Axminster AC1950B Manuel utilisateur
Bandsaws
10,12,14 inch
AC1950B Code 105093
AC2305B Code 105094
AC2606B Code 105095
Original Instructions
AT&M: 04/02/2019
BOOK REF: 105742
AC1950B AC2305B
AC2606B
Index of Contents
2
Cert No: MJ3420, MJ3425,
MJ343C, MJ343B
Axminster Tools & Machinery Ltd
Axminster Devon
EX13 5PH UK
axminster.co.uk
Type Bandsaw
Model AC1950B, AC2305B, AC2606B and conforms to the machinery example for which the
EC Type-Examination Certificate No BM 50421300
has been issued by Laizhou Fulin Machinery Co., Ltd.
at:Wenchang Road Street Nanwuli Industry Yard Laizhou, Shandong261400
China
and complies with the relevant essential health and safety requirements.
2006/42/EC
EN 1807-1:2013
EN 60204-1:2006+A1+AC
06/42/EC - Annex I/05.2006
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
Signed
Andrew Parkhouse
Operations Director Date: 05/11/2018
The symbols below advise the correct safety procedures when using this machine.
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Dust mask
should be worn
EU Declaration of Conformity 02
What’s Included 03-04-05
General Instructions for 230V Machines 05
Specification 06
Assembly 06-07-08-09-10
Illustration and Parts Description 11-12-13-14-15-16
Setting Up the Saw 17-18-19-20-21-22
Operating Instructions 23
Changing the Saw Blade 24-25
Changing the Blade Speed 26
Maintenance 27
Bandsaw Blade Information 28-29
Bandsaw Trouble Shooting 30
UJK Bandsaw Buddy 31
Parts Breakdown/List 32-33-34-35-36-37-38
Wiring Diagram 39
What’s Included
3
Quantity Item Part
1 105093 Bandsaw A
Blade 1,950mm long,
mounted on saw but not
tensioned
Quantity Item Part
1 105094 Bandsaw B
Blade 2,305mm long,
mounted on saw but not
tensioned
Quantity Item Part
1 105095 Bandsaw C
Blade 2,606mm long,
mounted on saw but not
tensioned
Quantity Item Part
1 Craft Bandsaw Unit 1
1 Cast Iron Saw Table with Table Insert 2
1 Fence Guide Rail 3
1 Guide Fence Assembly 4
1 Extraction Port 5
1 Blade Tensioning Knob 6
1 Flexible Extraction Hose with Retaining Clips 7
1 Angled Pin and Nut 8
1 Push Stick 9
4 Long Bolts Washers & Nut 10
3 Hex Keys 11
Floor Stand Comprising
4 Leg Brackets 12
2 Long Upper Support Struts 13
2 Short Upper Support Struts 14
2 Long Lower Support Struts 15
2 Short Lower Support Struts 16
4 Threaded Rubber Feet 17
1 Floor Stand Bag of fixings 18
Optional Accessories
1 Mitre Fence (code 104928) 19
Model Number AC1950B Model Number AC2305B Model Number AC2606B
Continues over...
A B C
What’s Included
4
1
2
8
910
11 19
4
3
5
6
7
Optional Accessory
What’s Included
5
12
13 14
15
16
18 17
General Instructions for 230V Machines
The following will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain
your tools and equipment in good working order.
WARNING!! KEEP TOOLS AND EQUIPMENT
OUT OF REACH OF YOUNG CHILDREN
Mains Powered Tools
• Tools are supplied with an attached UK 13 Amp plug.
• Inspect the cable and plug to ensure that neither are
damaged. Repair if necessary by a suitably qualified person.
• Do not use when or where it is liable to get wet.
Workplace
• Do not use 230V a.c. powered tools anywhere
within a site area that is flooded.
• Keep machine clean.
• Leave machine unplugged until work is about to commence.
• Always disconnect by pulling on the plug body and not the
cable.
•Carry out a final check e.g. check the cutting tool
is securely tightened in the machine and the correct
speed and function set.
•Ensure you are comfortable before you start work,
balanced, not reaching etc.
•Wear appropriate safety clothing, goggles, gloves,
masks etc.Wear ear defenders at all times.
•If you have long hair wear a hair net or helmet to prevent it
being caught up in the rotating parts of the machine.
•Consideration should be given to the removal of rings and
wristwatches.
•Consideration should also be given to non-slip footwear etc.
•If another person is to use the machine, ensure they are
suitably qualified to use it.
•Do not use the machine if you are tired or distracted
•Do not use this machine within the designated safety areas
of flammable liquid stores or in areas where there may be
volatile gases.
•Check blades are correct type and size, are undamaged
and are kept clean and sharp, this will maintain their
operating performance and lessen the loading on the
machine.
•OBSERVE…. make sure you know what is happening
around you and USE YOUR COMMON SENSE.
KEEP WORK AREA AS UNCLUTTERED AS IS
PRACTICAL. UNDER NO CIRCUMSTANCES SHOULD
CHILDREN BE ALLOWED IN THE WORK AREA.
HAVING UNPACKED YOUR SAW (SEE BELOW) AND ITS ACCESSORIES PLEASE DISPOSE OF ANY
UNWANTED PACKAGING PROPERLY. THE CARDBOARD PACKAGING IS BIODEGRADABLE.
Specification
6
Code 105093
Model AC1950B
Rating Craft
Power (Output) 550 W
Blade Speed 660 & 840 m/min
Blade Length 1,950mm
Blade Width Min/Max 6 mm to 13 mm
Max Width of Cut 260 mm
Max Width of Cut with Fence 185 mm
Table Size 350 x 330 mm
Table Height on Stand 1,035 mm
Table Tilt 0° - 45°
Dust Extraction Outlet 63 mm
Overall L x W x H 790 x 620 x 1,570 mm
Weight 39 kg
Code 105094
Model AC2305B
Rating Craft
Power (Output) 750 W
Blade Speed 360 & 720 m/min
Blade Length 2,305mm
Blade Width Min/Max 6 mm to 16 mm
Max Width of Cut 315 mm
Max Width of Cut with Fence 208.5 mm
Table Size 400 x 500mm
Table Height on Stand 1,035 mm
Table Tilt 0° - 45°
Dust Extraction Outlet 100 mm
Overall L x W x H 700 x 890 x 1,623mm
Weight 66kg
Code 105095
Model AC2606B
Rating Craft
Power (Output) 1.1 kW
Blade Speed 600 & 840 m/min
Blade Length 2,606mm
Blade Width Min/Max 6 mm to 25 mm
Max Width of Cut 360 mm
Max Width of Cut with Fence 260 mm
Table Size 480 x 550 mm
Table Height on Stand 1,060 mm
Table Tilt 0° - 45°
Dust Extraction Outlet 100 mm
Overall L x W x H 980 x 630 x 1,740 mm
Weight 85 kg
Assembly
Stand Assembly
Step 1 Step 2
14
14
12
18
16
Assembly
7
Mounting the Bandsaw to the Stand
Step 3
Step 4
Step 5
Step 6
15
13
12
17
Lift the saw on to the stand, secure using four long bolts, nuts
and washers (10). Insert the bolts through the pre-drilled holes
in each corner of the base and through the floor stand. Fit the
washers and nuts on the underside and tighten to secure the
assembly.
WHEN MOUNTING THE UNIT,WE
STRONGLY ADVISE YOU GET THE
ASSISTANCE OF ANOTHER PERSON
AS THE BANDSAW IS HEAVY.
10 1
Assembly
8
Mounting the Saw Table
Locate the blade tensioning knob (6) and insert it down over
the control shaft ,on top of the bandsaw housing, see fig 01.
1) The saw table can be fitted without removing the blade.
However, if you would feel more comfortable not having to
manoeuvre the table around the blade, remove the blade by
opening the top and bottom covers, release the tension on
the blade by backing off the tensioning wheel, see fig 02-03.
Fig 01
6
Fig 02-03 2) Locate the cast iron table (2), remove the table stabilising
bolt and the table insert, see fig 04-05. Angle the tilt quadrant
assemblies base by loosening the two lift and shift handles
beneath the table in readiness for mounting, see fig 06-07.
Fig 04-05
Table stabilising bolt
Table insert removed
Fig 06-07
3) Remove the bolts, washers/spring washers from the
bandsaws mounting plate and place safely aside, see fig 8-9.
Lift the table (2), slide the blade through the table,s slot and
2
Assembly
9
Fence Assembly
lower it onto the mounting plate, see fig 10. Line up the holes in
the tilt quadrant with the ones in the mounting plate, replace
the bolts/washers and tighten. Lower the table down on its
stop, replace table insert and stabilising bolt, see fig 11-12-13.
Fig 08-09
Fig 10-11-12-13
DO NOT OVERTIGHTEN!
1) Locate the guide fence rail (3) and guide fence assembly (4).
Loosen the bolts beneath the table (2), giving enough
clearance between the table and bolts. Line up machined
slots in the fence rail (3) and slide the rail up against the table.
Nip up the bolts to secure the rail, see fig 14-15-16.
Fig 14-15-16
3
Loosen bolts
Continues over...
Assembly
10
2) Locate the guide fence assembly (4), lowering the fence
down over the fence rail (3) and press down the locking lever
to secure the fence in position, see fig 17-18.
1) Find the extraction port (5), flexible hose and retaining clips
(7). Remove the four Phillips screws around the extraction
outlet beneath the table. Line up the holes in the extraction
port (5) and secure with the Phillips screws, see fig 19-20-21.
Fig 17-18
Extraction Port & Hose Assembly
Fig 19-21-21
4
3
5
5
Fig 24-25
Fig 22-23
2) Place a retaining clip over the end of the hose (7), slide the
hose over the port (5) and tighten the clip. Repeat for the lower
extraction port, see fig 22-23.
3) Locate the angled pin and nut (8) and push stick (9).Screw
the nut onto the threaded pin then screw the pin into the
threaded hole to the rear of bandsaw and tighten with a
spanner. Slot the push stick (9) over the pin, see fig 24-25.
8 9
Retaining clip
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Axminster Scie
Axminster
Axminster PROFESSIONAL AP406SS Manuel utilisateur
Axminster
Axminster AWHBS350N Manuel utilisateur
Axminster
Axminster Professional AP1854B Manuel utilisateur
Axminster
Axminster WorkShop AW2305B Manuel utilisateur
Axminster
Axminster AWMS10 Manuel utilisateur
Axminster
Axminster AW10BSB2 Manuel utilisateur
Axminster
Axminster TSCE-12R Manuel utilisateur
Axminster
Axminster UE-125DV Manuel utilisateur
Axminster
Axminster AW405FS Manuel utilisateur
Axminster
Axminster AWVFS Manuel utilisateur
Axminster
Axminster WORKSHOP AW1400B Manuel utilisateur
Axminster
Axminster RSS16E Hobby Series Instructions d'installation
Axminster
Axminster AWFS18 Manuel utilisateur
Axminster
Axminster Hobby Series Manuel utilisateur
Axminster
Axminster AWHBS250N Manuel utilisateur
Axminster
Axminster PROFESSIONAL AP3086B Manuel utilisateur
Axminster
Axminster Excalibur EX-16 Manuel utilisateur
Axminster
Axminster MJ12-1600 MK11 Manuel utilisateur
Axminster
Axminster Excalibur EX-16 Manuel utilisateur
Axminster
Axminster 250mm Slide Mitre Saw Manuel utilisateur
