Barco MFCD 1219 (TS Manuel utilisateur

User Manual

MFCD 1219 (T S)

(This page intentionally left blank.)

This document is copyrighted. All rights are reserved. Nor this

document, nor any part of it, may be reproduced or copied in any form

or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

Table of Contents

Preface ................................................................................................. 5

Environmental information.......................................................... 7

Safety Instructions........................................................................ 7

Recommendations for using your display system ................... 10

Overview............................................................................................ 12

Introduction ................................................................................ 12

Package contents ....................................................................... 13

Controls and connectors............................................................. 14

Installation ......................................................................................... 15

Precautions ................................................................................. 15

Wall mounting............................................................................ 15

Connecting the signals............................................................... 17

Starting up .................................................................................. 18

Install the software.................................................................... 20

On-screen display (OSD) ................................................................... 21

How to use the OSD ................................................................... 21

Description of the menu items.................................................. 22

Maintenance...................................................................................... 29

Appendix A: Possible resolutions ..................................................... 30

Appendix B: Technical specifications................................................ 31

Preface

Notice

Although every attempt has been made to achieve technical accuracy in

this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

BarcoView software products are the property of BarcoView. They are

distributed under copyright by Barco N.V. or BarcoView, LLC., for use only

under the specific terms of a software license agreement between

Barco N.V. or BarcoView LLC. and the licensee. No other use, duplication,

or disclosure of a BarcoView software product, in any form, is

authorized.

The specifications of BarcoView products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

FCC Compliance Information (display)

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

Preface

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Canadian notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-

003 du Canada.

Preface

Environmental information

Disposal Information

The lamps inside the display contain mercury. Do not throw the display

in the trash. Dispose of it as required by local ordinances or regulations.

This equipment has required the extraction and use of natural resources

for its production. It may contain hazardous substances for health and

environment.

In order to avoid the dissemination of those substances in the

environment and to diminish the pressure on natural resources, we

encourage you to use the appropriate take-back systems.

Those systems will reuse or recycle most of the materials of your end-

of-life equipment in a sound way.

The crossed-out wheeled bin symbol invites you to use those

systems.

If you need more information on the collection, reuse and

recycling systems, please contact your local or regional waste

administrator.

You can also contact us for more information on the environmental

performances of our products.

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the display.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the display and in the operating instructions

manual.

Follow all instructions for operation and use.

Preface

Electrical shock

Type of protection (electrical):

Class I equipment

Degree of safety (flammable anesthetic mixture):

Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

Power connection

• Power requirements: The display must be powered using the 12

VDC power supply that is supplied with the display.

• The 12 VDC power supply must be powered by the AC mains

voltage.

•Powercords:

Power cord with CEE 7 plug: The colors of the mains

lead are colored in accordance with the following

code: Green-and-yellow: Earth (safety earth), Blue:

Neutral, Brown: Line

Power cord with ANSI 73.11 plug: The wires of the

power cord are colored in accordance with the

following code: Green/yellow: ground, White: neutral,

Black: line (live)

• Do not overload wall outlets and extension cords as this may

result in fire or electric shock.

• Mains lead protection (U.S.: Power cord): Power cords should be

routed so that they are not likely to be walked upon or pinched

by items placed upon or against them, paying particular

attention to cords at plugs and receptacles.

Preface

Water and moisture

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin,

swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set.

When installing the display in a cupboard or another closed location,

heed the necessary space between the set and the sides of the

cupboard.

Installation

Place the display on a flat, solid and stable surface that can bear the

weight of at least 3 displays. If you use an unstable cart or stand, the

display may fall, causing serious injury to a child or adult, and serious

damage to the equipment.

Do not lean/rest or add additional weight on the display.

When adjusting the angle of the display, move it slowly so as to prevent

the display from moving or slipping off from its stand.

When display is attached to an arm, do not use the display as a handle

or grip in order to move the display. Please refer to the instruction

manual of the arm for instructions on how to move the arm with the

display.

Provide full attention to safety during installation, periodic maintenance

and examination of this product.

Sufficient expertise is required for installing this product, especially to

determine the strength of the wall for withstanding the display’s

weight. Be sure to entrust the attachment of this product to the wall to

authorised contractors of Barco and pay adequate attention to safety

during the installation and usage.

Barco is not liable for any damage or injury caused by mishandling or

improper installation.

More warnings in the Installation chapter.

Preface

This apparatus conforms to:

CE (LVD 73/23/EEC), IEC 60950-1, UL 60950-1,

CAN/CSA C22.2 No. 60950-1 (c-UL), EN 60950-1 DEMKO,

CCC GB4943-1995

National Scandinavian Deviations for Cl. 1.7.2 :

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan"

Norway: "Apparatet må tilkoples jordet stikkontakt"

Sweden: "Apparaten skall anslutas till jordat uttag"

Recommendations for using your display system

1. Optimize the lifetime of your display

Enabling the Display Power Management System (DPMS) of your display

(in the display’s Settings menu) will optimize its diagnostic lifetime by

automatically switching off the backlight when the display is not used

for a specified period of time. By default, DPMS is enabled on your

display, but it also needs to be activated on your workstation. To do this,

go to “Power Options Properties” in the “Control Panel”.

Barco recommends setting DPMS activation after 20 minutes of

non-usage.

2. Use a screen saver to avoid image retention

Prolonged operation of an LCD with the same content on the same

screen area may result in a form of image retention.

You can avoid or significantly reduce the occurrence of this phenomenon

by using a screen saver. You can activate a screen saver in the “Display

properties” window of your workstation.

Barco recommends setting screen saver activation after 5 minutes

of non-usage. A good screen saver displays moving content.

In case you are working with the same image or an application with

static image elements for several hours continuously (so that the screen

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Barco Moniteur

Barco

Barco MDRC-2122 WP Manuel utilisateur

Barco

Barco Nio 5MP Guide de l'utilisateur

Barco

Barco Eonis MDRC-2224 Manuel utilisateur

Barco

Barco LCS-42 Manuel utilisateur

Barco

Barco Coronic Uniti Manuel utilisateur

Barco

Barco SLite 10 XP Manuel

Barco

Barco MDSC-8527 Manuel utilisateur

Barco

Barco MVGD 1318 Manuel utilisateur

Barco

Barco DB-220 Manuel utilisateur

Barco

Barco MDRC-1219 HB Manuel utilisateur

Barco

Barco LDX46 Manuel utilisateur

Barco

Barco Nio Color 2MP Manuel utilisateur

Barco

Barco SP-10 Manuel utilisateur

Barco

Barco OverView EVD4621 Manuel du propriétaire

Barco

Barco Nio 5MP LED Manuel utilisateur

Barco

Barco FlexiVision III Manuel utilisateur

Barco

Barco MVGD 1319 Mode d’emploi

Barco

Barco Coronis 5MP Mammo Manuel utilisateur

Barco

Barco DM-1126 Manuel utilisateur

Barco

Barco ILite Series Manuel utilisateur

Barco

Barco MDSC-2232 DDI Manuel utilisateur

Barco

Barco MDCC-4330 Manuel utilisateur

Barco

Barco TCD-361 Manuel utilisateur

Barco

Barco RHDM-2301 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation