Page 2of 2
We recommend using B-G Instruments' type TP-4 thermal
paper in the DataPlot model PM 1416 Print Mechanism. This
paper produces a stable black on white image. Unlike some
waxy coated papers, it does not stick to or-cause material to
build-up on the printhead. TP-4 is a 4.5 inch wide, high quality
facsimile grade paper that can produce high resolution
permanent copy in the PM 1416 printer. It is available from
B-G Instruments in cartons of 24 rolls, or larger quantities.
CAUTION --- PRINTHEAD DAMAGE
The DataPlot CB 1416 and CB 1100 Control Boards apply
power to the selected thermal dots for a period of time
sufficient to exceed the thermal paper activation temperature,
orabout 2 milliseconds. If electrical power is applied to these
elements for a significantly longer period, or for too high a
duty cycle, or in any other improperly controlled manner,
irreversible printhead damage may occur. Such damage can be
readily detected, as the affected dots will print only lightly, if
at all, and isnot covered by warranty. For this reason, it is
important that the print mechanism be operated only by the
DataPlot model CB 1416 or CB 1100 Control Board and that
the applied power be as specified in the control board's
Technical Data and Instructions Sheet.
Locations and dimensions for panel
mounting holes and paper exit
cutout are shown at the left. We
recommend inserting a transparent
tear-off bar in this cutout. Contact
B-G Instruments for further
information.
The paper supply roll
compartment is usually covered by
a removable door set flush in the
front panel and secured by captive
screws to the two leftmost nut
inserts shown.
Brackets are also available from
B-G Instruments for attaching the
printer control board to the rear of
the print mechanism.
ALTERNATE PAPER SUPPLY HOLDERS
The PM 1416 print mechanism is available in several versions,
varying only in the manner of holding the paper supply roll.
The version pictured in this data sheet is model PM
1416-PTVF, one of the more popular versions, that holds the
paper roll in a front-loading tray. We also offer these
mechanisms fitted with a rear-loading tray,. an axle paper roll
mount or a spring holder. Upon your request, drawings of the
other standard configurations will be sent to you by phone or
fax. Other paper supply holding fixtures have been designed
for other customers with special mounting requirements. Let
us know what works best in your application.
WARRANTY
B-G Instruments will repair or replace, at its option, any model
PM 1416 Print Mechanism that malfunctions because of faulty
manufacture within one year after its original date of sale,
provided that the mechanism has been used exclusively with a
properly functioning CB 1416 or CB 1100 Control Board (or
other control board specifically authorized by B-G Instruments)
and B-G Instruments' type TP-4 thermal Paper, and:
1. neither the print mechanism nor its control board have been
modified in any way not specifically authorized by B-G
Instruments, Inc., and
2. electrical power applied to the control board has
always been within specifications for that board, and
3. the mechanism shows no evidence of electrical, thermal
or mechanical damage, and
4. the mechanism has printed fewer than 100 million dot
rows and less than 100,000 feet of paper.
13607 E. Trent,
Spokane Valley, WA 99216, U.S.A.
www.bginstruments.com
Toll Free: (888) 244-4004
Phone: (509) 893-9881
Fax: (509) 893-9803
