Bacharach Monoxor Plus Manuel utilisateur

Carbon Monoxide Analyzer

Configuration and Operation Manual

Instruction 0019-9370

Revision 0

August 2013

Product Leadership •Training •Service •Reliability

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual

ii 0019-9370 Rev 0

WARRANTY POLICY

Bacharach, Inc. (Bacharach) warrants to the buyer that this product will be free from

material defects, free from manufacturing defects, and will conform substantially to

Bacharach’s applicable specifications at the time of delivery.

Bacharach’s liability and the buyer’s remedy under this warranty are limited to the

repair or replacement, at Bacharach’s option, of this product or parts thereof returned

to Bacharach and shown to Bacharach’s reasonable satisfaction to have been defective;

provided that written notice of the defect is given by buyer to Bacharach within two (2)

years after the date of delivery of this Product by Bacharach.

Bacharach warrants to the buyer that Bacharach will convey good title to this product.

Bacharach’s liability and the buyer’s remedy under this warranty of title are limited to:

the removal of any title defects or, at the election of Bacharach, the replacement of this

product or parts thereof that are defective in title.

The foregoing warranties are exclusive and are given and accepted in lieu of (I) any and

all other warranties, express or implied, including without limitation the implied

warranties of merchantability and fitness for a particular purpose: and (II) any

obligation, liability, right, claim or remedy in contract or tort, whether or not arising

from Bacharach’s negligence, actual or implied. The remedies of the buyer shall be

limited to those provided herein to the exclusion of any and all other remedies

including, without limitation incidental or consequential damages. No agreement

varying or extending the foregoing warranties, remedies or this limitation will be binding

upon Bacharach unless in writing and signed by a duly authorized officer of Bacharach.

www.MyBacharach.com

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual

0019-9370 Rev 0 iii

NOTICE

Product improvements and enhancements are continuous; therefore the

specifications and information contained in this document may change without

notice.

Bacharach, Inc. shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or

use of this material.

No part of this document may be photocopied, reproduced, or translated to

another language without the prior written consent of Bacharach, Inc.

BACHARACH, Fyrite, True Spot, Monoxor, and B-SMART are registered

trademarks of Bacharach, Inc. All other trademarks, trade names, service

marks and logos referenced herein belong to their respective companies.

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual

iv 0019-9370 Rev 0

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual Table of Contents

0019-9370 Rev 0 v

Table of Contents

Section 1. Overview.................................................................................... 1

1.1. Introduction ............................................................................................ 1

1.2. Conventions............................................................................................. 1

1.3. Safety....................................................................................................... 1

1.4. Product Overview.................................................................................... 2

1.5. Components ............................................................................................ 5

1.6. Features................................................................................................... 7

1.7. MonoxorPlus Sales Combinations ........................................................ 8

1.8. Specifications........................................................................................... 8

Section 2. Setup........................................................................................ 10

2.1. Connecting the Probe............................................................................ 10

2.2. Front Panel Buttons............................................................................... 11

2.3. Power Options....................................................................................... 12

2.4. Turning On the MonoxorPlus ............................................................. 13

Section 3. Configuration ........................................................................... 14

3.1. Menu Structure Overview ..................................................................... 14

3.2. The Warm-up Sequence........................................................................ 14

3.3. Main Menu ............................................................................................ 15

3.4. Ambient CO Menu................................................................................. 16

3.5. Differential Temperature Menu ............................................................ 17

3.6. Memory Options Menu......................................................................... 18

3.7. Setup Menu........................................................................................... 19

3.8. Calibration Menu................................................................................... 27

3.9. Diagnostics Menu.................................................................................. 28

3.10. Status Menu ........................................................................................ 29

Section 4. Operation................................................................................. 30

4.1. Overview ............................................................................................... 30

4.2. Taking a Gas Sample.............................................................................. 30

4.3. The RUN and Hold Screens.................................................................... 31

4.4. CO Trending Graph................................................................................ 32

4.5. Ending a Test ......................................................................................... 32

4.6. Taking Differential Temperature Measurements.................................. 33

4.7. Timed Ambient CO Testing.................................................................... 34

4.8. Printing Using the Optional IrDA Printer ............................................... 35

4.9. Turning Off the Analyzer ....................................................................... 37

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Table of Contents Monoxor



Plus Manual

vi 0019-9370 Rev 0

4.10. PC Interface and FyriteUser Software .............................................. 37

Section 5. Calibration and Maintenance .................................................. 38

5.1. Serviceability ......................................................................................... 38

5.2. Cleaning the Probe ................................................................................ 38

5.2.1. Equipment Required ................................................................. 39

5.2.2. Procedure ................................................................................. 39

5.3. Filter Replacement ................................................................................ 40

5.4. CO Sensor Replacement ........................................................................ 41

5.4.1. Accessing the CO Sensor........................................................... 41

5.4.2. Material Required (As Needed) ................................................ 41

5.4.3. CO Sensor Replacement Procedure.......................................... 42

5.4.4. B-SMARTCO Sensor Replacement.......................................... 42

5.5. Temperature Calibration ....................................................................... 43

5.5.1. Materials Required ................................................................... 43

5.5.2. Temperature Calibration Procedure......................................... 43

5.6. CO Sensor Calibration............................................................................ 45

5.6.1. Materials Required ................................................................... 45

5.6.2. CO Manual Zero Procedure ...................................................... 45

5.6.3. CO Sensor Span Procedure ....................................................... 46

5.7. T-Ref Sensor Calibration........................................................................ 47

Section 6. Troubleshooting....................................................................... 48

6.1. Error and Warning Messages ................................................................ 48

6.2. Replacement Parts ................................................................................ 49

6.3. Accessories ............................................................................................ 49

6.4. Instrument Identification ...................................................................... 50

6.5. Service Centers...................................................................................... 51

Declaration of Conformity ................................................................................. 53

∇∇∇

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual Overview

0019-9370 Rev 0 1

Section 1. Overview

1.1. Introduction

Thank you for investing in a Bacharach MonoxorPlus carbon monoxide (CO)

analyzer. To assure proper use and operator safety, please read the contents

of this manual for important information on the operation and maintenance of

the analyzer.

1.2. Conventions

WARNING:

A warning statement denotes a potential hazard

associated with the use of this equipment. Failure to follow this

information could result in serious personal injury or death.

CAUTION: A caution statement indicates a potentially hazardous

situation which, if not avoided, may result in minor or moderate

injury. Caution statements may also be used to alert against

unsafe practices.

IMPORTANT: An important statement provides emphasis of an

important feature, operation, etc. Failure to follow this

information could void your warranty

, result in improper

operation, or cause equipment damage.

NOTE: A note statement provides emphasis of a feature,

operation, practice, etc.

1.3. Safety

WARNING: This analyzer is not intended to be used as a safety

device.

WARNING: When testing an appliance, a full visual inspection of

the appliance should be performed to ensure its safe operation.

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Overview Monoxor



Plus Manual

2 0019-9370 Rev 0

CAUTION: This analyzer is not

intended to be used on a

continuous basis.

CAUTION: Do not store instrument or its sensors with solvents or

products that contain solvents.

CAUTION: Except for sensor and battery replacement

, this

analyzer should only be opened and/or serviced by authorized

Bacharach personnel. Failure to comply may void the warranty.

HAZARDOUS AREA WARNING:

This instrument has not been

designed to be intrinsically safe for use in areas classified as

hazardous locations. For your safety, DO NOT

use it in hazardous

(classified) locations.

CAUTION: Do not use flammable or combustible substances (like

carburetor fluid used for cleaning the probe) near an open flame.

CAUTION:

When the instrument is used in an inefficient oil-fueled

appliance where there is a high emission of soot, the probe’s

sample filter may become clogged. Before every use check the

filter to confirm it is clean or replace it with a new filter.

To prevent soot intake and a clogged filter, a smoke test should be

performed before operating under such conditions. This ensures

that the furnace or boiler is burning at a level appropriate for the

use of this instrument.

1.4. Product Overview

The MonoxorPlus is a portable hand-held carbon monoxide analyzer for use

in residential and light commercial applications. It is intended to be used by:

•HVAC contractors

•home inspectors

•maintenance personnel

•safety inspectors

to detect and display concentrations of carbon monoxide (CO) gas between

0 and 2000 ppm. The analyzer is capable of testing for CO in both ambient

room air and in the flue-gas stream of fossil-fuel fired furnaces and boilers.

A backlight enables the operator to read the display in dimly-lit areas. The

displays and menus are available in multiple languages (English, French and

Spanish).

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Monoxor



Plus Manual Overview

0019-9370 Rev 0 3

The analyzer detects and displays the presence of CO by first drawing in a gas

sample from the area being tested by the analyzer’s built-in motorized pump.

The gas sample is next directed into a sensor chamber where the sample is

analyzed for the presence of CO. If CO is detected, the CO ppm level is given on

the analyzer’s main display. A trending screen (accessible from the RUN

screen by using the right or left arrow key) shows dynamic CO levels graphed

over a programmable time period (from 30 seconds to 15 minutes). In addition

to the visual notifications, you can set a CO alarm limit, above which an audible

alarm buzzer will beep repeatedly.An audible alarm with a slower beep

frequency occurs when the batteries are low.

A permanent record of the detected CO level, along with the current time and

date, can be made by using the optional wireless IrDA printer. Test records can

also be saved in memory.

The Monoxor® Plus can calculate a differential temperature based on two

sampled temperatures (T1 and T2). After you take the two sample readings,

the differential value (T1-T2) is calculated, optionally saved in memory,

displayed on the main run screen, and is shown on printouts.

An ambient CO feature takes approximately 15 minutes to complete and

provides a minute-by-minute snapshot of CO readings, as well as a “Max CO”

value that represents the highest CO reading measured during the entire test.

Results can be saved to memory and/or printed. Use the optional CO

Appliance Kit (P/N 0024-8555) to perform an ambient CO measurement.

A calibration reminder can be set to occur every 6, 8, 10, 12, or 15 months after

the last calibration. (Select “Never” to disable this feature.) Regular calibration

periods of 6 months to 1 year are recommended. The calibration reminder

value sets a time period after which the analyzer displays a calibration

reminder message during warm-up.

To avoid the need for manual CO sensor calibrations, the B-Smart® Sensor

program is supported with the MonoxorPlus. After enrolling in the program,

pre-calibrated replacement B-Smart® CO sensors are shipped at pre-

determined intervals of your choice.

•Choose a program start date that best suites your needs.

•Receive a pre-calibrated B-Smart® sensor.

•Return your old sensor in a returnable, pre-labeled container.

Benefits include no downtime, self calibration, convenience, and cost savings.

For additional information about the B-Smart® Calibration Program, contact

Bacharach at 1-800-736-4666 or email Help@MyBacharach.com.

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Overview Monoxor



Plus Manual

4 0019-9370 Rev 0

A programmable inactivity timeout causes the analyzer to initiate shutdown

mode if no key presses occur for the specified time period. If the analyzer

initiates automatic shutdown or is turned OFF manually while a high level of CO

is still present within the unit, the automatic CO purge feature forces the

analyzer’s pump to remain on until the detected CO level drops below 50 ppm.

The instrument is supplied with the following components:

•probe and hose assembly

•four disposable “AA” alkaline batteries

•hard carrying case

•factory-calibrated and installed CO sensor.

Depending on the model and kit, some or all of the following components are

included:

www.GlobalTestSupply.com

Quality Bacharach Products Online at: sales@GlobalTestSupply.com

Autres manuels pour Monoxor Plus

Table des matières

Autres manuels Bacharach Instrument de mesure

Bacharach

Bacharach Fyrite INSIGHT Manuel utilisateur

Bacharach

Bacharach MANOMETER GAS PRESSURE GAUGE Manuel utilisateur

Bacharach

Bacharach Fyrite INTECH Manuel utilisateur

Bacharach

Bacharach HGM300 Mode d’emploi

Bacharach

Bacharach SF6 Portable Monitor Manuel utilisateur

Bacharach

Bacharach MGS-401 Manuel utilisateur

Bacharach

Bacharach HGM-MZ Mode d'emploi

Bacharach

Bacharach HGM-MZ Manuel utilisateur

Bacharach

Bacharach Gas Pup Manuel utilisateur

Bacharach

Bacharach Neutronics Mini-ICS Manuel utilisateur

Bacharach

Bacharach PCA 2 Manuel de la liste des pièces

Bacharach

Bacharach PUR-CHEK PRO Manuel utilisateur

Bacharach

Bacharach Ultra MAC 2000 Series Manuel de l'installateur

Bacharach

Bacharach High Flow Sampler Manuel utilisateur

Bacharach

Bacharach 300 Manuel utilisateur

Bacharach

Bacharach Comfort Chek 400 Manuel utilisateur

Bacharach

Bacharach PCA 400 Manuel utilisateur

Bacharach

Bacharach Parasense 3300RM2 Manuel

Bacharach

Bacharach Fyrite INSIGHT PLUS Manuel utilisateur

Bacharach

Bacharach Fyrite Tech 50 Manuel d'exploitation et d'entretien

Bacharach

Bacharach Fyrite InTech 0024-8510 Manuel utilisateur

Bacharach

Bacharach MONOXOR XR Manuel utilisateur

Bacharach

Bacharach 2825 Manuel d'exploitation et d'entretien

Bacharach

Bacharach Draftrite Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur