Azbil MCF0080 Manuel utilisateur

MCF

Air Flowmeter

User's Manual

for

Installation and Configuration

No. CP-SP-1276E

Thank you for purchasing the MCF.

This manual contains information for

ensuring the correct use of the MCF. It

also provides necessary information for

installation, maintenance, and trou-

bleshooting.

This manual should be read by those

who design and maintain equipment

that uses the MCF. Be sure to keep this

manual nearby for handy reference.

The µFTM, Micro Flow and µF sensor are a trademark of Azbil Corporation in

Japan.

NOTICE

Be sure that the user receives this manual before the product is used.

Copying or duplicating this user’s manual in part or in whole is forbid-

den. The information and specifications in this manual are subject to

change without notice.

Considerable effort has been made to ensure that this manual is free

from inaccuracies and omissions. If you should find an error or omis-

sion, please contact the azbil Group.

In no event is Azbil Corporation liable to anyone for any indirect, special

or consequential damages as a result of using this product.

Conventions Used in This Manual

■To prevent injury to the operator and others, and to prevent property damage, the following types of safety

precautions are indicated:

■In describing the product, this manual uses the icons and conventions listed below.

Use caution when handling the product.

The indicated action is prohibited.

Be sure to follow the indicated instructions.

Handling Precautions:

Handling Precautions indicate items that the user should pay attention to when

handling the MCF.

Note:Notes indicate information that might benefit the user.

:This indicates the item or page that the user is requested to refer to.

(1), (2), (3): Numbers within parentheses indicate steps in a sequence or parts of an

explanation.

>>: Indicates the result of an operation, details displayed on the personal computer or

other devices, or the state of the device after operation.

WARNING Warnings are indicated when mishandling this product might result in

death or serious injury.

CAUTION Cautions are indicated when mishandling this product might result in

minor injury to the user, or only physical damage to the product.

WARNING

Never allow gases that are within explosive limits to pass through this device. Doing so could

result in an explosion.

Do not use this device for oxygen gas. Doing so could result in a serious accident.

Safety Precautions

CAUTION

Be sure to use this device within the flow rate range stated in the specifications. To prevent

excessive flow, use a suitable means to control the supply pressure or use a throttle valve or

the like to control the flow rate.

If damage could result from the abnormal functioning of this device, include appropriate redun-

dancy in the system design.

If there is a risk of a power surge caused by lightning, use Azbil Corporation's SurgeNon to

prevent possible fire or equipment failure.

When carrying the flowmeter or connecting it to the pipe, do not hold it by the measurement

module. Doing so could cause damage, or the device could drop, causing an injury.

To avoid damaging this device, do not use it outside of the operating pressure range. Also, do

not subject it to a pressure above its pressure resistance.

When maintaining or replacing the measurement module, release the internal pressure of this

device before removing the measurement module.

The Role of This Manual

iii

Three manuals are available for the MCF. Read appropriate manuals according to your requirements. If you do not

have a required manual, contact the azbil Group or your dealer. Additionally, you can download necessary manuals

from http://www.azbil.com.

ser'sM

anual

P-UM-0

WARNING

AUTI

WARNING

AUTI

MCF Air Flowmeter User's Manual for Installation

Manual No. CP-UM-5498JE

This manual is supplied with the device. Personnel in charge of design and/or

manufacture of a system using this device must thoroughly read this manual.

This manual describes the safety precautions, installation, wiring, list of

parameters, and primary specifications.

MCF Air Flowmeter User's Manual for Installation and Configuration

Manual No. CP-SP-1276E

This manual. The manual describes the hardware and all functions of this

device. Personnel in charge of design, manufacture, operation, and/or main-

tenance of a system using this device must thoroughly read this manual. It

describes installation, wiring, functions and settings, operating procedures,

troubleshooting, and specifications.

MCF Air Flowmeter User's Manual for Communication Functions

Manual No. CP-SP-1300E

Those using the "communication functions" of the MCF series should read

this manual.

This manual describes an outline of communications, wiring, communication

procedures, a list of MCF series communication data, how to remedy trouble,

and communication specifications.

Contents

Conventions Used in This Manual

Safety Precautions

The Role of This Manual

Chapter 1. OVERVIEW

■Summary•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••1

■Features •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••1

■Model selection guide••••••••••••••••••••••••••••••••••••••••••••••••••••2

■Optional parts (sold separately)••••••••••••••••••••••••••••••••••••••••••2

Chapter 2. PART NAMES AND FUNCTIONS

■Parts name and functions••••••••••••••••••••••••••••••••••••••••••••••••3

Chapter 3. MOUNTING AND WIRING

■Installation location ••••••••••••••••••••••••••••••••••••••••••••••••••••••4

■Excessive flow rate ••••••••••••••••••••••••••••••••••••••••••••••••••••••4

■Piping ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••5

■Wiring•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••13

Chapter 4. FUNCTIONS

■Display••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••15

■Flow rate display unit •••••••••••••••••••••••••••••••••••••••••••••••••••15

■Output (4 to 20 mA output models MCF_______D01____ only) ••••••16

■Integration function•••••••••••••••••••••••••••••••••••••••••••••••••••••16

■Event output (

4 to 20 mA output models MCF_______D01____ only

)•••16

■Event function

(

RS-485 communications models MCF_______D10____ only

)

•••17

■Operating pressure selection •••••••••••••••••••••••••••••••••••••••••••18

■Reference temperature selection •••••••••••••••••••••••••••••••••••••••18

■Low flow cutoff •••••••••••••••••••••••••••••••••••••••••••••••••••••••••18

■Self-diagnosis function •••••••••••••••••••••••••••••••••••••••••••••••••18

■Data storage ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••18

■Integration options for backflow ••••••••••••••••••••••••••••••••••••••••19

■Reverse flow measurement •••••••••••••••••••••••••••••••••••••••••••••20

■Expansion of flow rate range •••••••••••••••••••••••••••••••••••••••••••20

Chapter 5. SETTING AND OPERATION

■State transitions ••••••••••••••••••••••••••••••••••••••••••••••••••••••••21

■Function setup••••••••••••••••••••••••••••••••••••••••••••••••••••••••••22

■Parameter setup ••••••••••••••••••••••••••••••••••••••••••••••••••••••••25

■Device information display •••••••••••••••••••••••••••••••••••••••••••••29

■Other indications •••••••••••••••••••••••••••••••••••••••••••••••••••••••30

■Resetting integrated data •••••••••••••••••••••••••••••••••••••••••••••••30

■Maintenance mode••••••••••••••••••••••••••••••••••••••••••••••••••••••30

Chapter 6. MAINTENANCE AND TROUBLESHOOTING

■Maintenance ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••33

■Troubleshooting ••••••••••••••••••••••••••••••••••••••••••••••••••••••••35

Chapter 7. SPECIFICATIONS

■General specifications ••••••••••••••••••••••••••••••••••••••••••••••••••37

■Environmental conditions ••••••••••••••••••••••••••••••••••••••••••••••39

■External dimensions ••••••••••••••••••••••••••••••••••••••••••••••••••••40

■Pressure loss •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••43

Chapter 1. OVERVIEW

■Summary

The MCF air flowmeter uses a µF (Micro Flow) sensor in its sensing unit. The µF

sensor is a thermal flow speed sensor which uses proprietary technology.

Integrating this ultra-miniature flow speed sensor with high-grade channel design

technology has achieved high accuracy and wide rangeability.

■Features

•Incorporates a thermal flow speed Micro Flow sensor. With the silicon micro-

machining and the thin-film forming technologies, the µF sensor is a mere 1.7

mm square and 0.5 mm thick, and features high sensitivity and fast response.

•Because this device is a mass flowmeter, its readings are not affected by temper-

ature or pressure.

•The MCF with 4 to 20 mA output provides instantaneous flow rate and inte-

grated flow display, and provides analog current output for instantaneous flow

rate, as well as event outputs for integration pulse or alarms.

The MCF with RS-485 communications provides instantaneous flow rate, inte-

grated flow display and RS-485 communications function.

•A bypass structure using orifices affords a wider flow rate range per pipe size

than previous mass flowmeters, with low pressure loss.

•Dust tightness is improved by the bypass structure and flow path design.

•Self-diagnostic function for easy handling of malfunctions.

•Measurement module is detachable, so maintenance can be done without remov-

ing the flowmeter.

•Measurement module can be swapped between the MCF0250, MCF0400 and

MCF0500.

•Display unit can be rotated, for viewing from the desired direction.

mode

enter

ALEVLL/min

MCF

Measurement module

(MCF0250, MCF0400 and MCF0500 are interchangeable)

Display unit can be rotated and fixed at the desired angle.

Main flow path

Display unit

■Model selection guide

■Optional parts (sold separately)

Basic

Pipe size

Material Connected Gas type Power Option Option Option Design Description

model

Flow rate

/output/ (1) (2) (3) code

number

range

communications

MCF MCF Air flowmeter

0080

8A (1/4B), 200L/min, full scale

0150

15A (1/2B), 500L/min, full scale

0151

15A (1/2B), 1000L/min, full scale

0250

25A (1B), 3000L/min, full scale

0400

40A (1 1/2B), 3000L/min, full scale

0500

50A (2B), 12000L/min, full scale

ABody: aluminum alloy

Rubber: HNBR

FBody: aluminum alloy

(Degreasing treatment *1)

Rubber: FKM

RRc thread

GGthread

NAir/nitrogen

D01 24 Vdc power, 4 to 20 mA

output, one event output

D10 24 Vdc power, RS-485

0None

. 0 None

Inspection certificated provided

YWith traceability certification

0Product version

Name Model number Description

Mounting bracket 81446721-001 For MCF0080/0150/0151/0250

Measurement module 81447192-201 For MCF____A_ND01____ For MCF0250/0400/0500

81447192-221 For MCF____A_ND10____

81447192-401 For MCF____F_ND01____

81447192-421 For MCF____F_ND10____

Chapter 1. OVERVIEW

Name Model number Cable Cable Lead color

length properties

Cable with connector PA5-4ISX2MK-E 2m Oil resistant, bend-tolerant

exclusive for MCF PA5-4ISX3MK-E 3m Flame-resistant cable

series PA5-4ISX5MK-E 5m UL2464 1: Brown

EN-compliant 2: White

PA5-4ISX2HK-E 2m Oil resistant 3: Blue

PA5-4ISX3HK-E 3m Flame-resistant cable 4: Black

PA5-4ISX5HK-E 5m UL2464

EN-compliant

Extension cable with PA5-4ISB2MK-E 2m Oil resistant, bend-tolerant

connector PA5-4ISB3MK-E 3m Flame-resistant cable

PA5-4ISB5MK-E 5m UL2464

EN-compliant

PA5-4ISB2HK-E 2m Oil resistant,

PA5-4ISB3HK-E 3m Flame-resistant cable

PA5-4ISB5HK-E 5m UL2464

EN-compliant

*1. page 38

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Azbil Instrument de mesure

Azbil

Azbil NWA300 Manuel utilisateur

Azbil

Azbil V8 Manuel utilisateur

Azbil

Azbil mF CMG Series Manuel utilisateur

Azbil

Azbil MagneW Neo PLUS Manuel utilisateur

Azbil

Azbil SR100 Manuel utilisateur

Azbil

Azbil MagneW FLEX+ Manuel utilisateur

Azbil

Azbil MagneW FLEX+ Manuel utilisateur

Azbil

Azbil MagneW Two-wire PLUS+ MTG15A Manuel utilisateur

Azbil

Azbil ACTIVAL FVY5137J Manuel utilisateur

Azbil

Azbil mF CMG Series Manuel utilisateur

Azbil

Azbil 700 series Manuel utilisateur

Azbil

Azbil MagneW 3000 Manuel utilisateur

Azbil

Azbil MCW400A100 Manuel utilisateur

Azbil

Azbil MVF Series Manuel utilisateur

Azbil

Azbil MCF Series Manuel utilisateur

Azbil

Azbil MCB10A Manuel utilisateur

Azbil

Azbil AUR355 Manuel d'utilisation et d'entretien

Azbil

Azbil mF MVF Series Manuel utilisateur

Azbil

Azbil SLP-F7M Manuel utilisateur

Azbil

Azbil mF MCF Manuel utilisateur

Azbil

Azbil CML 050 Manuel utilisateur

Azbil

Azbil SR Series Manuel utilisateur

Azbil

Azbil Micro Flow CMS9500 Manuel utilisateur

Azbil

Azbil CY8100C1000 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur