Bag Boy Hunter Quad Manuel utilisateur
User Manual
VERSION 1.2
Thank you for purchasing the Quad series
motorized cart. To get the most
out of your cart please follow these
quick steps before use.
• Charge your battery [section 4.0]
• Assemble your cart [section 3.0]
For Customer Support, please contact Bag Boy directly
for immediate and professional advice.
Email: [email protected]
Toll Free: 1.800.955.2269
NOTE: This user manual was correct at time of printing. The online
version is the most up-to-date and must be referred to as the
correct version. To download the most current user manual
please visit www.bagboy.com
Contents
Hunter™ Quad User Manual 03
1.0 Registration 04
2.0 What’s Included 04
3.0 Assembling Your Cart 05
3.1 Attaching the Front Wheels 05
3.2 Attaching the Rear Wheels 05
3.3 Rear Wheel Positions 06
3.4 Attaching the Fifth Wheel 06
3.5 Unfolding 07
3.6 Folding 08
3.7 Positioning the Seat 08
3.8 Attaching the Beverage Holder 09
3.9 Attaching the Umbrella Holder 10
4.0 Battery Care 10
4.1 Charging Your Battery 10
4.2 Tips and Looking After Your Battery 11
4.3 Plugging in the Battery 12
5.0 Battery Fuse 12
6.0 Front Wheels 13
6.1 Unlocking, Locking and Removing
the Front Wheels 13
6.2 Adjusting and Aligning the Front Wheels 13
6.3 Front Wheel Maintenance 14
7.0 Fitting Your Golf Bag 15
8.0 Operating the Top Box 15
8.1 On/Off Speed Control Button 15
8.2 Battery Level Indicator 16
8.3 Units Measurements 16
8.4 Distance Modes 16
8.5 Controlled Distance Function [CDF] 17
8.6 Competition Mode 17
9.0 Integrated GPS Holder
and Compartment 18
10.0 Warranty 18
11.0 Preventative Maintenance Program 21
11.1 Cleaning Your Quad Cart 21
11.2 Rear Wheel Axles Maintenance 21
11.3 Upper and Lower Bag Strap
Maintenance 21
11.4 Correcting the Alignment 21
11.5 Service Schedule 21
11.6 Service Record 23
12.0 Service and Repair Centers 24
13.0 Purchasing Parts and Accessories 24
14.0 Contact Bag Boy 24
15.0 Frequently Asked Questions 25
1.0 Registration
This cart should be registered prior to shipment. If you did not
supply Bag Boy or the retailer with your information please
contact Bag Boy Customer Service at 1-800-955-2269 so the user
information can be updated. The warranty will not be active until
the user information has been updated.
We will need the retailer name and your cart serial number.
Please record your cart serial number in the space below for
warranty purposes and for security. This is found under the
battery tray.
Your information will be kept confidential and secure. We require
this information for warranty activation.
My Serial Number is
[example ACQV01234567890 ]
Purchased Date
/ /
You may be required to show proof of purchase so we
recommend you keep your receipt with this manual.
2.0 What’s Included
• Quad Cart
• Battery
• Battery Bag and Lead [SLA batteries Only]
• Battery Charger
• Seat Bracket
• Umbrella Holder
• Lower Bag Strap
• Beverage Holder
• 5th Wheel
• Spare Parts
– Speed Button x 1
– 40A Fuse Connector x 1 [see battery care section]
– 4mm Allen Key [for aligning front wheel as required]
– 4 x Rubber Gaskets for the rotating front wheel housing
[see front wheel maintenance section]
04
3.0 Assembling Your Cart
3.1 Attaching the Front Wheels
The two front wheels need to be attached to your Quad cart.
There is no difference between each front wheel so either can be
placed on the left or right side. Simply line up the silver pin on the
front wheel with the cart and push into the frame until you hear a
positive click. You can test the wheel is in position by pulling firmly
on the wheel. It should not move out of position.
3.2 Attaching the Rear Wheels
Step 1. The two rear wheels are labeled LEFT & RIGHT with an ‘L’
or an ‘R’ on the interior hub. Standing behind the cart, slide the
release button on the left wheel and align the notches on the
wheel hub with the left axle.
Step 2. When placed in position simply release the button. You will
hear a “click” when the wheel is properly secured. To check that
the wheel is properly in position pull on the wheel. If it is properly in
position it will not slide off. Repeat for the right wheel.
Hunter™ Quad User Manual 05
L R
3.3 Rear Wheels Positions
The Quad cart is designed to allow the rear wheels to be in
two positions. The position is determined by where the wheel is
locked on the axle in either of the two grooves [see picture]. The
drive position is used during the normal operation of the cart.
The free wheel position is used to freely push the cart should you
experience battery or service issues on the course.
i. Drive position – Lock the wheel onto the groove closest to the
battery tray. To do this, while sliding the release button on the
wheel across, push the wheel on to the axle as far as possible.
To test for drive position, try rolling the wheel forward. If you feel
resistance, then the wheel is now in drive position and ready to
use. Repeat for both wheels.
ii. Free wheel – Lock the wheel into the groove furthest from the
battery tray. To do this, while sliding the release button across
on the wheel, push the wheel onto the axle and release the
release button onto the groove. To test for free wheel position,
try rolling the wheel forward. The wheel should spin freely with no
resistance. Repeat for both wheels.
3.4 Attaching the Fifth Wheel
06
Free wheel position
Drive position
Lay the cart upside down on a soft
surface. Disconnect the nut and
bolt from each arm of the 5th wheel
bracket and insert the 5th wheel arms
into position under the frame. Fit nut
into position and insert bolt through the
opposite side. Fasten the bolt using a
Phillips head screwdriver and repeat
on the opposite side.
Once both arms are attached, hold
down the lever to lock and unlock
the 5th wheel. You can rotate the 5th
wheel under the cart to lock it out of
the way for storage by pressing the
3.5 Unfolding
Step 1: Ensure both rear wheels
are attached.
Step 2: Release the red fold lever to
unlock the handle.
Step 3: Slide the red fold lever
upwards to unlock the frame.
Step 4: The handle is now free to pull upwards. The cart will
naturally unfold as you continue to pull upwards until the cart
is completely open.
Step 5: Close the red fold lever to lock the handle into place.
Hunter™ Quad User Manual 07
lever and sliding the arms toward the front of the cart and folding
back, releasing the lever locks the 5th wheel into position. Reverse
the process to disengage the 5th wheel.
3.6 Folding
3.7 Positioning the Seat (Seat sold separately)
08
Step 6: Bring the top bag support brackets together, then lock
together using the button.
Step 1: Open the red fold lever to
release the handle.
Step 2: Press the button shown while
applying pressure down to close.
Step 3: Lower the cart down flat and close the red fold lever to
lock the handle.
Step 1: Using the bracket provided, feed it through as shown
in the picture.
Your cart will look like the below photo once the seat is installed.
For personal preference, the seat can be attached on either
side of the cart by inserting the seat bracket from the opposite
direction.
3.8 Attaching the Beverage Holder
The beverage holder can be installed in the upper or lower
bracket on the right side of the cart. Insert the pin of the
beverage holder and twist until it locks into place.
Step 2: Secure the bracket by adding the screw in the
position shown.
Step 3: You can now insert the seat into the bracket.
Hunter™ Quad User Manual 09
IMPORTANT: Press the seat with
your hand before sitting. Do not
use the seat on uneven surfaces.
Bag Boy does not warranty any
seat support brackets that are
damaged or bent
10
3.9 Attaching the Umbrella Holder
The umbrella holder is attached to the frame using the largest
bolt. Screw this into the frame as shown in the picture.
Your umbrella holder can be
adjusted backwards, forwards, and
to the side. The umbrella is secured
inside the umbrella holder by
tightening the plastic bolt located
near the top of the holder.
IMPORTANT: Do not leave your
umbrella up in the holder in windy
conditions. If the wind catches the
umbrella, it could cause your cart
to tip over and cause damage,
which will not be covered by
warranty
4.0 Battery Care
4.1 Before using your Quad cart for the first time, you must fully
charge your battery overnight.
To charge your battery:
• Unplug the battery from your cart [after play].
• Plug the charger into a power point,
• Plug the charger into the battery.
There are lights on the charger to help you understand the
charging process.
Table des matières
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur