Barco Coronis MDCC 2121 Manuel utilisateur

Getting Started Guide

Coronis

Supported displays:

MDCC 2121, MDCG 2121, MDCG 3120

(This page intentionally left blank.)

This document is copyrighted. All rights are reserved. Neither this

document, nor any part of it, may be reproduced or copied in any

form or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

Notice

Although every attempt has been made to achieve technical accuracy

in this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

Barco software products are the property of Barco. They are

distributed under copyright by Barco N.V. or Barco, Inc., for use only

under the specific terms of a software license agreement between

Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or

disclosure of a Barco software product, in any form, is authorized.

The specifications of Barco products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

Patent information

This product is covered under the following intellectual property

rights:

US Patent RE43,707

US Patent 7,038,186

US Patent 7,166,829

US Patent 6,950,098

European Patent 1 274 066.

Indications for use

The Coronis displays are intended to be used in displaying and

viewing digital images for review and analysis by trained medical

practitioners.

The Coronis displays are not intended for primary diagnostic review of

Mammography images.

Table of Contents

Preface..................................................................................... 7

Regulatory compliance information................................................ 8

FCC Compliance Information..................................................... 8

Canadian notice ........................................................................ 9

CE mark notice ............................................................................... 10

Environmental information ........................................................... 11

Safety Instructions ......................................................................... 14

EMC notice ...................................................................................... 17

Explanation of symbols.................................................................. 23

Recommendations for using your display system ....................... 25

Display controller installation ............................................... 27

Display Controller Installation ....................................................... 28

Which display controller? ....................................................... 28

Installing a Barco display controller....................................... 28

Installation Procedure............................................................. 31

Display installation ................................................................ 37

Installation precautions ................................................................. 38

Display parts, controls and connectors ......................................... 39

Front ........................................................................................ 39

Rear ......................................................................................... 41

Connectors............................................................................... 41

Side.......................................................................................... 42

Foot.......................................................................................... 43

Single-head installation................................................................. 45

Dual-head installation ................................................................... 47

Vesa-mount installation ................................................................ 50

Adjust panel orientation................................................................ 51

Table of Contents

Connecting the signal cables......................................................... 52

Cable routing.................................................................................. 55

Cleaning instructions...................................................................... 58

Precautions.............................................................................. 58

Front glass............................................................................... 58

Cabinet .................................................................................... 59

Software installation ............................................................. 61

Driver and Software Installation ................................................... 62

Driver and software installation prerequisites...................... 62

Installing the BARCO MXRT drivers and software ................... 62

Installing the BARCOMED CORONIS or Nio drivers and software68

Where to get more information............................................ 75

Troubleshooting..................................................................... 77

General tips .................................................................................... 78

Configuring Windows..................................................................... 79

Setting the resolution of your BARCO CORONIS Display............ 79

Setting the Color and Palette Modes..................................... 81

Configuring the Windows desktop......................................... 81

Technical Specifications......................................................... 83

Warranty Statement .............................................................. 93

Preface

Regulatory compliance information

FCC Compliance Information

CLASS B:

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with manufacturer’s instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including

interference that may cause undesired operation.

The use of shielded cables for connection of the monitor to the

graphics card is required to ensure compliance with FCC regula-

tions. Changes or modifications to this unit not expressly

approved by Barco could void the user’s authority to operate this

equipment.

Regulatory compliance information

Canadian notice

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme à la norme NMB-001 du Canada.

CE mark notice

Declaration of Conformity in accordance with Article 10 (1) of the CE directive

This product has been designed and manufactured in accordance with

the essential requirements of the Directives 2004/108/EC and

MDD 93/42/EEC (amended by 2007/47/EC (class II b product), and

for this product the procedures of Annex II have been applied to mark

the product with the CE label.

Autres manuels pour Coronis MDCC 2121

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Barco Moniteur

Barco

Barco MDSC-2326 DDIH Manuel utilisateur

Barco

Barco TF-10 Manuel utilisateur

Barco

Barco MDRC-2124 Manuel utilisateur

Barco

Barco MDSC-2124 Manuel utilisateur

Barco

Barco Nio 5MP Guide de l'utilisateur

Barco

Barco SLite 10 XP Manuel utilisateur

Barco

Barco MDRC-2224 WP Manuel utilisateur

Barco

Barco Coronis Fusion 4MP Manuel utilisateur

Barco

Barco OVL-815 Instructions d'installation

Barco

Barco SLite Manuel utilisateur

Barco

Barco Solaris LC40 Manuel utilisateur

Barco

Barco T-20 Manuel utilisateur

Barco

Barco Color Coronis 2MP Manuel utilisateur

Barco

Barco MDNG-5221 Manuel utilisateur

Barco

Barco NX--4 Manuel utilisateur

Barco

Barco Nio MDNC-3521 SNES Manuel utilisateur

Barco

Barco OverView OL510 Manuel utilisateur

Barco

Barco SLite 10 XP Manuel

Barco

Barco Nio systems Mode d’emploi

Barco

Barco MFCD 3220 D Mode d’emploi

Barco

Barco MIVD 1218 Manuel utilisateur

Barco

Barco MDSC-8231 Manuel utilisateur

Barco

Barco MDRC-2120 Manuel du propriétaire

Barco

Barco B-10 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation