Babybee Prams Comet Manuel utilisateur
babybee comet
instruction manual
Please keep in a safe place for future reference
Contact babybee prams by emailing
www.babybeeprams.com.au
0202
Hello!
Thank you for choosing the babybee Comet.
Before you get started, there’s a few quick things we’d like you to note:
Return Policy
Keep in mind that we offer a 9 month free return policy. If for whatever
reason this isn’t the perfect product for you, please email us at
process to return your purchase free of charge.
Please note that as per our returns policy will only accept returns where
the product is in its original condition (with no signs of use) and in all
original packaging including box and protective plastics and
cardboard. Please take care when unpacking and assembling and
ensure you keep all packaging components in a safe place and out of
reach of any children.
Support
If at any stage you require any assistance with setup or use, please
email us for assistance. Alternatively we have an assembly
demonstration video which you can access via our website.
Warranty
Rest assured that our travel systems come with an 18 month warranty to
cover against faults in materials and workmanship when your products
are used under normal conditions, according to our manuals and
technical specications. Please refer to page 14 for further information.
Keep in touch
We love nothing more than seeing our customers with the Comet in
action so we hope you connect with us soon via one of our social
media channels!
Enjoy the ride!
The babybee team
0303
Safety First
The safety of you and your family is our number one priority. Please take
the time to carefully read this manual in full, and keep it in a safe place
for future reference.
If you require any assistance please don’t hesitate contact us by
emailing [email protected]
Tested to comply with the Australian Safety Standard:
“AS/NZS 20088:2013 Pram and Stroller – Safety Requirements”
WARNING!
With the exception of the outer cardboard packaging, to prevent injury
from choking, remove and immediately move out of reach, all
protective packaging. Never leave your child unattended with the
travel system or packaging.
Using your Comet
What’s in the box............................................................................... 04
Get to know your Comet - Terminology.......................................... 05
Step 1: Install the brake and wheels................................................ 06
Collapsing the frame......................................................................... 07
Step 2: Attach/release bassinet to the frame................................ 08
Step 3: Attach the canopy............................................................... 09
Rear brake, front swivel wheels and adjusting the push-bar........ 10
Switching from bassinet to stroller seat............................................ 11
Seat position and 5 point safety harness......................................... 12
Setting up your bassinet..................................................................... 13-14
Setting up the canopy....................................................................... 15
Maintainence and cleaning............................................................. 16
Warranty.............................................................................................. 17
Safety warnings.................................................................................. 18-20
04
A. Frame/chasis
B. Push-bar organiser
C. Foot muff
D. Bassinet & seat frame
E. Bassinet base board
F. Seat liner
G. Canopy
H. Seat fabric
I. Bassinet mattress
J. Front swivel wheels
K. Rear wheels
L. Bassinet & seat belly bar
M. Brake
N. Rain cover and mosquito net
O. Bassinet apron
What’s in the box
please note:
depending on your order, you may recieve 2 boxes
05
A. Canopy with magnetic peekaboo
B. Bumper bar
C. 5 point safety harness
D. Seat liner
E. Seat frame (same as o)
F. Front swivel wheel lock
G. Front swivel wheel
H. Bassinet/Seat frame release
I. Seat recline buttons
J. Frame release clips (to release from folded position)
K. Push-bar
L. Bassinet apron
M. Push-bar height adjustment buttons
N. Frame collapse levers
O. Bassinet frame (same as e)
P. Shopping basket
Q. Rear wheels
R. Brake
Get to know your new Comet –
Terminology
06
Step 1: Install the brake and wheels
1. To release the frame from the folded position, simultaneously
pull back on the black frame release clips and lift. These clips can be
found either side of the frame.
2. When the frame is fully open you will hear a “click”.
3. At the rear of the frame, take the brake attachment section
and attach this to the frame. Push down until you feel a ‘click’ and
when you can see the two sliver locking pins in place.
4. Now you’re ready to attach the large rear wheels. Push each
wheel onto the pin until you hear a “click”.
5. Move around to the front wheel location and insert each front
wheel pin into the socket until you hear a “click”.
6. With all of the wheels now in place, individually pull them just to
make sure they are all securely held in place.
07
Practice collapsing the frame from this position
1. Hold the push-bar against your body for support.
2. To fold the frame, pull up on the 2 black frame collapse levers
located on both sides of the frame while pressing the safety button
underneath (only on the right lever).
3. Once pulled up, press downwards on the frame and it will
collapse on itself.
4. Make sure the black frame release clips have clicked in to
place to secure it from opening again.
To release the pram as you did in step one, simply pull back on those
same black frame release clips and pull the frame up until it clicks into
place. Practice this a few times so you’ve got the hang of it.
Don’t worry it will become second nature in no time!
Also note that the pram can be collapsed with the seat attached when
in the forward facing position, however the bassinet will need to be
removed rst.
08
Step 2: Attach/release the bassinet to the frame
1. Select which direction you’d like the bassinet to face and simply
click it on to the side frame connectors.
Step 3: Assemble your bassinet
1. Place the bassinet base board into the bottom of the bassinet,
and secure with the velcro tabs at each end. Once secured, simply
place bassinet mattress ontop.
2. To release simply push the grey bassinet frame release buttons,
in the direction of the arrow, and off it pops!
2. Now it’s time to zip on the bassinet apron, the zip may seem a
little stiff at rst, this will soften over time. Attach the bumper bar to the
bassinet. Ensure you hear a ‘click’ so you know it’s securely attached.
To release the bumper bar, simply press the release buttons located on
both sides.
09
Step 3: Attach the canopy
1. Your canopy should come pre-assembled. To attach it to the
frame, rst secure the bottom side of the connector to the frame, then
pull and clip the topside over and into place. Repeat on other side.
Make sure the connectors are as close to the middle of the frame as
they can be (as shown in the pictures below, there should be no gap
between the bumper bar and the canopy connectors).
2. You may wish to have the front peak of the canopy ipped
forward to provide a little extra protection
3. Finally pull the fabric over the bassinet into place.
Your bassinet is now set up and ready to use!
WARNING!
Only use the bassinet in a at position. Do not recline.
10
Please take note of the following 3 features before you get going
Rear brake
When stopping, use the brake at all times by pressing down on the
black bar with your foot until you feel it click into place. To start
travelling again, lift the bar up with your foot and off you go!
Front swivel wheels
When travelling along straight surfaces the front wheels may spin or
cause “wheel shudder”. To lock the front swivel wheels into place
simply press down on the grey buttons at the front of the wheel. To go
back to 360° swivel mode simply press the buttons up again.
Adjusting the push-bar height
To adjust the push-bar height, simply press both of the grey buttons at
the same time and select your height.
Table des matières
