.

1 2 3

CAUTION: Do not transport the projector with any lens installed.

How to power on the projector

1. Connect the projector with the power net as follows:

a) Ensure that the AC switch (reference 1) stands in the ‘0’(OFF) position.

b) Plug in the mains cord in the power input socket of the projector.

c) Connect the other side of the mains cord with the power net.

d) Power on the AC switch (reference 1) and wait until the POWER button on the control panel is solid

red.

- 4 -

FOCUS

2. Turn on the projector by pressing the POWER ON button (reference 2) on the remote control or the

POWER ON/OFF button (reference 3) on the control panel.

The status LED will flash orange. The startup screen will display and the status LED will turn to solid green

(reference 4).

Note: The first time that the projector starts up you ha e to accept the EULA statements to

continue using the projector. Follow the instructions on the screen.

ZOOM

FOCUS

2 3 4

3. Turn on your source input. The projector detects the source you selected and displays the image.

Note: If you connect multiple input sources at the same time, press the Input key on the control

panel or on the remote control to switch inputs.

WARNING: Do not look directly into the lens when the projector is on. The strong light may cause

permanent eye damage.

How to power off the projector

1. Press the Power Off button (reference 2) on the remote control or the Power On/Off button (reference 3)

on the control panel.

A confirmation request will be prompted on the screen.

2. Press the same button again to confirm.

Note: If not confirmed after fi e seconds, the confirmation request will disappear and the projector

will remain on.

CAUTION: Don’t power on the projector again immediately after entering standby mode.

CAUTION: Don’t switch off or disconnect the projector from the power net until the cooling down

cycle is completed.

- 5 -

LED diagnostics

1 2 3

1Light LED

2Status LED

3AV Mute LED

Message Light LED (1) Status LED (2) AV Mute LED (3)

Green Orange Red Green Orange Red Green Orange

Standby State

Power On

Warm up

Flashing

Power On &

Laser diode on

Steady Steady Steady

Power Off

Cooling down

Flashing

AV mute is off

Image displayed

Steady Steady Steady

AV mute is on

Image is black

Steady Steady

Projector

communication

Steady Flashing Steady

Firmware upgrade Flashing Flashing

Burn-in Flashing Flashing

Factory reset Steady Steady

Error

O er temperature

Steady

Error

Fan failure

Flashing

Error

Color Wheel failure

Flashing

- 6 -

Connecting with a desktop computer or laptop

HDBaseT ETHERNET HDMI-2 IN HDMI-1 IN HDMI OUT DISPLAY PORT

3D SYNC

OUT RS232

AUDIO Out

12V Out REMOTEUS B

(5V/1.5A)

Desktop Laptop

MonitorCamcorder Speakers

1 3 4

6 7 8

13D Sync cable

23D Sync cable

3HDMI cable

4HDMI input cable

5DisplayPort cable

6USB cable

7RS232 cable

8Audio cable

Connecting to a video source

HDBaseT ETHERNET HDMI -2 IN HDMI-1 IN HDMI OUT DISPLAY PORT

3D SYNC

OUT RS232

AUDIO Out

12V Out REM OTEUSB

(5V/1.5A)

Component video output

equipment

DVD PlayerVideo cassette recorder

1 2

1HDMI cable

2HDMI cable

Autres manuels pour G50

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Barco Projecteur

Barco

Barco DP2K-19B Manuel utilisateur

Barco

Barco DP4K-P Manuel utilisateur

Barco

Barco RLM G5i Performer R9010320 Manuel utilisateur

Barco

Barco R9040411 Manuel utilisateur

Barco

Barco iQ (PRO) G350 Manuel utilisateur

Barco

Barco F90 series Manuel utilisateur

Barco

Barco iQ PRO G500 Manuel

Barco

Barco BarcoReality SIM 6 Ultra II Manuel utilisateur

Barco

Barco F22 Series Manuel utilisateur

Barco

Barco OV-715 Manuel utilisateur

Barco

Barco R9001320 Manuel utilisateur

Barco

Barco NW-12 Manuel utilisateur

Barco

Barco R5975039 Manuel utilisateur

Barco

Barco VISION 701 MULTIMEDIA Manuel utilisateur

Barco

Barco BarcoReality 909 Manuel utilisateur

Barco

Barco BarcoReality SIM6 Ultra R9040150 Manuel utilisateur

Barco

Barco 800 Series Manuel utilisateur

Barco

Barco R9828870 Manuel utilisateur

Barco

Barco R9000972 Manuel utilisateur

Barco

Barco BarcoiQ GRAPHICS 500 Manuel utilisateur

Barco

Barco HDX 4K Manuel utilisateur

Barco

Barco RLM-W14 Manuel utilisateur

Barco

Barco DP2K-36BLP Manuel d'utilisation

Barco

Barco CNWU-61B Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur